Jetting CR125 Shifter Kart 4+

ISEnet

專為 iPad 設計

    • HK$ 58.00

螢幕截圖

描述

This app provides, for the current weather conditions and a given engine configuration (air filter type, pump type, etc.), a jetting recommendation for Stock Moto / Mod Moto shifter karts with Honda CR125 engines that have Keihin PWK 38 or PWM 38 carbs.

In order to get the weather values, the application can use the location service (GPS or WiFi) to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS, WiFi and internet connection, in this case, the user has to give the weather data.

The application is made up of four tabs that are described next:

- Results: in this tab, the recommended jetting is shown. It's calculated depending on the weather conditions and the engine and track configuration given in the next tabs. For the jetting setup, the following values are given: main jet, needle type and clip position and pilot jet. Under the recommended main jet, the calculated real value with decimals is shown. It assumes the usage of a #6 slide. Besides this jetting information, the air density and density altitude are shown too. In addition, this tab lets do a fine tunning adjustment for the main (high), needle (mid) and pilot (low) circuits for the jetting setup to adapt to the concrete engine. These values will be stored and used in the future sessions.

- Weather: you can set the values for current temperature, pressure, altitude and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).

- Engine: you can set in this screen the information about the engine, that is, the class (Stock Moto or Mod Moto), the air filter type (clamp-on air filter, airbox with or without filter), the fuel feed system (pump-around, non pump-around), the oil mix ratio and the type of the circuit (spring or road racing, short or long). Depending of the track type, the jetting setup will be adapted.

- GPS: This tab allows to use the location service (using GPS or WiFi) to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).

The app let you use different measure units: ºC y ºF for temperatures, meter and feet for altitude, and mb, hPa, mmHg, inHg y atm for pressures.

最新功能

版本 1.5

Minor adjustment in the calculation model after testing on the dynamometer.

App 私隱

開發者表明ISEnet的私隱慣例或包括下列資料的處理。詳情請參閱開發者的私隱政策

不會與你連結的資料

開發者可能會收集以下資料,但不會連結你的個人身份:

  • 位置
  • 識別碼

私隱慣例或因使用的功能或年齡等因素而異。進一步了解

支援

  • 家人共享

    啟用「家人共享」後,多達六位家庭成員可以使用此 App。

更多此開發者的出品

Jetting for IAME kart engines
運動
Kart Chassis Setup Premium
運動
化油器的的Rotax Max EVO
運動
Jetting for Vortex KZ Kart
運動
Jetting for DellOrto VHSB PRO
運動
Jetting for DellOrto VHSH PRO
運動

你可能也喜歡

Jetting for World Formula Kart
運動
Jetting for Honda CR 2T Moto
運動
Jetting Briggs LO206 Kart
運動
Jetting Modena KZ1 / KZ2 Kart
運動
Jetting IAME KZ1 / KZ2 Kart
運動
化油器 Jetting for TM KZ ICC Kart
運動