Straightness Bore center: • Three new measurement methods; 2-Point, 4-Point and Manual Entry. • Possibility to do vertical measurements. Other: • Possibility to connect reference detector in Bore Center, Straightness and Values.

Bugs fixed: • In Adjust view of Straightness Bore Center, the values and the crosshair moves according to adjustment directions. • After adjusting, the values in the table and the graph are updated accordingly.

Shaft programs - The filter only goes up to filter level six in Horizontal, Vertical, Machine Train and Cardan. With faster acquisition of data Straightness Bore center - Adjustment view added for Straightness Bore Center. Tap the “Adjust” button to access this - Possibility to create templates for Straightness and Bore Center - A roundness graph has been added to Measure and Result views - Tolerance colors added to Measurement data table on the Report page Other - Now possible to calibrate the electronic levels on the XT20/XT22 laser transmitter using XT9 - Firmware for XT290 has been updated to the latest version - The manual now describes the new OLED functionality for XT40, XT50, XT60, and XT70 Fixed bugs - All translated texts are now visible on Bore center measure and result views - Fixed a bug when using other reference mode than Raw. This could cause issues with zeroing in Live device

Fixed a bug with values not being updated correctly when using Sweep mode in Horizontal Shaft. The values became sorted in the wrong way. The bug was triggered when using certain timezones.

Bugs fixed: • When using Manual entry in Machine train, the adjusted value is now updated for the affected coupling. • XT40 measuring units can be updated again. • Added confirmation that an email has been sent on XT11 and XT12. • Several linguistic errors has been corrected in manual and app. Languages: • Instruction manual now available in Thai and Vietnamese. Firmware update packages for a number of units have been updated or added to this release.

Possible to display a target during measurement in Straightness Bore center. It is possible to zero set and halve the value. This does not affect the measurement. Bugs fixed Better support for low-resolution tablets. Faster updates of Live values on the Adjust page in Horizontal. Several linguistic errors have been corrected.

Data collection: When tapping “OK”, you allow Easy-Laser to collect anonymous usage and diagnostics data, for example what measurement programs are being used. This helps us make this app better. No personal data, for example actual measurement data, results or reports, will be collected. You can change your choice at any time in Settings > System information. • Data collection added. • A pop-up to inform the user regarding this. It is possible to change the decision later in Settings > System information. Straightness Bore center: • Unit information added in Prepare view. • Possible to halve and zero set value when having the live device zoomed in Connect view. • Updated distance icon on Prepare, Measure and Result views, makes it clear that distance is measured from the first bore/position. • More clear which bore has been measured, checkmarks added. Languages: • Two new languages added in the app, Thai and Vietnamese. Not available in the manual yet.

- In Machine train, it is now possible to adjust any of the measured couplings. The user is asked to ensure that the distances are correct. - A PLUS button added to the start view. When pressed, more information regarding Easy-Laser PLUS is shown. - Improved scaling in the live adjust view for Shaft Horizontal. - It is now possible to remove old mail adresses from the list “Previously Used” on XT11/XT12.

New measurement method in Machine Train program, Manual Entry! Various bug fixes.

* Straightness Bore Center program added! Measure the straightness of bore center lines, bearing journals, and other cylindrical objects. The XT9 or XT70 can be used as detectors. * A Prepare view has been added to the Straightness program. * XT9 detector available in Straightness, Straightness Bore Center and Values. * Built-in Turkish manual. * More responsive Start screen. * Fixed occational lagging in Horizontal Adjust. * Take multiple photos within the same minute. * Translation fixes.

Shaft: * Adjust view in Horizontal, the tab for live adjustment modes is now expanded by default. * Lock feet available in Machine view. Fixed bugs: * The QR scanner could sometimes crash. * There were problems displaying values in the Vibration program for certain languages. * Reimplemented locked feet icons in Machine train. * Locked feet were not set by default on all S-machines when switching image in Configuration.

* Improved app performance. * Turkish language support. * Stability fixes to PLUS functionality.

Easy-Laser PLUS™: This is our cloud solution where you can: • Collect all your measurement files in one place for quick overview and analysis. • Restore deleted files. In Settings, just pair your XT app to Easy-Laser PLUS™ and all files in your File manager are automatically uploaded to Easy-Laser PLUS™. For information on how to pair your XT app to Easy-Laser PLUS™, follow the instructions in the XT app User Manual: GENERAL INFORMATION > Easy-Laser PLUS. For more extensive information regarding all Easy-Laser PLUS™ features, see www.easylaser.com. Bugfixes: • When you mirror machines in Horizontal, they are correctly placed in the V/H view. • Sweep readings are now visible.

Shaft horizontal: • Both machines are visible in V/H view. • Possible to toggle between V, H and V/H. Fixed problems with: • Reversed Softfoot results for the S machine in the report. • Lock feet did not work in a mirrored view. • Icons in Adjustment view were not visible.

General • Fixed a bug where XT11 would freeze after a while. • It is now possible to change the logo in the report again. • Minor translation fixes. Shaft • Graphs in Adjust view. It is now possible to select Graph view when adjusting. • Changed layout of the graphs in Result view. • Lock feet: Same procedure in both Horizontal and Machine train. Possible to lock only one pair of feet. • Updated train report, now showing tolerance indicators and warnings. Filter • Enhanced filters

Updated the default report names for Horizontal, Cardan and Belt. Various bug fixes.

ALL PROGRAMS • Added support for sending emails to multiple recipients by separating with space, comma or semicolon. • Improved file naming when working with templates. The name of the template will be suggested when Finalizing the measurement. • Photos are not added (and saved over) automatically to reports anymore and must instead be added manually in the report. SHAFT • Improved machine train report. The first page of the report now shows more information. • Added RPM input field to Cardan Prepare view. • Changed icons for vertical foot adjustment in Shaft programs. Previous icon was not clear and has been changed to arrows. • Increased threshold for Sweep direction error slightly. • Fixed a bug with the default name when adding a custom tolerance. • Fixed a bug with detector serials in reports. In some cases they would say “Demo” even though real ones were used OTHER • Added possibility to toggle 24h/12h time format in Vibration report. • Added unit information to Values autorecord settings. • Fixed a bug and re-added Twist to XT550. • Fixed a bug with time format. • Various minor visual bug fixes.

• New background image. • Changed the default tolerance in Cardan. • Fixed a connection problem in Horizontal. • In EasyTrend, fixed a problem with the start and stop line. • Several minor translation fixes. • Several minor visual bug fixes.

Various bug fixes.

SHAFT • Simulations made in the Adjustment Guide will no longer affect the adjustment view. Your simulated adjustment values will NOT be saved and used in the Adjustment view. • The latest measurement method used is now permanent until another method is selected (for example 9-12-3 or EasyTurn). • The selected measurement method is saved after doing a Softfoot measurement. • The latest measurement method used, will be reselected for new measurements. • The result view (table, graph or machine) is now permanent until another view is selected. • The latest result view used, will be reselected for new measurements. • Fixed a bug and re-added XT50 to Cardan. • It is no longer possible to select other measuring units while in the middle of a Sweep measurement for example. EASYTREND • Added start and end date to the EasyTrend report. • Not possible to finalize the measurement while measuring. You need to stop the measurement before finalizing it. Values • Added the button “Delete All” to delete all registered values. • Fixed the icon for angle settings in Values. • Fixed an issue halving and zero setting the value. It now works in the same way if you do it from a single live device as if you do it for all the Live devices at the same time. BELT • Fixed an issue with sheave width. ALL PROGRAMS • You now need to register a measurement value before finalizing a measurement. • All reports now have unit information. Units was for example missing for sheave width and diameter in the Belt program. • Fixed some report template thumbnails and names. • More descriptive e-mail error message when missing wifi. • It is no longer possible to change photos in report while report is being regenerated. • Several minor translation fixes. • Several minor visual bug fixes.

• The manual now includes Finnish. • The manual has a new look, better for smaller screens. • In Softfoot, the foundation is scaled up for large machines. • Various bug fixes in Straightness.

• An issue was fixed where the app would not start for certain users.

• Fixed a bug in detector update. It did not always show 100% progress upon completion. • Fixed a bug in Horizontal Shaft, in graph result view in mirrored mode. • Fixed a bug that blocked deselection of offline devices in device lists. • Bug fixes related to Notes and Comments in reports.

• Fixed a bug with XT280 Vibrometer on iOS. • Various other bug fixes.

• Nuevo programa de medición «Rectitud». • Nuevas imágenes de máquina en los programas de alineación de ejes y de tren de máquinas. • Compatibilidad con nuevos transmisores láser XT. • Manejo mejorado del dispositivo en el programa Valores. • Admite el idioma finlandés. • Admite distintos formatos de fecha y hora en los informes. • Compatibilidad con iOS 15. • Se han solucionado varios errores.