- improved AUv3 behavior when the host is cycling around a loop. - fixed issue where the more menu's navbar/toolbar had a clear background when presented in some AUv3 hosts.

- renamed to Fugue Machine Classic to coincide with the release of Fugue Machine Rubato

- fixed a potential launch issue affecting the standalone app when running on iOS 12

- Fugue Machine Audio Unit (FMAU)’s timeline now properly restarts when its AUv3 Host sends it a Reset message. AUv3 Hosts send Reset messages to plug-ins in various situations, most notably here when you use the host to enable/disable loaded instances of FMAU. Prior to this version, if an instance of FMAU and its host were both running, if you were to disable the FMAU instance and then enable it again, there would be a CPU spike the moment you enable it. Fixed now. And thanks to the fix, a new possible use case: enabling/disabling instances of FMAU in the host now effectively launches/stops them on the host’s musical grid, which can be quite fun. Thanks to Gavinski of Gavinski’s Tutorials for catching the issue and inspiring the new use case.

- Updated network permissions, resolving an Ableton Link connection issue introduced in 1.5.17 - Updated About page

- updated Audiobus

- More Button now becomes lit when presenting the More Menu - cleaned up More Menu formatting - cleaned up Launch Screen - simplified Newsletter signup process - built with latest SDK - replaced deprecated methods

Fugue Machine 1.5 — iPhone support, AUv3 support, more scales, piano roll gesture improvements, and more. See 1.5.0 Version History for more info. 1.5.16 MINOR UI FIXES iOS 13 caused a few UI issues in the More Menu. All fixed now. NEW MORE MENU POSITION (iPhone) The new position no longer blocks the bottom toolbar buttons or the transpose control, making Fugue Machine more playable when the menu is open.

Fugue Machine 1.5 — iPhone support, AUv3 support, more scales, piano roll gesture improvements, and more. See 1.5.0 Version History for more info. 1.5.15 Minor UI fix. When Loop Length was set greater than 1 bar, bar masks in the Piano Roll weren't shown properly. Fixed now.

Fugue Machine 1.5 — iPhone support, AUv3 support, more scales, piano roll gesture improvements, and more. See 1.5.0 Version History for more info. 1.5.14 Version 1.5.13 changes caused factory presets to no longer load in AUv3 instances. Fixed now.

Fugue Machine 1.5 — iPhone support, AUv3 support, more scales, piano roll gesture improvements, and more. See 1.5.0 Version History for more info. 1.5.13 Fixed issue caused by changing Loop Length to smaller values. If you had notes in a measure being removed, the notes wouldn't be removed initially. This was usually harmless, but in some very specific cases, could cause a crash when moving or duplicating notes. Fixed now.

Fugue Machine 1.5 — iPhone support, AUv3 support, more scales, piano roll gesture improvements, and more. See 1.5.0 Version History for more info. 1.5.12 Fixed MIDI issue experienced after bringing app to foreground after a long period of not running in the background. If MIDI Clock was enabled, when hitting Play, there would sometimes be a temporary hiccup. Sorry about that, fixed now.

Fugue Machine 1.5 — iPhone support, AUv3 support, more scales, piano roll gesture improvements, and more. See 1.5.0 Version History for more info. 1.5.11 - no code changes, only App Store edits. - sorry about all the updates, hopefully done now.

Fugue Machine 1.5 — iPhone support, AUv3 support, more scales, piano roll gesture improvements, and more. See 1.5.0 Version History for more info. 1.5.10 Changes - App Store edits.

Fugue Machine 1.5 — iPhone support, AUv3 support, more scales, piano roll gesture improvements, and more. See 1.5.0 Version History for more info. 1.5.9 Changes App Store edits (last one I promise).

Fugue Machine 1.5 — iPhone support, AUv3 support, more scales, piano roll gesture improvements, and more. See 1.5.0 Version History for more info. 1.5.8 Changes App Store things.

Fugue Machine 1.5 — iPhone support, AUv3 support, more scales, piano roll gesture improvements, and more! See 1.5.0 Version History for more info. 1.5.7 Changes App store things.

Fugue Machine 1.5 — iPhone support, AUv3 support, more scales, piano roll gesture improvements, and more! See 1.5.0 Version History for more info. 1.5.6 Changes Fixed minor UI issue when reducing note length via one-finger-pan. When moving slowly, if the note was greater than 1 step, it would snap to the previous step momentarily, then back to the proper step under your finger. Fixed now.

Fugue Machine 1.5 — iPhone support, AUv3 support, more scales, piano roll gesture improvements, and more! See 1.5.0 Version History for more info. 1.5.3-1.5.5 CHANGES PER-PLAYHEAD MIDI CHANNELS (AU) Similar to the standalone app, you can now set per-playhead MIDI channel in the AU. For more details, see More Menu > Settings > MIDI Output Settings (in the AU). NOTE-LENGTH CHANGE DETECTION Improved one-finger note-length change detection. Much better at higher zooms now. As before, simply pan-right at a note's right-edge to change its length. CHANGED AU NAME The AU is now simply named 'Fugue Machine'. Some users were having trouble finding the previous name, 'FM.au'. Please note, depending on your AU host, this may cause issues. It should be fine, but if do you experience any issues, try opening the Fugue Machine standalone app and restarting your device. If that doesn't work, send me an email and we'll sort it out.

Fugue Machine 1.5 — iPhone support, AUv3 support, more scales, piano roll gesture improvements, and more! See 1.5.0 Version History for more info. 1.5.4 CHANGES Nothing significant, just made some clarifications to the 1.5.3 version history. Also, if you're using Cubasis and unable to open a project due to the Fugue Machine AU name change, please send me an email. 1.5.3 CHANGES PER-PLAYHEAD MIDI CHANNEL SETTINGS IN AU Similar to the standalone app, you can now set per-playhead MIDI channel in the AU. For more details, in the AU, go to More Menu > Settings > Midi Output Settings. NOTE-LENGTH CHANGE DETECTION Improved one-finger note-length change detection. Much better at higher zooms now. As before, simply pan-right at a note's right-edge to change its length. CHANGED AU NAME The AU is now simply named 'Fugue Machine'. Some users were having trouble finding the previous name, 'FM.au'. Please note, depending on your AU host, this may cause issues. It shouldn't, but if it does, opening the Fugue Machine standalone app and go back to your AU host. If that doesn't work, try restarting your iPad. And if that doesn't work, please send me an email and we will sort it out. REMINDER: MOVING PATTERNS BETWEEN AU AND STANDALONE Just a reminder that you can move patterns between AU and standalone via copy/paste. • To copy/paste in the standalone, go to More Menu > Patterns, and swipe-right on the pattern. • To copy/paste in the au, go to More Menu, and scroll to the bottom for the copy/paste buttons.

Fugue Machine 1.5 — iPhone support, AUv3 support, more scales, piano roll gesture improvements, and more! See 1.5.0 Version History for more info. 1.5.3 CHANGES MIDI OUTPUT SETTINGS (AU) Similar to the standalone app, you can now set per-playhead MIDI channel in the AU. For more details, in the AU, go to More Menu > Settings. NOTE-LENGTH CHANGE DETECTION Improved one-finger note-length change detection. Much better at higher zooms now. As before, simply pan-right at a note's right-edge to change its length. CHANGED AU NAME The AU is now simply named 'Fugue Machine'. Some users were having trouble finding the previous name, 'FM.au'. Please note, depending on your AU host, this may cause issues. If you experience any issues, simply open the Fugue Machine standalone app and go back to your AU host. If that doesn't work, try restarting your iPad.

Fugue Machine 1.5 — iPhone support, AUv3 support, more scales, piano roll gesture improvements, and more! See below for more info... // ======================== // - for 1.5.x changes, see below. // ======================== // NEW FEATURES Fugue Machine is now Universal, making it compatible with iPhone! (This is a free update). Fugue Machine now includes an AUv3 MIDI App Extension! Open your favorite AUv3 MIDI Host and run as many Fugue Machines as you'd like! The Scale parameter now includes Wholetone, Whole Half, Major Blues, Minor Blues, Major Pentatonic, Minor Pentatonic, and Chromatic. Fugue Machine now properly adapts to the size of the view it's in, with pixel-perfect detail for all devices. // ======================== // USABILITY IMPROVEMENTS •The Piano Roll now responds significantly better to gestures. Most noticeably with one-finger note-panning, one-finger note-length changes, and one-finger pan-right note creation. You can now copy/paste Fugue Machine patterns. This works within the standalone app, between the standalone app and AUv3 instances, between AUv3 instances, and between devices. To copy/paste in the standalone app, go to More Menu > Patterns, and swipe-right on any pattern. To copy/paste in an AUv3, go to the More Menu, scroll to the bottom, and use the copy/paste buttons. When moving notes in the Piano Roll, the Keyboard View and Overview View now show the same notes moving in real time. This is useful while moving notes beyond the visible boundary of the Piano Roll. The View Braces (located in Keyboard View and Overview View) can now have each side moved independently, making it much easier to navigate/zoom the Piano Roll. Until now, when you'd perform a gesture on the Piano Roll and move beyond its boundary, the Piano Roll would automatically scroll in the direction of your fingers. No more! Much more usable now I think. However, if you enjoyed this feature, you can reenable it in Settings. // ======================== // ABOUT THIS UPDATE To be honest, most of this update was unexpected! About a month ago, I decided to venture out on a small FM update to take a break from my main project (a new app I've been working on for over 2.5 years!). My only intention was to update the UI to accommodate the new iPads — more specifically, to handle the Home Indicator and the new aspect-ratio of the 11" iPad. Regarding the new aspect-ratio, I realized that the best way to handle it was to completely refactor the UI to handle any aspect-ratio. This was tedious, but eventually led to the idea of supporting iPhone and AUv3, which, after the UI refactor, was surprisingly trivial! The refactor also led to allowing scales of various sizes (making chromatic possible, finally!). Lastly, supporting iPhone meant supporting smaller screens, which inspired most of the usability improvements. Regarding the Home Indicator, the best way I found to handle that was to just make it go away completely! And the only way to do that is with Guided Access. Not only does Guided Access remove the Home Indicator, but as you may know (I had no idea!), it also disables all other OS edge gestures, essentially isolating your app from the OS. So no more accidentally swiping the control center or notifications! For me, for the way I use iOS to make music (one app per iPad), this is the absolute ideal configuration. Anyway, I hope you enjoy the update, it was a blast to work on :] All the best, Alexander / I'm hoping to post some mini tutorial videos on my new Fugue Machine accounts. If interested... @fugue_machine on Instagram @FugueMachine on Twitter // ======================== // 1.5.1 CHANGES - fixed issue where AU wouldn't run on any OS below iOS 12.1. Fixed now at iOS 11.0 and later. // 1.5.2 CHANGES - in 1.5.0 and 1.5.1, copy/paste in the standalone app was achieved by long-pressing on a pattern in the Pattern Menu. Instead, now you swipe-right. Much better.

iPhone support, AUv3 support, more scales, piano roll gesture improvements, and more! See below for more info... // ================================== // NEW FEATURES Fugue Machine now works on iPhone! Fugue Machine now includes an AUv3 MIDI App Extension! Open your favorite AUv3 MIDI Host and run as many Fugue Machines as you'd like! The Scale parameter now includes Wholetone, Whole Half, Major Blues, Minor Blues, Major Pentatonic, Minor Pentatonic, and Chromatic. Fugue Machine now properly adapts to the size of the view it's in, with pixel-perfect detail for all devices. // ================================== // USABILITY IMPROVEMENTS The Piano Roll now responds significantly better to gestures. Most noticeably with one-finger note-panning, one-finger note-length changes, and one-finger pan-right note creation. You can now copy/paste Fugue Machine patterns. This works within the standalone app, between the standalone app and AUv3 instances, between AUv3 instances, and between devices. To copy/paste in the standalone app, go to More Menu > Patterns, and long-press on any pattern. To copy/paste in an AUv3, go to the More Menu, scroll to the bottom, and use the copy/paste buttons. When moving notes in the Piano Roll, the Keyboard View and Overview View now show the same notes moving in real time. This is useful while moving notes beyond the visible boundary of the Piano Roll. The View Braces (located in Keyboard View and Overview View) can now have each side moved independently, making it much easier to navigate/zoom the Piano Roll. Until now, when you'd perform a gesture on the Piano Roll and move beyond its boundary, the Piano Roll would automatically scroll in the direction of your fingers. No more! Much more usable now I think. However, if you enjoyed this feature, you can reenable it in Settings. // ================================== // ABOUT THIS UPDATE To be honest, most of this update was unexpected! About a month ago, I decided to venture out on a small FM update to take a break from my main project (a new app I've been working on for over 2.5 years!). My only intention was to update the UI to accommodate the new iPads — more specifically, to handle the Home Indicator and the new aspect-ratio of the 11" iPad. Regarding the new aspect-ratio, I realized that the best way to handle it was to completely refactor the UI to handle any aspect-ratio. This was tedious, but eventually led to the idea of supporting iPhone and AUv3, which, after the UI refactor, was surprisingly trivial! The refactor also led to allowing scales of various sizes (making chromatic possible, finally!). Lastly, supporting iPhone meant supporting smaller screens, which inspired most of the usability improvements. Regarding the Home Indicator, the best way I found to handle that was to just make it go away completely! And the only way to do that is with Guided Access. Not only does Guided Access remove the Home Indicator, but as you may know (I had no idea!), it also disables all other OS edge gestures, essentially isolating your app from the OS. So no more accidentally swiping the control center or notifications! For me, for the way I use iOS to make music (one app per iPad), this is the absolute ideal configuration. Anyway, I hope you enjoy the update, it was a blast to work on :] All the best, Alexander / I'm hoping to post some mini tutorial videos on my new Fugue Machine accounts. If interested... @fugue_machine on Instagram @FugueMachine on Twitter

iPhone support, AUv3 support, more scales, piano roll gesture improvements, and more! See below for more info... // ================================== // NEW FEATURES Fugue Machine now works on iPhone! Fugue Machine now includes an AUv3 MIDI App Extension! Open your favorite AUv3 MIDI Host and run as many Fugue Machines as you'd like! Requires iOS 11.0 or later. The Scale parameter now includes Wholetone, Whole Half, Major Blues, Minor Blues, Major Pentatonic, Minor Pentatonic, and Chromatic. Fugue Machine now properly adapts to the size of the view it's in, with pixel-perfect detail for all devices. // ================================== // USABILITY IMPROVEMENTS The Piano Roll now responds significantly better to gestures. Most noticeably with one-finger note-panning, one-finger note-length changes, and one-finger pan-right note creation. You can now copy/paste Fugue Machine patterns. This works within the standalone app, between the standalone app and AUv3 instances, between AUv3 instances, and between devices. To copy/paste in the standalone app, go to More Menu > Patterns, and long-press on any pattern. To copy/paste in an AUv3, go to the More Menu, scroll to the bottom, and use the copy/paste buttons. When moving notes in the Piano Roll, the Keyboard View and Overview View now show the same notes moving in real time. This is useful while moving notes beyond the visible boundary of the Piano Roll. The View Braces (located in Keyboard View and Overview View) can now have each side moved independently, making it much easier to navigate/zoom the Piano Roll. Until now, when you'd perform a gesture on the Piano Roll and move beyond its boundary, the Piano Roll would automatically scroll in the direction of your fingers. No more! Much more usable now I think. However, if you enjoyed this feature, you can reenable it in Settings. // ================================== // ABOUT THIS UPDATE To be honest, most of this update was unexpected! About a month ago, I decided to venture out on a small FM update to take a break from my main project (a new app I've been working on for over 2.5 years!). My only intention was to update the UI to accommodate the new iPads — more specifically, to handle the Home Indicator and the new aspect-ratio of the 11" iPad. Regarding the new aspect-ratio, I realized that the best way to handle it was to completely refactor the UI to handle any aspect-ratio. This was tedious, but eventually led to the idea of supporting iPhone and AUv3, which, after the UI refactor, was surprisingly trivial! The refactor also led to allowing scales of various sizes (making chromatic possible, finally!). Lastly, supporting iPhone meant supporting smaller screens, which inspired most of the usability improvements. Regarding the Home Indicator, the best way I found to handle that was to just make it go away completely! And the only way to do that is with Guided Access. Not only does Guided Access remove the Home Indicator, but as you may know (I had no idea!), it also disables all other OS edge gestures, essentially isolating your app from the OS. So no more accidentally swiping the control center or notifications! For me, for the way I use iOS to make music (one app per iPad), this is the absolute ideal configuration. Anyway, I hope you enjoy the update, it was a blast to work on :] All the best, Alexander / I'm hoping to post some mini tutorial videos on my new Fugue Machine accounts. If interested... @fugue_machine on Instagram @FugueMachine on Twitter

// ====================== // BUG FIXES SYSTEM SETTINGS SAVE ISSUES In some cases, system settings were not saved between sessions. This may have caused the welcome screen to show or midi routings to reset on each launch. Resolved now. // ====================== // ABOUT THIS UPDATE Just a quick bug fix :] Also, I'm still hard at work on my new project (13+ months now!). I've never worked on anything for so long... and I'm still super excited about it :] Check my twitter (@alexandernaut) for a short teaser. Anyway, thanks again for your support, and please let me know if anything comes up. All the best, Alexander