Unity Client
ビジネス
Macのみ対応
無料
Unity Client is a next generation network-based full-duplex intercom system that is incredibly simple to use, yet is as powerful as traditional systems costing many times more! Unity Client works in conjunction with the Unity Intercom Server, available from www.unityintercom.com.
The Unity Intercom system can be used for a variety of applications
• Multi-camera live video production (including Tally!)
• Fleet/delivery management
• Hotel staff
• Hospitality personnel
• Construction/installation crews
• And many, many more
Works over any IP based network
• Unity Client works using either Wi-Fi or direct ethernet connections. Users can be within the same network as the Unity server, or located around the world communicating over the internet.
External program feed
• Unity server comes with a built-in, sample program feed, but can be upgraded for a custom program feed.
Supports up to 6 channels and 58 users
• Users can be restricted to access any or all of the 6 channels for talk/listen, listen only, or no access.
• Additional users can be purchased, up to a total of 58 simultaneous users on the Unity system.
Private user-to-user communications
• You can communicate with any active Unity user directly in a private communication session. No other users can hear the conversation.
Push notifications
• Push-notify offline users to tell them to join a Unity conversation. Acknowledging the notification starts Unity automatically.
Integrates with external audio I/O
• Upgrade Unity Server to allow audio to be routed to and from an external Com system, effectively creating wireless com stations that work with a traditional hard-wired intercom over any existing network.
External tally support
• The Unity server can be upgraded to accept tally information from a variety of video switching systems, and can send this information to remote Unity app users. Both the Unity Mac Client and Unity iOS devices become actual tally lights, showing both preview and on-air talent tally functionality.
• Great for production environments!
さらに見る コレは使い方さえわかれば楽しく遊ぶことができます。皆さんもアプリを入れてはどうでしょうか。
コレは使い方さえわかれば楽しく遊ぶことができます。皆さんもアプリを入れてはどうでしょうか。
アプリケーションをダウンロードさせてもらったのですが、最初のログインの仕方がわかりません。
アプリケーションをダウンロードさせてもらったのですが、最初のログインの仕方がわかりません。
• Added support for StreamDeck Plus XL
• Fixed some text alignment issues on the keypanel setup page
• Added error messages for audio devices that won't work properly with echo cancel turned on
3.0.32 3月24日
• Fixed UI issue on Tahoe (MacOS 26) where you could not click the top row buttons or the group selection buttons.
3.0.31 2025/09/30
• Added session identifier to eliminate the 'Limit IP Address Tracking' issue. Requires server version 3.0.66 or later.
• Solidified automatic re-login if server is restarted.
• Fixed issue with channel labels and users on IPV6 networks.
3.0.30 2025/08/03
• Adds local network access verbiage for Sequoia and above.
3.0.29 2025/07/10
• Adds support for StreamDeck + and it's encoders (must use latest Streamdeck plug-in, version 1.3).
• Adds support for XKeys XK-12 and USB-3 interfaces (foot pedals and Orby buttons).
• Now supports multiple Streamdeck and XKeys panels simultaneously. You MUST use StreamDeck software with new plugin version 1.3.
• Streamdeck now supports multiple colors for its buttons to better identify functions. (Streamdeck plug-in only, version 1.3).
• Limited support for StreamDeck Studio, using standard StreamDeck software (not Bitfocus Buttons).
• Will still work with Bitfocus Companion plug-in, but will not support multiple StreamDecks if you use this method.
• Added support for program feed selection and program feed volume control from StreamDeck or XKeys.
• Added 'quick select' using the encoder knob on StreamDeck Plus.
• Added PL volume, master volume and program feed volume capability to Streamdeck/XKeys. Also added encoder support for this on StreamDeck Plus.
3.0.28 2025/06/12
• Minor bug fixes and wording changes.
3.0.27 2024/09/20
• Fixes issue where keypanel port number for Bitfocus Companion wasn't being saved properly.
3.0.26 2023/08/07
• Allows you to specify the port number for more flexible BitFocus Companion integration. Makes it possible to control multiple Unity Clients from a single Bitfocus Companion instance.
3.0.25 2023/08/01
• Adds support for Unity Pro, which adds individual partly line volume control and global channels (more than 6 simultaneous channel access). Requires Unity Pro(Protect) subscription and Unity Server version 3.0.50 build 130 or later.
3.0.24 2023/06/09
• Fixed distortion issue with lower resolution bluetooth headsets.
3.0.23 2022/07/20
• Added support for AirPods Pros using the new 24kHz HQ audio encoder.
3.0.22 2022/05/26
• Fixed an issue where an audio buffer overrun could occur when using encryption, which could result in a crash.
3.0.21 2022/02/14
• Fixed a distortion issue when using low latency mode and built-in microphone and speakers.
3.0.20 2021/12/14
• Added support for Unity Cloud channel abbreviations.
3.0.19 2021/11/18
• Fixed bug that could cause an application crash on certain Mac OS versions.
• Adds AES256-GCM encryption for Unity Protect.
• Prevents accidental selection of Listen function if the server is restricting the user to Talk-Only.
3.0.18 2021/09/27
• Adds AES256-GCM encryption for Unity Protect.
• Prevents accidental selection of Listen function if the server is restricting the user to Talk-Only.
3.0.17 2021/09/22
• Increased StreamDeck 'press and hold' logic from 140ms to 250ms. Solves an issue where older Mac computers would never detect a short-press from a StreamDeck key panel.
• Added 'Add Channel to VOX' mode. This allows you to long-press a talk channel while in VOX mode, and it will add the channel to the current broadcast channels instead of performing a channel solo. Long-pressing channels that are currently involved in the current VOX session will still perform a solo channel talk. This new mode only applies to channels that aren't selected for VOX mode.
3.0.16 2021/07/29
• Added 'Add Channel to VOX' mode. This allows you to long-press a talk channel while in VOX mode, and it will add the channel to the current broadcast channels instead of performing a channel solo. Long-pressing channels that are currently involved in the current VOX session will still perform a solo channel talk. This new mode only applies to channels that aren't selected for VOX mode.
3.0.15 2021/07/28
• Added remote StreamDeck panel setup in the key-panel configuration page. This allows StreamDeck panels that trigger Unity Client to be attached to computers other than the one running the Unity Client application.
3.0.14 2021/06/23
• Redesigned main GUI, which allows variable resizing by simply dragging the main window.
• Fixed problem with X-Keys panels on OS X Big Sur.
• Separated the channel description window from the main console.
• Runs in dark mode regardless of the OS X appearance preference. Dark mode is simulated on pre-Mojave OS X versions.
3.0.13 2021/06/17
• Fixed problem where channel labels were blank for Unity Cloud users.
3.0.12 2021/04/20
• Added support for the Apple M1 processor
• Solo talk no longer auto-activates the corresponding receive channel, effectively making solo talk a talk-only momentary press channel
• Added a recent login function, which makes switching between various servers quick and easy
• Added last talker function to quickly see who the last person who talked is
• Added reply function to the last private talker. Just press in the last talker area, or from an attached keypanel
• Added option to show seconds and 24hr format in the time display
• Added option to select time zone for time display (can be different than the phone time zone)
• Fixed X-Keys panel issue with Mojave and later operating systems
• Fixed crash that would occur if exclusive mode was checked for the output audio device
• Various UI changes
• Fixes bug where screen expands when 'last talkers' exceeds the initial window size
3.0.11 2021/03/31
• Solo talk no longer auto-activates the corresponding receive channel, effectively making solo talk a talk-only momentary press channel.
• Added a recent login function, which makes switching between various servers quick and easy.
• Added last talker function to quickly see who the last person who talked is.
• Added reply function to the last private talker. Just press in the last talker area, or from an attached keypanel.
• Added option to show seconds and 24hr format in the time display.
• Added option to select time zone for time display (can be different than the phone time zone).
• Fixed X-Keys panel issue with Mojave and later operating systems.
• Fixed crash that would occur if exclusive mode was checked for the output audio device
• Various UI changes
3.0.10 2021/03/30
• Fixed a bug where cloud logins with the 'continuous login' feature enabled would lock up in an infinite loop if the cloud account has been removed, modified or otherwise made invalid.
3.0.9 2020/07/13
• Added support for Bluetooth headsets and speakers.
3.0.8 2020/05/13
• Added support for StreamDeck Plus XL
• Fixed some text alignment issues on the keypanel setup page
• Added error messages for audio devices that won't work properly with echo cancel turned on
さらに見る バージョン3.0.32 3月24日
データの収集なし デベロッパはこのアプリからデータを収集しません。
