* Added a 'Project storage folder' option to the BETA settings where you can change the storage folder for projects to a USB drive for example. * Added an option 'Input velocity' to the MIDI input dialog which opens a dialog where you can set the input velocity curve. This can be stored either per MIDI device or per track. The 'Output velocity range' option has been removed and if it was set, it is now mapped to the input velocity curve. * Many changes to MIDI remote setup: - Added Latched/unlatched and MIDI channel columns to support a wider variety of MIDI controllers with different button behaviors. - Because of that, 'Play triggers at 127 only' and 'Arm toggles' have been removed since they can be controlled by turning Latched on or off. - 'First available input' is now changed to 'All'. * When loading a project with two similar USB MIDI keyboards attached, the app should now assign the correct input to the tracks, given the project was saved with this version. * Solved an issue with AUv3's not recording MIDI channel pressure, like the GeoShred Tenor Sax. * Ported the 'Load Project' and 'Instrument selection' dialogs to JUCE. * Solved issues with default note velocity in the drum pattern editor. * Mix-down to M4A format with a sample rate of 48000Hz was not possible anymore. Solved. * Solved bugs in and improved the Compressor.

* Added an option 'By BPM' to the time stretch dialog where you can enter a source and target BPM. * Added an option 'Ignore MIDI volume (CC 07)' to the MIDI input dialog. * Added an option 'Ignore pitch bend' to the MIDI input dialog. This can help with faulty MIDI keyboards that erroneously send pitch bend messages. * Added an option 'Solo exclusive mode' to the Mixer channel settings. * Solved a possible crash when loading a project with AudioBus active. * The setting 'Ignore other MIDI CC's was not saved. Solved. * The time stretch button in the piano roll editor did not work anymore. Solved. * Available memory display in the instrument selection dialog now gets updated every second which is more reliable since Soundfonts are loaded in the background. * Wheels on/off state in the virtual keyboard is now remembered.

* Long-pressing a Soundfont in the instrument selection dialog now opens a menu where you can choose to delete the Soundfont. * Added a search field to the automation parameter selection and MIDI CC selection dialogs. * Calculation of the pre-computed graphics file for audio clips now happens in the background. For long audio clips, this could mean that the waveform is not displayed directly after importing or recording and that 'Loading...' is displayed in the clip. * Loading a project name with international characters didn't work. Solved. * Values are now displayed underneath the graphic EQ sliders for iPads.

* Note offs are now sent to an AU MIDI after stopping playback. Before, starting playback could still have a hanging note that was processed. * Added 'Render to a MIDI file' to the track pop-up of instrument and MIDI tracks so you can save individual tracks to a MIDI file. * Solved a possible crash that could occur when disconnecting or connecting a USB audio device. * Audio tracks are now unarmed when attaching/detaching an audio device.

* Added search fields to the instrument selection and effect selection dialogs. * Parameters with automation points are now displayed on top in the parameter selection menu. * Added an option 'Show MIDI channel button in piano roll' to the MIDI settings. This can be helpful with Audio Units like the (upcoming) Battallion drum machine. * The FX Send block now displays the target bus name as subscript. * Opening the MIDI remote control for effect parameters twice could result in the MIDI learn not working anymore. Solved. * When swapping effects with a side chain, the side chain wasn't swapped as well. Solved. * A connection from the IN block to the second row was not set when loading a FX grid. Solved. * User-defined drum kits were not displayed in the multi-instrument selection section. Solved.

* Added an option 'Track selection' to the 'Export to other DAW' dialog. * Solved an issue where MIDI notes could be drawn outside of the clip. * Selecting a subdirectory in the instrument selection dialog could cause a crash. Solved. * Solved a crash after arming a pure MIDI track when the input was set to 'Virtual keyboard'. * Scan for BT MIDI devices didn't work anymore. Solved. * Solved a freeze when loading a project with a freezed track with more than 2 Fx Sends.

* Added a 'Trim end' option to the 'Auto split' dialog. * Added a Mute/Unmute option to the clip pop-up menu (except for clips on pure MIDI tracks). * 'Auto split' was not calculated correctly for stereo clips. Solved. * Clip volume and fades did not work for a multi-drum pattern track. Solved. * Markers could be placed incorrectly when tempo changes were present. Solved.

* Many actions can now be done during playback, most of them without a pause, some with a short pause. * Changed the colors of the piano roll and drum pattern editor into a dark mode. * Added a 'Multi-instrument' option when creating a drum pattern track: in this mode, you can assign an audio file or a sound from a Soundfont to a drum 'lane'. This makes it possible to use your own sounds in the drum pattern editor. Each drum lane now also features its own audio processing chain, meaning that it has its own effects grid, volume, panning, ADSR, pitch shift and basic reverb controls. You can use the iOS drap & drop mechanism to import drum sounds as well (max. file size 4MB). * A free drum sound pack consisting of 80 high quality drum samples for use with the multi-instrument drum pattern editor can be downloaded. It features a wide range of kicks, snares, hihats, toms, etc. sorted by different genres: 80's Retrowave, Acoustic, EDM, Foley, Hip Hop, Industrial and Reggaeton. * Optional in-app purchase to extend the free drum sound pack with 420 more high quality drum samples. * Added multi-output support for AUv3 instruments. Additional outputs can be sent to mix busses. * New Settings screen to match the app's style. * Multiple mixer controls can now be adjusted simultaneously. * Added an 'Import Soundfont' option to the instrument selection dialog (although Soundfonts can always be copied directly using the Files app to the AudioEvolution/SoundFonts folder). * Added a 'Share' option to the file pop-up menu in the file browser. * Added an option 'Draw grid on top of clips' which now defaults to 'off'. * Changes to tempo markers can now be undo/redone. * The audio input dialog now makes it possible to select between different inputs of the device itself, so you can for example select the iPad microphone even if a headset is connected. * The state of the AU button in the instrument display is now remembered and stored with the project. * When editing notes outside the current clip area, the clip will now be automatically expanded. * Added a Quantize option to the pop-up menu of selected notes in the piano roll editor. * Added a 'Select all' button to the piano roll editor in Edit mode. * The mixer can now be scrolled when dragging in the volume slider area. * The available memory is now displayed in the instrument selection dialog. The app will now refuse to load Soundfonts when the available memory is lower than 250MB to prevent out-of-memory crashes. * Added an 'Auto split' option to the audio clip pop-up menu. * Added an option 'MIDI loop recording'. * Added an option to test the new plug-in delay compensation that works for both audio and instrument tracks (non-armed) to the BETA section of the new settings dialog. * The size of the AU MIDI view is now remembered and stored in the project (half/full size) and the option 'Open AU in full screen' has been removed from the Settings. * Portuguese translation * Solved a crash that could occur when MIDI was received while adding or removing a track. * Replacing an effect with the display active of the target effect block could cause a crash. Solved. * A split point could be erroneously added when moving your finger beyond the display edge. Solved. * Long-tapping a position on the arranger screen and selecting Paste could paste at the wrong location. Solved. * MIDI parameter control settings for Evolution One were not set when loading a project. Solved. * Solved a timing issue for MIDI events being recorded from a AU MIDI processor. * Marquee selection in the piano roll did not handle scrolling correctly. Solved. * Selected events in the piano roll could be moved to a negative offset. Solved. * When a MIDI device transmitted Active Sensing events, this could lead to other MIDI events not being parsed correctly, which could result in hanging notes etc. and more..

* Many actions can now be done during playback, most of them without a pause, some with a short pause. * Changed the colors of the piano roll and drum pattern editor into a dark mode. * Added a 'Multi-instrument' option when creating a drum pattern track: in this mode, you can assign an audio file or a sound from a Soundfont to a drum 'lane'. This makes it possible to use your own sounds in the drum pattern editor. Each drum lane now also features its own audio processing chain, meaning that it has its own effects grid, volume, panning, ADSR, pitch shift and basic reverb controls. You can use the iOS drap & drop mechanism to import drum sounds as well (max. file size 4MB). * A free drum sound pack consisting of 80 high quality drum samples for use with the multi-instrument drum pattern editor can be downloaded. It features a wide range of kicks, snares, hihats, toms, etc. sorted by different genres: 80's Retrowave, Acoustic, EDM, Foley, Hip Hop, Industrial and Reggaeton. * Optional in-app purchase to extend the free drum sound pack with 420 more high quality drum samples. * Added multi-output support for AUv3 instruments. Additional outputs can be sent to mix busses. * New Settings screen to match the app's style. * Multiple mixer controls can now be adjusted simultaneously. * Added an 'Import Soundfont' option to the instrument selection dialog (although Soundfonts can always be copied directly using the Files app to the AudioEvolution/SoundFonts folder). * Added a 'Share' option to the file pop-up menu in the file browser. * Added an option 'Draw grid on top of clips' which now defaults to 'off'. * Changes to tempo markers can now be undo/redone. * The audio input dialog now makes it possible to select between different inputs of the device itself, so you can for example select the iPad microphone even if a headset is connected. * The state of the AU button in the instrument display is now remembered and stored with the project. * When editing notes outside the current clip area, the clip will now be automatically expanded. * Added a Quantize option to the pop-up menu of selected notes in the piano roll editor. * Added a 'Select all' button to the piano roll editor in Edit mode. * The mixer can now be scrolled when dragging in the volume slider area. * The available memory is now displayed in the instrument selection dialog. The app will now refuse to load Soundfonts when the available memory is lower than 250MB to prevent out-of-memory crashes. * Added an 'Auto split' option to the audio clip pop-up menu. * Added an option 'MIDI loop recording'. * Added an option to test the new plug-in delay compensation that works for both audio and instrument tracks (non-armed) to the BETA section of the new settings dialog. * The size of the AU MIDI view is now remembered and stored in the project (half/full size) and the option 'Open AU in full screen' has been removed from the Settings. * Portuguese translation * Solved a crash that could occur when MIDI was received while adding or removing a track. * Replacing an effect with the display active of the target effect block could cause a crash. Solved. * A split point could be erroneously added when moving your finger beyond the display edge. Solved. * Long-tapping a position on the arranger screen and selecting Paste could paste at the wrong location. Solved. * MIDI parameter control settings for Evolution One were not set when loading a project. Solved. * Solved a timing issue for MIDI events being recorded from a AU MIDI processor. * Marquee selection in the piano roll did not handle scrolling correctly. Solved. * Selected events in the piano roll could be moved to a negative offset. Solved. * When a MIDI device transmitted Active Sensing events, this could lead to other MIDI events not being parsed correctly, which could result in hanging notes etc. and more..

* Many actions can now be done during playback, most of them without a pause, some with a short pause. * Changed the colors of the piano roll and drum pattern editor into a dark mode. * Added a 'Multi-instrument' option when creating a drum pattern track: in this mode, you can assign an audio file or a sound from a Soundfont to a drum 'lane'. This makes it possible to use your own sounds in the drum pattern editor. Each drum lane now also features its own audio processing chain, meaning that it has its own effects grid, volume, panning, ADSR, pitch shift and basic reverb controls. You can use the iOS drap & drop mechanism to import drum sounds as well (max. file size 4MB). * A free drum sound pack consisting of 80 high quality drum samples for use with the multi-instrument drum pattern editor can be downloaded. It features a wide range of kicks, snares, hihats, toms, etc. sorted by different genres: 80's Retrowave, Acoustic, EDM, Foley, Hip Hop, Industrial and Reggaeton. * Optional in-app purchase to extend the free drum sound pack with 420 more high quality drum samples. * Added multi-output support for AUv3 instruments. Additional outputs can be sent to mix busses. * New Settings screen to match the app's style. * Multiple mixer controls can now be adjusted simultaneously. * Added an 'Import Soundfont' option to the instrument selection dialog (although Soundfonts can always be copied directly using the Files app to the AudioEvolution/SoundFonts folder). * Added a 'Share' option to the file pop-up menu in the file browser. * Added an option 'Draw grid on top of clips' which now defaults to 'off'. * Changes to tempo markers can now be undo/redone. * The audio input dialog now makes it possible to select between different inputs of the device itself, so you can for example select the iPad microphone even if a headset is connected. * The state of the AU button in the instrument display is now remembered and stored with the project. * When editing notes outside the current clip area, the clip will now be automatically expanded. * Added a Quantize option to the pop-up menu of selected notes in the piano roll editor. * Added a 'Select all' button to the piano roll editor in Edit mode. * The mixer can now be scrolled when dragging in the volume slider area. * The available memory is now displayed in the instrument selection dialog. The app will now refuse to load Soundfonts when the available memory is lower than 250MB to prevent out-of-memory crashes. * Added an 'Auto split' option to the audio clip pop-up menu. * Added an option 'MIDI loop recording'. * Added an option to test the new plug-in delay compensation that works for both audio and instrument tracks (non-armed) to the BETA section of the new settings dialog. * The size of the AU MIDI view is now remembered and stored in the project (half/full size) and the option 'Open AU in full screen' has been removed from the Settings. * Portuguese translation * Solved a crash that could occur when MIDI was received while adding or removing a track. * Replacing an effect with the display active of the target effect block could cause a crash. Solved. * A split point could be erroneously added when moving your finger beyond the display edge. Solved. * Long-tapping a position on the arranger screen and selecting Paste could paste at the wrong location. Solved. * MIDI parameter control settings for Evolution One were not set when loading a project. Solved. * Solved a timing issue for MIDI events being recorded from a AU MIDI processor. * Marquee selection in the piano roll did not handle scrolling correctly. Solved. * Selected events in the piano roll could be moved to a negative offset. Solved. * When a MIDI device transmitted Active Sensing events, this could lead to other MIDI events not being parsed correctly, which could result in hanging notes etc. and more..

* Many actions can now be done during playback, most of them without a pause, some with a short pause. * Changed the colors of the piano roll and drum pattern editor into a dark mode. * Added a 'Multi-instrument' option when creating a drum pattern track: in this mode, you can assign an audio file or a sound from a Soundfont to a drum 'lane'. This makes it possible to use your own sounds in the drum pattern editor. Each drum lane now also features its own audio processing chain, meaning that it has its own effects grid, volume, panning, ADSR, pitch shift and basic reverb controls. You can use the iOS drap & drop mechanism to import drum sounds as well (max. file size 4MB). * A free drum sound pack consisting of 80 high quality drum samples for use with the multi-instrument drum pattern editor can be downloaded. It features a wide range of kicks, snares, hihats, toms, etc. sorted by different genres: 80's Retrowave, Acoustic, EDM, Foley, Hip Hop, Industrial and Reggaeton. * Optional in-app purchase to extend the free drum sound pack with 420 more high quality drum samples. * Added multi-output support for AUv3 instruments. Additional outputs can be sent to mix busses. * New Settings screen to match the app's style. * Multiple mixer controls can now be adjusted simultaneously. * Added an 'Import Soundfont' option to the instrument selection dialog (although Soundfonts can always be copied directly using the Files app to the AudioEvolution/SoundFonts folder). * Added a 'Share' option to the file pop-up menu in the file browser. * Added an option 'Draw grid on top of clips' which now defaults to 'off'. * Changes to tempo markers can now be undo/redone. * The audio input dialog now makes it possible to select between different inputs of the device itself, so you can for example select the iPad microphone even if a headset is connected. * The state of the AU button in the instrument display is now remembered and stored with the project. * When editing notes outside the current clip area, the clip will now be automatically expanded. * Added a Quantize option to the pop-up menu of selected notes in the piano roll editor. * Added a 'Select all' button to the piano roll editor in Edit mode. * The mixer can now be scrolled when dragging in the volume slider area. * The available memory is now displayed in the instrument selection dialog. The app will now refuse to load Soundfonts when the available memory is lower than 250MB to prevent out-of-memory crashes. * Added an 'Auto split' option to the audio clip pop-up menu. * Added an option 'MIDI loop recording'. * Added an option to test the new plug-in delay compensation that works for both audio and instrument tracks (non-armed) to the BETA section of the new settings dialog. * The size of the AU MIDI view is now remembered and stored in the project (half/full size) and the option 'Open AU in full screen' has been removed from the Settings. * Portuguese translation * Solved a crash that could occur when MIDI was received while adding or removing a track. * Replacing an effect with the display active of the target effect block could cause a crash. Solved. * A split point could be erroneously added when moving your finger beyond the display edge. Solved. * Long-tapping a position on the arranger screen and selecting Paste could paste at the wrong location. Solved. * MIDI parameter control settings for Evolution One were not set when loading a project. Solved. * Solved a timing issue for MIDI events being recorded from a AU MIDI processor. * Marquee selection in the piano roll did not handle scrolling correctly. Solved. * Selected events in the piano roll could be moved to a negative offset. Solved. * When a MIDI device transmitted Active Sensing events, this could lead to other MIDI events not being parsed correctly, which could result in hanging notes etc. and more..

* Many actions can now be done during playback, most of them without a pause, some with a short pause. * Changed the colors of the piano roll and drum pattern editor into a dark mode. * Added a 'Multi-instrument' option when creating a drum pattern track: in this mode, you can assign an audio file or a sound from a Soundfont to a drum 'lane'. This makes it possible to use your own sounds in the drum pattern editor. Each drum lane now also features its own audio processing chain, meaning that it has its own effects grid, volume, panning, ADSR, pitch shift and basic reverb controls. You can use the iOS drap & drop mechanism to import drum sounds as well (max. file size 4MB). * A free drum sound pack consisting of 80 high quality drum samples for use with the multi-instrument drum pattern editor can be downloaded. It features a wide range of kicks, snares, hihats, toms, etc. sorted by different genres: 80's Retrowave, Acoustic, EDM, Foley, Hip Hop, Industrial and Reggaeton. * Optional in-app purchase to extend the free drum sound pack with 420 more high quality drum samples. * Added multi-output support for AUv3 instruments. Additional outputs can be sent to mix busses. * New Settings screen to match the app's style. * Multiple mixer controls can now be adjusted simultaneously. * Added an 'Import Soundfont' option to the instrument selection dialog (although Soundfonts can always be copied directly using the Files app to the AudioEvolution/SoundFonts folder). * Added a 'Share' option to the file pop-up menu in the file browser. * Added an option 'Draw grid on top of clips' which now defaults to 'off'. * Changes to tempo markers can now be undo/redone. * The audio input dialog now makes it possible to select between different inputs of the device itself, so you can for example select the iPad microphone even if a headset is connected. * The state of the AU button in the instrument display is now remembered and stored with the project. * When editing notes outside the current clip area, the clip will now be automatically expanded. * Added a Quantize option to the pop-up menu of selected notes in the piano roll editor. * Added a 'Select all' button to the piano roll editor in Edit mode. * The mixer can now be scrolled when dragging in the volume slider area. * The available memory is now displayed in the instrument selection dialog. The app will now refuse to load Soundfonts when the available memory is lower than 250MB to prevent out-of-memory crashes. * Added an 'Auto split' option to the audio clip pop-up menu. * Added an option 'MIDI loop recording'. * Added an option to test the new plug-in delay compensation that works for both audio and instrument tracks (non-armed) to the BETA section of the new settings dialog. * The size of the AU MIDI view is now remembered and stored in the project (half/full size) and the option 'Open AU in full screen' has been removed from the Settings. * Portuguese translation * Solved a crash that could occur when MIDI was received while adding or removing a track. * Replacing an effect with the display active of the target effect block could cause a crash. Solved. * A split point could be erroneously added when moving your finger beyond the display edge. Solved. * Long-tapping a position on the arranger screen and selecting Paste could paste at the wrong location. Solved. * MIDI parameter control settings for Evolution One were not set when loading a project. Solved.\n" * Solved a timing issue for MIDI events being recorded from a AU MIDI processor. * Marquee selection in the piano roll did not handle scrolling correctly. Solved. * Selected events in the piano roll could be moved to a negative offset. Solved. * Pasting a MIDI clip with multiple MIDI channels would reset all the MIDI channels to one and the same channel. Solved. * When a MIDI device transmitted Active Sensing events, this could lead to other MIDI events not being parsed correctly, which could result in hanging notes etc. and more..

* Many actions can now be done during playback, most of them without a pause, some with a short pause. * Changed the colors of the piano roll and drum pattern editor into a dark mode. * Added a 'Multi-instrument' option when creating a drum pattern track: in this mode, you can assign an audio file or a sound from a Soundfont to a drum 'lane'. This makes it possible to use your own sounds in the drum pattern editor. Each drum lane now also features its own audio processing chain, meaning that it has its own effects grid, volume, panning, ADSR, pitch shift and basic reverb controls. You can use the iOS drap & drop mechanism to import drum sounds as well (max. file size 4MB). * A free drum sound pack consisting of 80 high quality drum samples for use with the multi-instrument drum pattern editor can be downloaded. It features a wide range of kicks, snares, hihats, toms, etc. sorted by different genres: 80's Retrowave, Acoustic, EDM, Foley, Hip Hop, Industrial and Reggaeton. * Optional in-app purchase to extend the free drum sound pack with 420 more high quality drum samples. * Added multi-output support for AUv3 instruments. Additional outputs can be sent to mix busses. * New Settings screen to match the app's style. * Multiple mixer controls can now be adjusted simultaneously. * Added an 'Import Soundfont' option to the instrument selection dialog (although Soundfonts can always be copied directly using the Files app to the AudioEvolution/SoundFonts folder). * Added a 'Share' option to the file pop-up menu in the file browser. * Added an option 'Draw grid on top of clips' which now defaults to 'off'. * Changes to tempo markers can now be undo/redone. * The audio input dialog now makes it possible to select between different inputs of the device itself, so you can for example select the iPad microphone even if a headset is connected. * The state of the AU button in the instrument display is now remembered and stored with the project. * When editing notes outside the current clip area, the clip will now be automatically expanded. * Added a Quantize option to the pop-up menu of selected notes in the piano roll editor. * Added a 'Select all' button to the piano roll editor in Edit mode. * The mixer can now be scrolled when dragging in the volume slider area. * The available memory is now displayed in the instrument selection dialog. The app will now refuse to load Soundfonts when the available memory is lower than 250MB to prevent out-of-memory crashes. * Added an 'Auto split' option to the audio clip pop-up menu. * Added an option 'MIDI loop recording'. * Added an option to test the new plug-in delay compensation that works for both audio and instrument tracks (non-armed) to the BETA section of the new settings dialog. * The size of the AU MIDI view is now remembered and stored in the project (half/full size) and the option 'Open AU in full screen' has been removed from the Settings. * Portuguese translation * Solved a crash that could occur when MIDI was received while adding or removing a track. * Replacing an effect with the display active of the target effect block could cause a crash. Solved. * A split point could be erroneously added when moving your finger beyond the display edge. Solved. * Long-tapping a position on the arranger screen and selecting Paste could paste at the wrong location. Solved. * MIDI parameter control settings for Evolution One were not set when loading a project. Solved.\n" * Solved a timing issue for MIDI events being recorded from a AU MIDI processor. * Marquee selection in the piano roll did not handle scrolling correctly. Solved. * Selected events in the piano roll could be moved to a negative offset. Solved. * Pasting a MIDI clip with multiple MIDI channels would reset all the MIDI channels to one and the same channel. Solved. * AudioShare stopped working in iOS18. Solved. and more..

* Many actions can now be done during playback, most of them without a pause, some with a short pause. * Changed the colors of the piano roll and drum pattern editor into a dark mode. * Added a 'Multi-instrument' option when creating a drum pattern track: in this mode, you can assign an audio file or a sound from a Soundfont to a drum 'lane'. This makes it possible to use your own sounds in the drum pattern editor. Each drum lane now also features its own audio processing chain, meaning that it has its own effects grid, volume, panning, ADSR, pitch shift and basic reverb controls. You can use the iOS drap & drop mechanism to import drum sounds as well (max. file size 4MB). * A free drum sound pack consisting of 80 high quality drum samples for use with the multi-instrument drum pattern editor can be downloaded. It features a wide range of kicks, snares, hihats, toms, etc. sorted by different genres: 80's Retrowave, Acoustic, EDM, Foley, Hip Hop, Industrial and Reggaeton. * Optional in-app purchase to extend the free drum sound pack with 420 more high quality drum samples. * Added multi-output support for AUv3 instruments. Additional outputs can be sent to mix busses. * New Settings screen to match the app's style. * Multiple mixer controls can now be adjusted simultaneously. * Added an 'Import Soundfont' option to the instrument selection dialog (although Soundfonts can always be copied directly using the Files app to the AudioEvolution/SoundFonts folder). * Added a 'Share' option to the file pop-up menu in the file browser. * Added an option 'Draw grid on top of clips' which now defaults to 'off'. * Changes to tempo markers can now be undo/redone. * The audio input dialog now makes it possible to select between different inputs of the device itself, so you can for example select the iPad microphone even if a headset is connected. * The state of the AU button in the instrument display is now remembered and stored with the project. * When editing notes outside the current clip area, the clip will now be automatically expanded. * Added a Quantize option to the pop-up menu of selected notes in the piano roll editor. * Added a 'Select all' button to the piano roll editor in Edit mode. * The mixer can now be scrolled when dragging in the volume slider area. * The available memory is now displayed in the instrument selection dialog. The app will now refuse to load Soundfonts when the available memory is lower than 250MB to prevent out-of-memory crashes. * Added an 'Auto split' option to the audio clip pop-up menu. * Added an option 'MIDI loop recording'. * Added an option to test the new plug-in delay compensation that works for both audio and instrument tracks (non-armed) to the BETA section of the new settings dialog. * The size of the AU MIDI view is now remembered and stored in the project (half/full size) and the option 'Open AU in full screen' has been removed from the Settings. * Portuguese translation * Solved a crash that could occur when MIDI was received while adding or removing a track. * Replacing an effect with the display active of the target effect block could cause a crash. Solved. * A split point could be erroneously added when moving your finger beyond the display edge. Solved. * Long-tapping a position on the arranger screen and selecting Paste could paste at the wrong location. Solved. * MIDI parameter control settings for Evolution One were not set when loading a project. Solved.\n" * Solved a timing issue for MIDI events being recorded from a AU MIDI processor. * Marquee selection in the piano roll did not handle scrolling correctly. Solved. * Selected events in the piano roll could be moved to a negative offset. Solved. * Pasting a MIDI clip with multiple MIDI channels would reset all the MIDI channels to one and the same channel. Solved. * AudioShare stopped working in iOS18. Solved. and more..

* Many actions can now be done during playback, most of them without a pause, some with a short pause. * Changed the colors of the piano roll and drum pattern editor into a dark mode. * Added a 'Multi-instrument' option when creating a drum pattern track: in this mode, you can assign an audio file or a sound from a Soundfont to a drum 'lane'. This makes it possible to use your own sounds in the drum pattern editor. Each drum lane now also features its own audio processing chain, meaning that it has its own effects grid, volume, panning, ADSR, pitch shift and basic reverb controls. You can use the iOS drap & drop mechanism to import drum sounds as well (max. file size 4MB). * A free drum sound pack consisting of 80 high quality drum samples for use with the multi-instrument drum pattern editor can be downloaded. It features a wide range of kicks, snares, hihats, toms, etc. sorted by different genres: 80's Retrowave, Acoustic, EDM, Foley, Hip Hop, Industrial and Reggaeton. * Optional in-app purchase to extend the free drum sound pack with 420 more high quality drum samples. * Added multi-output support for AUv3 instruments. Additional outputs can be sent to mix busses. * New Settings screen to match the app's style. * Multiple mixer controls can now be adjusted simultaneously. * Added an 'Import Soundfont' option to the instrument selection dialog (although Soundfonts can always be copied directly using the Files app to the AudioEvolution/SoundFonts folder). * Added a 'Share' option to the file pop-up menu in the file browser. * Added an option 'Draw grid on top of clips' which now defaults to 'off'. * Changes to tempo markers can now be undo/redone. * The audio input dialog now makes it possible to select between different inputs of the device itself, so you can for example select the iPad microphone even if a headset is connected. * The state of the AU button in the instrument display is now remembered and stored with the project. * When editing notes outside the current clip area, the clip will now be automatically expanded. * Added a Quantize option to the pop-up menu of selected notes in the piano roll editor. * Added a 'Select all' button to the piano roll editor in Edit mode. * The mixer can now be scrolled when dragging in the volume slider area. * The available memory is now displayed in the instrument selection dialog. The app will now refuse to load Soundfonts when the available memory is lower than 250MB to prevent out-of-memory crashes. * Added an 'Auto split' option to the audio clip pop-up menu. * Added an option 'MIDI loop recording'. * Added an option to test the new plug-in delay compensation that works for both audio and instrument tracks (non-armed) to the BETA section of the new settings dialog. * The size of the AU MIDI view is now remembered and stored in the project (half/full size) and the option 'Open AU in full screen' has been removed from the Settings. * Portuguese translation * Solved a crash that could occur when MIDI was received while adding or removing a track. * Replacing an effect with the display active of the target effect block could cause a crash. Solved. * A split point could be erroneously added when moving your finger beyond the display edge. Solved. * Long-tapping a position on the arranger screen and selecting Paste could paste at the wrong location. Solved. * MIDI parameter control settings for Evolution One were not set when loading a project. Solved.\n" * Solved a timing issue for MIDI events being recorded from a AU MIDI processor. * Marquee selection in the piano roll did not handle scrolling correctly. Solved. * Selected events in the piano roll could be moved to a negative offset. Solved. * Pasting a MIDI clip with multiple MIDI channels would reset all the MIDI channels to one and the same channel. Solved. * AudioShare stopped working in iOS18. Solved. and more..

* Many actions can now be done during playback, most of them without a pause, some with a short pause. * Changed the colors of the piano roll and drum pattern editor into a dark mode. * Added a 'Multi-instrument' option when creating a drum pattern track: in this mode, you can assign an audio file or a sound from a Soundfont to a drum 'lane'. This makes it possible to use your own sounds in the drum pattern editor. Each drum lane now also features its own audio processing chain, meaning that it has its own effects grid, volume, panning, ADSR, pitch shift and basic reverb controls. You can use the iOS drap & drop mechanism to import drum sounds as well (max. file size 4MB). * A free drum sound pack consisting of 80 high quality drum samples for use with the multi-instrument drum pattern editor can be downloaded. It features a wide range of kicks, snares, hihats, toms, etc. sorted by different genres: 80's Retrowave, Acoustic, EDM, Foley, Hip Hop, Industrial and Reggaeton. * Optional in-app purchase to extend the free drum sound pack with 420 more high quality drum samples. * Added multi-output support for AUv3 instruments. Additional outputs can be sent to mix busses. * New Settings screen to match the app's style. * Multiple mixer controls can now be adjusted simultaneously. * Added an 'Import Soundfont' option to the instrument selection dialog (although Soundfonts can always be copied directly using the Files app to the AudioEvolution/SoundFonts folder). * Added a 'Share' option to the file pop-up menu in the file browser. * Added an option 'Draw grid on top of clips' which now defaults to 'off'. * Changes to tempo markers can now be undo/redone. * The audio input dialog now makes it possible to select between different inputs of the device itself, so you can for example select the iPad microphone even if a headset is connected. * The state of the AU button in the instrument display is now remembered and stored with the project. * When editing notes outside the current clip area, the clip will now be automatically expanded. * Added a Quantize option to the pop-up menu of selected notes in the piano roll editor. * Added a 'Select all' button to the piano roll editor in Edit mode. * The mixer can now be scrolled when dragging in the volume slider area. * The available memory is now displayed in the instrument selection dialog. The app will now refuse to load Soundfonts when the available memory is lower than 250MB to prevent out-of-memory crashes. * Added an 'Auto split' option to the audio clip pop-up menu. * Added an option 'MIDI loop recording'. * Added an option to test the new plug-in delay compensation that works for both audio and instrument tracks (non-armed) to the BETA section of the new settings dialog. * The size of the AU MIDI view is now remembered and stored in the project (half/full size) and the option 'Open AU in full screen' has been removed from the Settings. * Solved a crash that could occur when MIDI was received while adding or removing a track. * Replacing an effect with the display active of the target effect block could cause a crash. Solved. * A split point could be erroneously added when moving your finger beyond the display edge. Solved. * Long-tapping a position on the arranger screen and selecting Paste could paste at the wrong location. Solved. * MIDI parameter control settings for Evolution One were not set when loading a project. Solved.\n" * Solved a timing issue for MIDI events being recorded from a AU MIDI processor. * Marquee selection in the piano roll did not handle scrolling correctly. Solved. * Selected events in the piano roll could be moved to a negative offset. Solved. * Pasting a MIDI clip with multiple MIDI channels would reset all the MIDI channels to one and the same channel. Solved. * AudioShare stopped working in iOS18. Solved. and more..

* 6.5.1: Solved an issue with 6.5.0 where the app could crash when 'Send MIDI clock sync' was active. * 6.5.0: Possible work-around for a recent iOS bug where the purchase receipt was lost.

Possible work-around for a recent iOS bug where the purchase receipt was lost.

Solved a crash introduced accidentally in v5.9.9 when pressing the MIDI button for an effect.

* FX grids can now be stored and loaded through the Presets menu. * An AUv3 instrument that produces MIDI would always record its MIDI on the track, even without being armed. Solved. * The Tempo marker dialog now takes on the time signature and tempo values of the tempo marker directly before the new one being added. * When opening the MIDI parameter control dialog in Evolution One, Flowtones or Lowtone, the last used parameter is highlighted. * When the ‘Select’ button is active, double-tapping now does not open VTS or enter the piano roll anymore. * Vertical scrolling on the arranger screen is now restricted such that the last track always remains visible. * Cut/Copy/Paste buttons are now available in Select mode as well.

The transpose option wasn't correctly stored in the project. Solved.

Solved an issue with undo-ing added note events in the piano roll.

* Clips can now be removed during playback (with a small pause). * Attempting to split an audio clip at its start (for example due to the grid setting) could cause an error message that the length of the audio clip was negative or zero. Solved. * Solved a crash that could occur when MIDI input was received during loading of a project. * A center pitch bend event is now sent at the start of playback for tracks using a SoundFont.

* Clips can now be removed during playback (with a small pause). * Attempting to split an audio clip at its start (for example due to the grid setting) could cause an error message that the length of the audio clip was negative or zero. Solved. * Solved a crash that could occur when MIDI input was received during loading of a project. * A center pitch bend event is now sent at the start of playback for tracks using a SoundFont.

* Added the Toneboosters Lowtone synth (in-app purchase required). TB Lowtone is an innovative bass synthesizer plug-in featuring three voltage-controlled oscillators with a large variety of waveform algorithms, continuous pulse-width modulation (PWM), Frequency Modulation (FM) and oscillator hard sync, complemented by a voltage-controlled noise synthesizer, parameter modulation a re-designed non-linear voltage controlled filter. TB Lowtone is the world's first bass synthesizer featuring loudness-domain harmonic synthesis, creating deeper, more consistent and production-ready bass sounds compared to conventional synthesizers operating in the (linear) amplitude domain. * Added 'Output velocity range' to the MIDI input dialog. * Replaced the I (I/O meter) at the bottom right with a Master volume indicator (M). * Removed the 'Show CPU usage' option (it will now always be displayed). * Added a setting 'Preview soundfont' which can be turned off if you don't want to hear a sound when selecting a Soundfont preset. * 'Set visually' in the Time Stretch dialog did not work in the 'Beginner' user interface mode. Solved. * Mixdown could crash when multi-core processing was turned on. Solved. * Using a (pure) MIDI track would crash on MIDI input. Solved. * Applying touch automation for AUv3's with loop playback did not add the automation points at the correct time. Solved. * Mixing down with resampling always resulted in a 32-bit floating point WAV file. Solved. * Added an option 'Ignore MIDI CC11 for SoundFonts' to the USB MIDI settings so you can use an expression pedal for other purposes.