In this update (1.2.5): - Note chopping function added in the Note Editor. Select note(s) and move the "Chop" dragger. Selected note(s) will be split into a number of equal pieces. Hold SHIFT while moving for the numbers of power of two. Very useful for polyrhythmic tricks. - Note warping function added in the Note Editor. Works on a selected row of notes (e.g. on a drum fill), changes notes timing by creating smooth acceleration or deceleration. Select a row of notes, then hold down SHIFT ("Chop" dragger will turn into a "Warp") and then move the "Warp" dragger up for acceleration or down for deceleration. - Chop to Grid: new function added in the Note Editor's operations menu. It chops selected note(s) into smaller parts using current Grid Snap setting. - Halve and Double note timing functions in the Note Editor are now automatically modifying clip's loop range, if no notes were selected before the operation. - pattern load optimisations; - m4a sample format support added (for internal Sampler); - fixed issue with renaming folders that contain dot symbol in their name; - CPU load/energy optimization: GR-2 will now drop its graphics to 30 FPS every time user opens the AUv3 window. And then restores it back after the window is closed; - other minor bug fixes and improvements. In previous update (1.2.4): - added Acid Riff Generator (ported from the JimAudio Pure Acid app), accessible from Clip Editor, Melodic Parts only. You can select Scale, Key, Octaves range and one from 6 available generator modes; - added Legato setting for the internal synth/sampler/wt/sf2, located on the lower end of the POLYPHONY knob in synth's settings. When set to Legato, a synth will get 1 voice polyphony and slide from one pitch to another, when notes overlap, using GLIDE knob's value. This is especially useful when playing 303-style note slides; - added new Pitch Delay IFX, in 4 combinations (mono/stereo, bpm/free). It is combines Delay effect with Pitch Shifter, where every next repeat is being shifted up or down; - added One Tap Delay IFX, which adds one single repeat to the original sound with adjustable Pan, Time delay and Mix; - Stereo Width IFX: added new Balance knob, which adjusts panning of the stereo-Side channel; - added mono versions of Chorus and Flanger effects; - STEPS pad mode improvement: you can now write automation per step by holding a step pad (or even several) and simultaneously moving a parameter knob on the Sound page. This method can also be used with AUv3 instruments. - added one more "Parallel Special 3" setting to the MFX routing on the FX Buses page; - crash fixed when creating a new folder in the empty user presets tab in the Browser; - fixed: some LFO timings (3/8, 3/16) were performing incorrectly; - added a solution which can prevent issue with partial UI freezing after using certain AUv3's. However, if the issue still persists, you can now tap the Stop button to clear touches cache and unfreeze the UI; - added a new keyboard shortcut CMD+M to toggle Metronome Click On/Off.

- added Acid Riff Generator (ported from the JimAudio Pure Acid app), accessible from Clip Editor, Melodic Parts only. You can select Scale, Key, Octaves range and one from 6 available generator modes; - added Legato setting for the internal synth/sampler/wt/sf2, located on the lower end of the POLYPHONY knob in synth's settings. When set to Legato, a synth will get 1 voice polyphony and slide from one pitch to another, when notes overlap, using GLIDE knob's value. This is especially useful when playing 303-style note slides; - added new Pitch Delay IFX, in 4 combinations (mono/stereo, bpm/free). It is combines Delay effect with Pitch Shifter, where every next repeat is being shifted up or down; - added One Tap Delay IFX, which adds one single repeat to the original sound with adjustable Pan, Time delay and Mix; - Stereo Width IFX: added new Balance knob, which adjusts panning of the stereo-Side channel; - added mono versions of Chorus and Flanger effects; - STEPS pad mode improvement: you can now write automation per step by holding a step pad (or even several) and simultaneously moving a parameter knob on the Sound page. This method can also be used with AUv3 instruments. - added one more "Parallel Special 3" setting to the MFX routing on the FX Buses page; - crash fixed when creating a new folder in the empty user presets tab in the Browser; - fixed: some LFO timings (3/8, 3/16) were performing incorrectly; - added a solution which can prevent issue with partial UI freezing after using certain AUv3's. However, if the issue still persists, you can now tap the Stop button to clear touches cache and unfreeze the UI; - added a new keyboard shortcut CMD+M to toggle Metronome Click On/Off; - other minor bug fixes.

Multi tool improvements for the Clip Editor and Song Page: - Selection tool: double tap to add or delete a note; - Selection tool: right after selecting a bunch of notes, you can now tap the Eraser tool icon (it changes color) to delete selection, while still staying in the selection tool mode; - Pencil, Brush, Erase, Mute tools: you can now use 2 finger gestures to move/zoom note view; Other features: - added audio interface input selection. Now you can select the input channel for recording from the Settings -> Audio -> Audio Input; - Sample Editor's waveform display was sometimes showing random spikes during recording an audio sample - fixed; - several memory leak issues has been fixed; - other minor bug fixes.

Presets Sharing: - added user presets Exporting and Sharing! You can share individual presets and even entire preset folders as a single bank file! Sharing is done from the Browser window: select one or several presets and tap the share icon in the bottom panel; - the new .g2 / .g2b preset file format can store a single preset (.g2 file) or multiple presets (.g2b file), containing all the necessary samples and sf2 banks inside a single preset file! - to export all user presets, go to Settings -> Export -> Export All User Presets. Midi Clips Export: - added Exporting of Midi Clips (on the Clips page - from the clip long hold menu, and on the Song page). A midi file can be either shared or saved into the Browser's Midi Files tab at your choice. Browser: - added nested folders support in the Browser -> Layer / Part / Drum Rack Preset tabs; - added multi selecting of files in the Browser (hold down SHIFT button), works inside all tabs of the User Bank; - added file managing tools panel in the Browser, allowing to create folders, rename and delete files/folders, moving files into sub-folders, share files (for presets). Panel is available for all tabs of the User Bank. Sample Editor: - now you can zoom the sample using only one finger (swiping/dragging along the vertical axis). Launchpads: - added new setting to allow user to set up the Pad Mode on the LP directly from the GR-2 interface on iPad. In case you need this, go and enable Settings -> Launchpad -> "Set mode from UI" option. Visual: - added a matte (blur) background effect on the Selector window, Settings window and popup menus. Can be switched off from the Settings -> General -> System -> Transparency FX; - added dark mode and tinted mode app icon. Misc: - added a small diagnostics tool in the Settings -> General -> Diagnostics, to check GR-2 internal sample cache. Allows to find out if some samples are missing due to system crashes or errors, as well as to cleanup unused cache that is holding disk space without a reason; - added a detection of the infinite clipping output from the buggy AUv3's, which sometimes can occur and cause the whole app to stop producing any sound. Now, if the glitch will be detected, the audio unit that caused it will be automatically deactivated, not interrupting the playback; - fixed bug with SF2 player synth, when setting its Poly parameter to 2, 3 or 4 allowed to play one voice only; - other minor bug fixes.

In this update: - fixed issue with Scaler 2 and similar Midi FX units, which caused asynchronous playback/recording of midi notes; - fixed issue with Print Midi function, when long notes were recording sometimes; - internal Poison-202 presets can now be accessed by tag groups (e.g. Bass, Leads, Strings...). Tags have been added as additional folders to the Poison-202 presets list table. Previously there were only Bank A - F and User folders available; - removed redundant popup dialog "Create Empty Sample?" in the Sampler when tapping the EDIT... button; - other minor bug fixes. In previous update: Introducing support for the legendary Akai APC40 mkII midi controller! Brief instructions on the device: -- press SESSION button to navigate between Sound, Clips and Mixer page; -- press clips to launch or stop clips; -- press Scene buttons to launch specific clip scene; -- press SHIFT + clip button to instantly open it in the Clip Editor; -- hold down SHIFT button and double press any empty clip button to create new empty clip; -- use four arrow buttons to browse the clip grid in all directions; -- use Cue knob to scroll the clip grid along X and Y (with SHIFT) directions; -- you can also assign Cue knob to work as a Relative type Midi CC instead of scroller from the Settings -> APC40 mkII menu; -- hold down SENDS button to switch between Send A mode (press Track 1) and Send B mode (press Track 2); -- hold down USER button to switch between User CC mode (press Track 1) and Part Level mode (press Track 2); -- use DEVICE and BANK arrow buttons to select a device with knobs to control; -- use DEVICE LOCK button to prevent chosen device from being deselected or switched; -- some devices can be turned on/off by DEV ON/OFF button (example: IFX devices, AUv3 devices); -- DETAIL VIEW button toggles corresponding views on the central GR-2 display for some devices; -- CLIP/DEV VIEW button, REC ARM and A/B track buttons have no effect as they do not have a dedicated function yet; -- BANK button enables clip grid to be scrolled by pages (instead of clip by clip); -- use Crossfader when you're in the Pattern Cross Mixer window to transition between patterns (it controls the Mix fader); -- track faders can be set to Jump mode, Catch mode or entirely switched off from the Settings -> APC40 mkII menu; -- User CC knobs (8 track knobs when the USER button is enabled) are set to Absolute type Midi CC by default, but can be changed to Relative type Midi CC from the Settings menu; -- other functions work similar to how APC40 works with Ableton Live; Other fixes and improvements: - All the Launchpad and APC40 related settings were moved into two separate sub menus of the Settings page with the new dedicated icons; - when importing midi clips into the Drum Rack part, the clip is now automatically converted to be played by Drum Rack; - Arpeggiator and Groove knobs (on the Part Parameters page) can now be midi learned; - added an option to change double tap speed to a slower one in the Settings -> General -> System -> Double Tap Speed; - fixed: incorrect recognition of absolute/relative midi CC types during the Midi Learn; - Launchpad's "MIDI" Port is now automatically connected as a midi source without occupying the GR-2 Midi Input Port; - fixed: after moving the Layer left/right, the recorded AUv3 automation on that Layer stopped working and showed "No Name"; - fixed: On Launchpads. When changing pattern, fader colors were not correct unless you reenter the mixer mode; - fixed: No Undo for recording external midi notes.

Introducing support for the legendary Akai APC40 mkII midi controller! Brief instructions on the device: -- press SESSION button to navigate between Sound, Clips and Mixer page; -- press clips to launch or stop clips; -- press Scene buttons to launch specific clip scene; -- press SHIFT + clip button to instantly open it in the Clip Editor; -- hold down SHIFT button and double press any empty clip button to create new empty clip; -- use four arrow buttons to browse the clip grid in all directions; -- use Cue knob to scroll the clip grid along X and Y (with SHIFT) directions; -- you can also assign Cue knob to work as a Relative type Midi CC instead of scroller from the Settings -> APC40 mkII menu; -- hold down SENDS button to switch between Send A mode (press Track 1) and Send B mode (press Track 2); -- hold down USER button to switch between User CC mode (press Track 1) and Part Level mode (press Track 2); -- use DEVICE and BANK arrow buttons to select a device with knobs to control; -- use DEVICE LOCK button to prevent chosen device from being deselected or switched; -- some devices can be turned on/off by DEV ON/OFF button (example: IFX devices, AUv3 devices); -- DETAIL VIEW button toggles corresponding views on the central GR-2 display for some devices; -- CLIP/DEV VIEW button, REC ARM and A/B track buttons have no effect as they do not have a dedicated function yet; -- BANK button enables clip grid to be scrolled by pages (instead of clip by clip); -- use Crossfader when you're in the Pattern Cross Mixer window to transition between patterns (it controls the Mix fader); -- track faders can be set to Jump mode, Catch mode or entirely switched off from the Settings -> APC40 mkII menu; -- User CC knobs (8 track knobs when the USER button is enabled) are set to Absolute type Midi CC by default, but can be changed to Relative type Midi CC from the Settings menu; -- other functions work similar to how APC40 works with Ableton Live; Other fixes and improvements: - All the Launchpad and APC40 related settings were moved into two separate sub menus of the Settings page with the new dedicated icons; - when importing midi clips into the Drum Rack part, the clip is now automatically converted to be played by Drum Rack; - Arpeggiator and Groove knobs (on the Part Parameters page) can now be midi learned; - added an option to change double tap speed to a slower one in the Settings -> General -> System -> Double Tap Speed; - fixed: incorrect recognition of absolute/relative midi CC types during the Midi Learn; - Launchpad's "MIDI" Port is now automatically connected as a midi source without occupying the GR-2 Midi Input Port; - fixed: after moving the Layer left/right, the recorded AUv3 automation on that Layer stopped working and showed "No Name"; - fixed: On Launchpads. When changing pattern, fader colors were not correct unless you reenter the mixer mode; - fixed: No Undo for recording external midi notes; - other minor bug fixes.

- Launchpad Mini MK3 support added. Quick instructions for the Launchpad Mini MK3 users: - press Session button to switch between Performance Mode (blue) and Session Mode (green). - in Performance Mode, use the top 3 right hand buttons (">") to select between Performance, Step Sequencer and Pattern Settings layouts correspondingly. - in Performance Mode, press Up + Down arrow buttons simultaneously to switch to layout editing mode (arrows will start to pulse red), where Up/Down buttons shift the layout, and Left/Right buttons select the Pad Mode for the Block 1. Press Up + Down again to switch back to normal mode, where Up/Down buttons control the Octave, and Left/Right buttons select the Part. - in Performance Mode, press Left + Right buttons simultaneously to toggle between the Bar select mode (buttons become blue). - in Session Mode, the bottom right button (Stop/Solo/Mute) activates the Mixer Mode; - in Mixer Mode, select layout with the right hand buttons (Volume, Pan, Send A/B, Stop Clip, Solo and Mute). Other features of this update: - Midi file import added. Copy your midi files into GR-2 Documents/MidiFiles folder and access them from Browser -> Midi Files tab. Nested folders supported. - added nested folders support for user SF2 folder; - fixed: Arpeggiator now supports note midi channels and works on Drum Rack parts and sliced layers; - fixed: Last Knob Control + AUv3 knobs were working on Part 1 only; - fixed: Last Knob Control + LFO Mod Destinations knobs were working on Part 1 only; - other minor bug fixes.

Added support for the Novation Launchpad X midi controller, with slightly different functionality comparing to the LP Pro MK3. Some instructions for the LPX users: - press Session button to switch between Performance Mode (blue), Session Mode (green) and Mixer Mode (yellow). - Use Record button as Play/Stop. Hold down the Record button to toggle it between Play (green) and Record (red) mode; - in Performance Mode, use Volume, Pan and Send A buttons to select between Performance, Step Sequencer and Pattern Settings layouts correspondingly. - in Performance Mode, press Up + Down arrow buttons simultaneously to switch to layout editing mode (arrows will start to pulse red), where Up/Down buttons shift the layout, and Left/Right buttons select the Pad Mode for the Block 1. Press Up + Down again to switch back to normal mode, where Up/Down buttons control the Octave, and Left/Right buttons select the Part. - in Performance Mode, press Left + Right buttons simultaneously to toggle between the Bar select mode (buttons become blue). - in Mixer Mode, select layout with the right hand buttons (Volume, Pan, Send A/B, Stop Clip, Mute, Solo, Rec Arm). The latter (Rec Arm) only selects the Part. - in Mixer Mode, hold down the Volume button to toggle VU Meters On / Off for the Mute, Solo, Stop Clip and Rec Arm layouts. Other features of this update: - Launchpad: added 4x4 pad layout, selectable from the Settings -> Midi -> Launchpad Pro MK3 / LPX -> Pads Layout; - Launchpad: hold down the arrow buttons to scroll the grid / mixer views. - Launchpad: pressing a slice or drum now selects it in the UI; - Launchpad: you can now set the clip loop length by holding the bar select button and pressing a step; - Launchpad: added Stop Clip layout; - Launchpad: VU Meters in the Mute, Solo and Stop Clip layouts can now be switched off to show the clip grid instead. Use Shift + Volume button on LP Pro, or hold Volume button on LPX; - fixed: when loading a drum rack preset, drum labels were not resetting to the defaults; - fixed: in the Scale mode (Clip Editor), dragging a note down caused incorrect jumping of the view to the bottom of the keyboard; - fixed: Last Knob Control was not working with knobs on Layer > 1, KBD TRK knob and EQ knobs in the Mixer page; - fixed: Last Knob Control was not working with LFO Destination knobs and 9 pre-defined AUv3 knobs; - fixed: GR-2 was sometimes not connecting via Inter-App Audio with the host apps (e.g. AUM) if audio input was enabled and host app started before the GR-2; - relative midi autodetecting improved to not interfere with the regular midi knobs; - other minor bug fixes.

- Midi Output / Virtual Midi Output ports added (disabled by default); - Midi Channel parameter added for each Part, accessible from the Part Parameters page. It is used during the Midi Input and Midi Output; - added Relative Midi knobs support; - added Last Touched Knob Control feature, which allows you to control knobs with a single assigned midi CC: you first touch the desired knob on the screen and then turn your midi controller knob to tweak it. This feature is off by default and needs to be activated from Settings -> Midi -> Midi CC Control menu -> Last Knob Control; - Ableton Link updated to support Start/Stop feature (disabled by default); - Settings Page: various synchronization settings were moved into a separate SYNC menu; - added sample recording Sync function, which allows you to snap start/stop of the audio recording to the beat or bar, allowing to record perfect loops on the fly. It is off by default and is located in the Settings -> Sync -> Sample Editor -> Record Sync; - new mixer-related knobs design for better clarity; - oscillogram visualizer: added plus / minus buttons to change wave zoom factor; - added LUFS level indicator on the main page; - added song time indicator for the Song mode in the top title bar; - added new "Save Pattern" shortcut button, which is now accessible on any screen from the top title bar (the "disc" icon); its brightness depends on how many unsaved changes you have made to the pattern; - added a "song loop on" indicator icon in the top title bar when in the Song mode; - pattern's AUv3 mark in the title bar is moved to the left side of the bar under the CPU meter; - Undo while recording (Song mode): now tapping Undo will not stop the record; - global Metronome setting is split into 2 new separate independent settings: Click (Off, REC, Always On) and Rec Precount (Off, 1 Bar, 2 Bars); - fixed: built-in synths were not reacting to midi pitch bend events, generated by Midi FX units; - several fixes in the Sample Editor, when selection/slice locators were sometimes reset during undo, edit or record; - other minor bug fixes.

Introducing integration with the Novation Launchpad Pro mk3 midi controller, which includes: - Access to the Session clip 16x16 grid from the controller. Launch and stop clips and scenes by pressing the corresponding pad or button. Toggle between Grid mode and Performance mode by pressing Session button; - Hold Clear or Duplicate button on LP Pro and press/swipe pads to instantly delete or duplicate whole groups of clips in the Session Grid from the controller; - Press Shift + Duplicate + Clip pad to instantly double clip's loop size (Duplicate Loop function); - Hold Quantize button + press Clip pad to perform a quantize on clip's notes; - Part Mute and Solo modes with visualized level meters on LP Pro device; - Adjust part Levels, Pan and Send FX Amounts with fader banks, displayed on the LP Pro device; - In Performance mode, four different pad modes (8x2 pads each) can be seen simultaneously, reflecting current GR2 state (Mute, Erase, Trigger, Step, Notes, Chords/Slices/Drums or Jump). Pad mode is selected with red track buttons in the bottom. Shift the layout up or down by pressing Shift + Up or Down arrow button; - Octave selector (red Up/Down arrows), Bar selector for step mode (blue track buttons), Part select buttons (white Left/Right arrows); - Shift + Undo/Redo, Shift + Tap Tempo, Shift + Metronome Click functions; - New extended Step Editor mode (in addition to the standard one), which allows to display up to 32 steps simultaneously on the LP Pro device! Use bar select buttons to browse thru 16 bars of the clip. Add/remove drums or notes from steps, adjust step/note velocities and step probabilities right from the LP Pro device. Press a step to immediately select it in the GR2 Note Editor; - Hold Clear button and tap/swipe the steps to clear them; - Hold Duplicate button, tap a step (Copy) and then tap another step (or series) to distribute (Paste) the source step. Other features and bug fixes in this update: - trigger conditions updated to allow easier assignment of the probability to the group of simultaneously played notes. You just set the condition function to the one "control" note in a group, and then set the "Prev" function to all the other notes. No need to shift the "control" note a bit earlier anymore, because now it has a higher priority over the other notes; - now you can draw velocities of selected notes with the second touch, while holding the velocity dragger with the first touch; - Step mode, step selector: now you can tap on the piano roll (or drum list) in the Note Editor to select the note/drum lane you want to edit steps for. No need to drag up/down the 1st step selector pad; - Step mode: now it works not only on the Note Editor page, but also when the other pages are shown; - Step mode: every new step you add immediately gets selected in the Note Editor; - when using pattern "Save As" dialog, you can now enter a blank name to generate another random pattern name; - Clip text labels added on the Song timeline view. Select clip(s) and go to the hamburger menu -> Rename Clips; - fixed: Midi AU FX can now output various midi data, including midi CC's, Program Change, Aftertouch / Pressure and Pitch Bend events (previously only note events were allowed); - fixed: Erase pad mode was not working properly in the Song Mode; - fixed: incorrect bar numbering for looped clips with non zero loopStart marker was displayed; - fixed a number of issues when the non standard Measure was selected for the Pattern.

- Stems Export added (Settings -> Export -> Export Pattern/Song Stems); - added a progress bar when exporting User Bank, so you can see what's going on; - Cmd+"R" (Record) command added to the keyboard shortcuts list (for external Bluetooth keyboards); - fixed bug with the incorrect timing of the first Arpeggiator's note when played and midi-printed; - other minor bug fixes.

- added text search box in AUv3 lists; - added clip select menu in the Note Editor: tap on the Part/Clip label (under the Stop button) to access clip select menu; - fixed: some AUv3 audio units were not allowing to edit recorded automation; - fixed: on the iPad Mini, AUv3 lists were not fitting the display; - fixed: Part volume was low when the Part Output was assigned to FX A or FX B bus; - fixed: when Scale mode was selected, newly created Clip displayed too high notes when first opened; - fixed: IAA midi input can now be recorded; - fixed: importing a folder with wavetables was broken; - fixed: after duplicating notes in the Note Editor sometimes wrong notes were selected; - fixed: crash when entering Steps mode in certain conditions; - fixed: Part select without sound function (hold Part button + Pad) was working only one time per touch; - fixed: multi-solo in the Mixer (holding Shift + Solo button) was working only one time per touch; - other minor bug fixes.

- IFX Reverb added for the Drum Rack type of parts (one IFX Reverb per Drum Rack Part); - fixed: GR-16 pattern import did not work; - Ableton Link: now the sync works between different devices in the local Wi-Fi network; - added two new Part output destination options - FX A and FX B. Now you can route any Part's output directly to the FX A or FX B bus to use its effect slots as inserts; - added nested folders support for user WaveTables folder; - shortcut added to select Parts with the Pads: hold down the "Part select" button and tap any Pad to quickly go to the corresponding Part; - fixed: BPM label on the main page sometimes was not updating correctly when tempo changed; - several bugs fixed related to the note recording in the Song mode; - other minor bug fixes.

- fixed crash on early iPadOS 16 when tapping "Import Samples From Files..." crashed the app; - fixed crash when loading large sf2 bank file which does not fit in RAM. Instead it now shows the error message; - fixed UI stutter bug which happened when Bluetooth keyboard was connected to the iPad; - fixed: "Edit" was sometimes grayed out in the clip popup menu. Tip: double tapping on a clip also opens the clip editor; - fixed issue when after selecting chromatic scale and exiting it piano roll displayed incorrectly; - fixed: note names were displayed incorrectly in the step selector when Scale Mode was turned on; - fixed: UI freezing when importing folder from Files (process still can take up to several minutes, depends on the system). Now it displays "Importing Folder (in background)" message and lets user to operate the interface; - fixed: zooming issue on a very short samples in the Sample Editor; - other minor bug fixes.

- fixed bug with bluetooth midi devices, which were not connecting properly with GR-2; - fixed crash when reordering parts on the Mixer page; - fixed: part modulation wheel / pitch bend values were not correctly restoring for AUv3 audio units; - added partial support for AUv3 units which do not provide proper support for automation recording, with info message for these audio units; - redefine AU knobs algorithm can now detect some parameters of AUv3 audio units mentioned above (use it when playback is stopped); - added a number of layer and part presets into Factory Bank A; - added random pattern name generator for newly created patterns (shown in Save dialog); - other minor bug fixes.

- added: "Redefine AU knobs" function in the layer hold menu, allowing to assign custom AU parameters for the 9 onscreen AU knobs; - added: Settings -> Midi -> "Midi Learn" with info on how to activate Midi Learn; - fixed: crash when loading Drum Rack Preset during playback; - fixed: crash on menu button tap in the clip editor when there is no current clip selected; - fixed: no undo when adding new empty clip in the clip session grid; - fixed: vertical zoom was often reset in the notes editor when used in Scale mode; - added support for AUv3 audio units which dynamically update their parameter tree; - fixed issue with recording notes into a non-looped (one-shot) clip; - improved displaying the image of the non-looped (one shot) clip in the clip session grid; - "Emulate Ramps" option added in the hold-popup menu for those bus AUv3 effects, which claim to support parameter ramping but in fact do not; - fixed: clip automation was not playing correctly for clips where loop start and cue setting greater than zero; - fixed: part IFX routing was displayed incorrectly; - added: for the hold-down menus you can now swipe directly to the menu item, no need to lift finger up and tap again; - additional minor bug fixes.

- fixed: parameter set change, UI not updating; - fixed: record with REC precount started at wrong bar; - fixed: no Undo for parameter set change/add/delete set; - fixed: start as Inter-App Audio (IAA) showed a blank screen; - fixed: hanging midi notes under IAA mode when host app had Cycle enabled; - fixed: overdub record mode when recorded in song loop.