Geode Connect 4+
Juniper Systems Inc.
Progettata per iPad
-
- Gratis
Screenshot
Descrizione
GEODE CONNECT is a configuration and communication utility for the GEODE GNSS RECEIVER. It provides the ability to establish communications to the Geode Real-Time Sub-meter GPS/GNSS Receiver, change receiver settings, and displays position, altitude, estimated horizontal error, differential status fix info, speed, heading, satellites in fix and PDOP. Using the Configure Receiver settings menu, select SBAS, Atlas® L-Band, or NTRIP-delivered RTK Float corrections for selectable accuracy to fit your job. The Skyplot screen shows satellites in use for the various supported constellations and their distribution in the sky. A terminal screen is included to allow users a “deep dive” into the actual data output from the receiver, and direct command access. The Receiver Configuration menu provides the ability to control a wide range of receiver settings to suit your work environment.
REAL-TIME SCALABLE ACCURACY GNSS RECEIVER
Looking for a simple yet precise GNSS solution at an affordable price? With the Geode, you can easily collect real-time, sub-meter, sub-foot or decimeter accurate GNSS data without the huge price tag or complexity of other precision receivers. Designed with versatility in mind, the Geode works with a wide range of devices to fit your needs exactly, and is especially useful for bring-your-own-device workplaces. Take the Geode with you mounted on a pole, in a pack, or held in your hand to collect real-time precise GNSS data in harsh environments, using almost any handheld device. For information on the Geode GPS Receiver, visit our product page at www.junipersys.com.
Disclaimer:
Using the Geode Connect software and a Bluetooth connection to the Geode receiver continuously will increase consumption of battery power on your mobile device.
Novità
Versione 2.3.6.0
• Incorrect sign issue for latitude and longitude values between -1 and 0° has been resolved.
• Geode Connect establishes a Bluetooth connection to a previously paired but disconnected Geode only while the app is open.
Use Geode Connect for Windows to install the Geode Bluetooth firmware version 2.1.5 to implement the following updates.
• Allow Blue LED to work with iOS Location Services.
• Improved connection stability when using the Geode for long periods of time on iOS.
• Location Services no longer causes failures on iOS when running at greater than 1 Hz.
Privacy dell’app
Lo sviluppatore, Juniper Systems Inc., ha indicato che le procedure per la tutela della privacy dell’app potrebbero includere il trattamento dei dati descritto di seguito. Per scoprire di più, consulta l’informativa sulla privacy dello sviluppatore.
Dati collegati a te
I seguenti dati possono essere raccolti e collegati alla tua identità:
- Contenuti dell’utente
Dati non collegati a te
I seguenti dati possono essere raccolti ma non vengono collegati alla tua identità:
- Diagnosi
Le procedure per la tutela della privacy possono variare, per esempio, in base alle funzioni che usi o alla tua età. Scopri di più
Informazioni
- Fornitore
-
Juniper Systems, Inc. si identifica come operatore commerciale per questa app e ha confermato che il prodotto o il servizio è conforme alla legge dell’Unione europea.
- Numero DUNS
- 041738340
- Indirizzo
- 1132 W 1700 N LOGAN Utah 843211723 Stati Uniti
- Numero di telefono
- +1 4357531881
- ComplianceTeam@junipersys.com
- Dimensione
- 60 MB
- Categoria
- Utility
- Compatibilità
-
- iPhone
- Richiede iOS 10.0 o versioni successive.
- iPad
- Richiede iPadOS 10.0 o versioni successive.
- iPod touch
- Richiede iOS 10.0 o versioni successive.
- Mac
- Richiede macOS 11.0 o versioni successive e un Mac con chip Apple M1 o versioni successive.
- Lingue
- Età
- 4+
- Posizione
- Questa app potrebbe usare la tua posizione anche quando non è aperta, facendo diminuire l’autonomia della batteria.
- Copyright
- © 2024 Juniper Systems, Inc.
- Prezzo
- Gratis