MeshCom
유틸리티
무료 · iPad용으로 디자인됨 · macOS용으로는 확인되지 않음
MeshCom is a project to exchange text messages via LORA radio modules. The primary goal is to realize networked off-grid messaging with low power and low cost hardware.
The technical approach is based on the use of LORA radio modules which transmit messages, positions, measured values, telecontrol and much more with low transmission power over long distances. MeshCom modules can be combined to form a mesh network, but can also be connected to a message network via MeshCom gateways, which are ideally connected via HAMNET. This enables MeshCom radio networks, which are not connected to each other via radio, to communicate with each other.
더 보기 Auto Reconnect when the Bluetooth connection is lost (also after restarting the app, but not after deep sleep or an OTA update. Runs only in the foreground!)
New Connect tab with Live Scan and Tap to Connect
New design for Info, Settings, Heard Nodes, and Connect (Light/Dark based on system settings)
Favorites for Direct Messages
Time zone with automatic daylight saving time/standard time
and much more
4.30 10월 27일
New
New chat design: unified bubbles for To All, Group and DM, with separate colors for Light and Dark Mode and a separate shape for iOS and Android
Ack now shows the callsign of the station that heard or acknowledged the message (requires current FW)
DM status "unconfirmed" (orange icon) if no ack arrives after 6 minutes. A late ack switches the status to "confirmed".
Retry copies of a DM (FW 4.35u and newer) are stored and notified only once
Gateway: DMs between other stations are no longer shown and no longer trigger a notification
Settings: Manual Routing (Via) with destination callsign, Enable and RST (FW 4.35p and newer)
Settings: set or delete the Web UI password
Settings: optional own NTP server in the Fixed IP settings (used only with a fixed IP)
Send POS now takes TRACK mode and GPS fix into account
Info tab: firmware build date (requires current FW)
Firmware update hint when the node runs a version older than 4.35 v
Map overlay shows node name, comment, APRS symbol, INA226 (voltage/current) and MCP23017 inputs
App log: Copy button, 500 instead of 250 entries, timings for the BLE connection phases
Improved
Leading zero in the node SSID is removed (OE1KFR-02 → OE1KFR-2)
BLE disconnect alert now appears on every tab, but not after a manual disconnect
Long press in chat opens the menu after 1 s instead of 0.8 s
Base: Ionic 9 and Capacitor 8.5
Bug fixes
Android: reconnect waits briefly after a disconnect, so no more GATT error. A hanging disconnect no longer blocks the connection.
Acks are matched more reliably: only the newest message with that ID, and the message ID is read in the correct byte order
Messages containing quotation marks are now recognized as duplicates
A "{" in the text of your own DMs is preserved
Info tab starts the automatic polling immediately when opened
Node name on the map is kept after a beacon or app restart
Position data: neighbor counts of 10 and above, comment no longer read as telemetry, timestamp read even without a via path
Unknown hardware IDs show as "Unknown (id)" instead of "undefined"
Gateway server selection no longer stays empty when a web password is set
Fixed IP: label "DNS" instead of "Gateway"
Android: header, keyboard layout and notification channels
App log: the newest entries are no longer lost when the log is full
4.29 10월 2일
Chat reworked with Chat Channels and Callsign and Text Filters
Conditional Audio Notifications both via buttons
Added Pl as Country Preset and MeshCom Server Italy
Many more
4.28 9월 4일
Custom BLE Security Pin
4.27 5월 3일
Bugfix: Web server On/Off for RAK boards
Chat filter with slideable buttons on top
Added manual DNS configuration to Wi-Fi settings
Wi-Fi settings adapted to firmware
Manual position input re-added
Added Gateway Server OE/DL setting
Added T-Deck Pro and Tbeam-1W
4.26 2월 2일
Added a lot of settings in the settings tab.
Bugfix for DM Messages acknowledgement.
Background Timesync.
New sensors aded under User Buttons menu.
4.25 2025. 09. 04.
Custom APRS Symbol Setting
Added T-Beam Supreme, T-Deck+ and custom E22 ESP32S3 Board Support
+20dBm Power Setting for SX127x Chip based boards
4.24 2025. 06. 05.
fixed Regex for some callsign combinations
Pwr Slider reflects LoRa Chip bare Pwr Level
Added Clear MHeards Button under Settings Advanced
Mheards are cleared now on BLE connect
fixed no Wifi PW from node
Bugfix in BLE handling for Buttons
Added “No All Msg RX” Button
Bugfix TX Power Reading / Handling
Added LA Country Preset
Added Userinteraction on activating OTA Update
Added Setting Userbutton Pin Nr
Added custom BLE Pairing Pin Setting
Added basic Chat Filters - New Settings Wheel in top right corner
Added RX Boosted Gain Button
Bugfix for sending grp msgs number smaller 100
4.23 2025. 02. 25.
Wifi AP Button added
Disable Textfield and Sendbutton in Chat when BLE disconnected - redirect to Connect
Bugfix Database Connection Error when App was in BG
Bugfix correct order of Mheards based on NodeTime
added Local Log in Info Tab
added OTA Update Button
known Bug some Buttons have not a correct state after App was long in BG
Bugfix DB Connection
4.21 2025. 01. 24.
Updated the Chat
4.20 2024. 10. 05.
Auto Reconnect when the Bluetooth connection is lost (also after restarting the app, but not after deep sleep or an OTA update. Runs only in the foreground!)
New Connect tab with Live Scan and Tap to Connect
New design for Info, Settings, Heard Nodes, and Connect (Light/Dark based on system settings)
Favorites for Direct Messages
Time zone with automatic daylight saving time/standard time
and much more
더 보기 버전 4.30 10월 27일
데이터가 수집되지 않음 개발자가 이 앱에서 데이터를 수집하지 않습니다.