PCBPad

Sviluppatori

Gratis · Progettata per iPad. Non verificata per macOS.

iPad

PCBPad is a circuit board editor built for Apple Pencil. You route copper by drawing it: the stroke you make becomes a clean track, and the board makes room for it. It runs natively on iPad and Mac, works fully offline, and needs no account. ROUTE WITH APPLE PENCIL • Draw from pad to pad: the stroke becomes a copper track with 45° corners, snapped to the grid, and it ends up where your hand went. • Tracks in the way move aside (push and shove). Copper that cannot move is routed around. • The clean-up is checked against pads, holes and keepouts. If the track still touches one, the app tells you which. • One stroke draws a differential pair. A serpentine adds the length a pair is missing. • No Apple Pencil? One finger draws and two fingers navigate. On Mac, drag to draw. • Two-finger tap undoes, three-finger tap redoes, hold one finger for the radial menu. PRIVATE BY DESIGN • No account, no login, no server, no analytics, no ads. • Your boards stay on your device, or wherever you keep them in the Files app. PCBPad never uploads them. OPENS AND SAVES KICAD FILES • PCBPad opens and saves .kicad_pcb and .kicad_sch files directly. There is no import step and no conversion. • Only the bytes you change are rewritten. The file goes back to KiCad as it was, plus your edits. • Tested on real projects, including the KiCad 10 file format. START A BOARD HERE • Draw the board outline, then correct it with numbers. Constrain a sketch, or import an outline from DXF. • 1,901 footprints and 15,123 symbols from the official libraries, bundled and available offline. • Tap two pads to declare a net. The ratsnest shows what is left to connect. • Copper planes with a real fill, via stitching, keepouts, blind and buried vias. • Text, logos and dimensions on the silkscreen. • A footprint editor for the part that no library has. SCHEMATIC • Place parts, wire them, move them: wires stay attached. • Multi-unit parts, hierarchical sheets, and a symbol editor. • Compare the schematic with the board and apply the differences after a preview. CHECK BEFORE YOU ORDER • Design rules written as formulas: clearance, track width, annular ring, hole-to-hole, unconnected nets. • Limits taken from the published capabilities of three board fabricators, with the source and the date they were read. • See what changed between two versions of the same board. SEE IT, THEN MAKE IT • A 3D view of the board, with component bodies sized from their package names. • Gerber X2 with a job file, Excellon drill, bill of materials and pick-and-place, in one ZIP. • The package is read back and shown layer by layer before you send it. • STEP and STL for your enclosure, and panels of several boards. In English and Italian. Requires iPadOS 18 or later, or a Mac with Apple silicon. KiCad is a trademark of the Linux Foundation. PCBPad is an independent app. It is not made by, endorsed by or affiliated with the KiCad project. Questions and bug reports: pcbpad.app@gmail.com

Valutazioni e recensioni

  • L’app non ha ricevuto un numero sufficiente di valutazioni o recensioni per poter mostrare una panoramica.

Lo sviluppatore, Lorenzo Dard, ha indicato che le procedure per la tutela della privacy dell’app potrebbero includere il trattamento dei dati descritto di seguito. Per scoprire di più, consulta l’informativa sulla privacy dello sviluppatore .

  • Dati non raccolti

    Lo sviluppatore non raccoglie alcun dato da quest’app.

    Le procedure per la tutela della privacy potrebbero variare, ad esempio in base alle funzionalità che utilizzi o alla tua età. Scopri di più

    Accessibilità

    Lo sviluppatore non ha ancora indicato le funzioni di accessibilità supportate dall’app. Scopri di più

    Informazioni

    Dimensioni
    169,4 MB
    Categoria
    Sviluppatori
    Compatibilità
    Richiede iPadOS 18.0 o versioni successive.
    • iPad
      Richiede iPadOS 18.0 o versioni successive.
    • Mac
      Richiede macOS 15.0 o versioni successive e un Mac con chip Apple M1 o versioni successive.
    Lingue
    Italiano e Inglese
    Età
    4+
    Fornitore
    Lorenzo Dard
    • Lorenzo Dard non si identifica come operatore commerciale per questa app. Se ti trovi all’interno dello Spazio economico europeo, i diritti dei consumatori non si applicano agli accordi tra te e il fornitore.
    Copyright
    © 2026 Lorenzo Dard
  • Sito web sviluppatore
  • Informativa sulla privacy