4:20 is an SMPTE LTC timecode reader and generator for iPhone and iPad. It reads timecode from a wired audio input and shows lock, frame rate, drop frame, measured rate, direction, and level. It can generate LTC at the same time, over the same connection.
The reader is made for troubleshooting. When a rig will not chase, plug into the line and check the code where you stand: the rate as measured against what the source claims, drop frame or not, which direction it is running, and how hot the line is. Mislabeled rates, code that should have stopped, and low or clipping levels all show up in the first few seconds. Between cues, it works as a confidence monitor on any line you need to trust.
The screen does not sleep while a mode is running, and timecode keeps going when you switch to another app. Checking a message does not stop the code.
READER
• Lock state and a full readout: frame rate with drop frame flag, measured rate, direction, level
• Runs continuously and keeps reading through route changes and interruptions
• Keeps reading in the background while you use another app
• If iOS takes the audio session away, the readout dims and says so instead of holding stale numbers
GENERATOR
• 23.976, 24, 25, 29.97 drop frame, and 30 fps
• Start from any timecode, or generate time of day
• Output level control, with left, right, or both channel routing
• Anchored to the system clock, so long runs hold their time
• Keeps generating in the background while you use another app
• Runs alongside the reader for loop-through checks
• Warns before sending LTC to a speaker, Bluetooth, or AirPlay, and requires a press-and-hold to override
REQUIREMENTS
A wired audio connection: a class-compliant USB audio interface, or a headset-jack adapter with a line input. There is no microphone mode. This version reads and generates LTC only; MIDI timecode is not supported.
PRIVACY
No account, no analytics, and no network connection. Nothing leaves the device.
Made for production sound, playback and show control, video engineering, DIT carts, and broadcast maintenance.
평가 및 리뷰
이 앱은 개요를 표시할 만큼 충분한 리뷰 또는 평가를 받지 않았습니다.
The level ladder. Its first cell now means the reader is showing decoded timecode, and it stays lit for as long as that is true, however quiet the line. Earlier versions could read an empty ladder under a green LOCKED chip on a quiet wire. The first cell also lights the moment the chip leaves NO SIGNAL, whichever way the phone is held; before, the ladder could stay dark for up to about 2 dB above the floor while the chip already said SIGNAL · NO TC, by an amount that depended on the orientation. One lit cell under LOCKED is a very quiet line that is still decoding, not a fault. The rest of the ladder reads exactly as it did.
Nothing about lock, frame rate detection, the generator or output safety changes in this release.
버전 1.1.2
Upload Studio Ltd. 개발자가 아래 설명된 데이터 처리 방식이 앱의 개인정보 처리방침에 포함되어 있을 수 있다고 표시했습니다. 자세한 내용은 개발자의 개인정보 처리방침 을 참조하십시오.
데이터가 수집되지 않음
개발자가 이 앱에서 데이터를 수집하지 않습니다.
개인정보 처리방침은 사용하는 기능이나 사용자의 나이 등에 따라 달라질 수 있습니다. 더 알아보기