Thank you for your feedback! New features in this release: New: Time consumption for each construction stage of 3D scenes. New: Audit and test routes for continuous panning and zooming in multi-touch control. Fixed: Decoupling the background of the drawing and placeholder layers to achieve a four-layer independent rendering architecture. Fixed: High-definition rendering of atomic mutually exclusive state machines to prevent asynchronous preview disorderly overwriting. Fixed: Independent layer-based drawing of the drawing frame and support for adaptive light and dark color modes. Fixed: Griding and fault-tolerant retry of 3D scene copper surface text outlines and contours. Fixed: Encapsulation of text to support dynamic replacement of variables and filtering of empty elements. Fixed: Thread safety of layer geometry caching and composite paths across threads. Fixed: Batch emptying of the parser to automatically release the pool to reduce peak parsing memory. Fixed: Upgrade of engineering configuration. Fixed: Defects in blurry preview and high-definition viewport aliasing and ghosting when zooming and adapting. Fixed: Fault tolerance for KiCad attribute text hiding identifiers, timestamps, and floating-point parsing. Fixed: Calculation anomaly of graphic element range caused by empty boundaries of composite paths.

Thank you for your feedback! New features in this release: New: 3D preview can be embedded in the second column of the dual-view interface and supports switching between split-screen and full-screen modes. New: Supports parsing KiCad 3D model declarations and asynchronously downloading, caching, and mounting the models. New: Display the loading progress of model segments and draw bounding boxes for selected components. New: Record the time consumed for each construction stage of the 3D scene. Improved: The dual-view divider supports pinching to swap and dragging to adjust the ratio. Improved: When stackup is absent, estimate the inner copper height based on the layer sequence. Improved: Merge the text stroke outlines on the copper surface. Fixed: Change the document type identifier to a dedicated UTI.

Thank you for your feedback! New features in this release: New: 3D mode reconstructs silkscreen text into smooth-rendered line capsule primitives and supports dashed line styles; New: 3D mode enables rendering of blind, buried, and through-hole via wall metallization with copper plating, and introduces radial inward compensation for via diameters; New: 3D mode supports high-fidelity rendering of footprint-level copper shapes (fp_poly, fp_line, fp_text); New: 3D mode supports automatic edge drilling clipping and precise contour trimming for non-circular slot holes; Improved: Expression parsing kernel now uses thread-safe high-precision floating-point conversion, significantly enhancing large file loading speed; Improved: Reconstructed layer alias mapping system enables O(1) fast lookup across the entire footprint lifecycle and improved layer organization; Improved: Decoupled document loading from thumbnail generation, enabling asynchronous background rendering of thumbnails; Improved: Enhanced grid triangulation algorithm strengthens area and perimeter conservation checks for complex polygon topologies; Fixed: Routing traces and arcs are reconstructed as continuous closed capsule geometries, eliminating endpoint voids via nonzero winding number detection; Fixed: Resolved issue where pad and copper side walls in 3D mode appeared completely black under PBR lighting due to missing normal vectors; Fixed: Addressed mesh generation and triangulation defects at keyhole bridging notches between solid silkscreen and copper polygons; Fixed: Fixed problem where overlapping pads or adjacent SMD pads could occlude through-holes during inter-layer penetration; Fixed: Resolved occasional anomalies where pad geometry cache and layer state became desynchronized during undo/redo operations.

Thank you for your feedback! New features in this release: New: 3D mode reconstructs silkscreen text into smooth-rendered line capsule primitives and supports dashed line styles; New: 3D mode enables rendering of blind, buried, and through-hole via wall metallization with copper plating, and introduces radial inward compensation for via diameters; New: 3D mode supports high-fidelity rendering of footprint-level copper shapes (fp_poly, fp_line, fp_text); New: 3D mode supports automatic edge drilling clipping and precise contour trimming for non-circular slot holes; Improved: Expression parsing kernel now uses thread-safe high-precision floating-point conversion, significantly enhancing large file loading speed; Improved: Reconstructed layer alias mapping system enables O(1) fast lookup across the entire footprint lifecycle and improved layer organization; Improved: Decoupled document loading from thumbnail generation, enabling asynchronous background rendering of thumbnails; Improved: Enhanced grid triangulation algorithm strengthens area and perimeter conservation checks for complex polygon topologies; Fixed: Routing traces and arcs are reconstructed as continuous closed capsule geometries, eliminating endpoint voids via nonzero winding number detection; Fixed: Resolved issue where pad and copper side walls in 3D mode appeared completely black under PBR lighting due to missing normal vectors; Fixed: Addressed mesh generation and triangulation defects at keyhole bridging notches between solid silkscreen and copper polygons; Fixed: Fixed problem where overlapping pads or adjacent SMD pads could occlude through-holes during inter-layer penetration; Fixed: Resolved occasional anomalies where pad geometry cache and layer state became desynchronized during undo/redo operations.

Thank you for your feedback! New features in this release: New: 3D mode supports boundary clipping for intersecting drill holes along the board edges and adaptive hole drilling; New: 3D mode supports extrusion of copper foil layer graphic elements and layered rendering; New: 3D mode supports depth perception of blind and through hole layers for stacked holes and precise hole drilling; New: 3D mode supports geometric adaptive smoothing at the connection points of long strip-shaped slot holes and connected traces; New: 3D mode reconfigures silk-screened text into smooth-rendered line segment capsules and supports dashed line styles; Fixed: Routing and arcs are reconfigured into continuous closed capsule geometries, eliminating endpoint hollowing through non-zero winding numbers; Fixed: Plated pads and vias are rendered by merging independent geometric nodes to eliminate overlapping area errors in hollowing; Fixed: Based on the space grid copper filling slit segmentation algorithm, self-intersections and surface-breaking in complex slot copper filling are eliminated; Fixed: Filtering out unfilled copper border geometries to avoid wrongly extruded solid copper foil in unfilled areas; Fixed: Eliminating inconsistent states between editing history rollback and 3D rendering view; Fixed: Thread geometry snapshots and collaborative asynchronous cancellation mechanism to prevent data competition during background grid construction.

Thank you for your feedback! New features in this release: New: Support for parsing and rendering rounded corners on rectangular primitives; New: Full 3D support for F.Cu/B.Cu top/bottom copper layer text, polygonal and rectangular geometry rendering; New: 3D mode now supports precise via drilling for blind and buried vias based on layer span; New: 3D silkscreen text is now represented using segmented capsule geometries, enabling complete rendering of multi-stroke and dashed styles in Hershey vector fonts; New: 3D mode supports boundary clipping and adaptive drilling for drill holes intersecting board edges; Fixed: Routing and arcs are reconstructed as continuous closed capsule geometries, eliminating endpoint gaps caused by non-zero winding numbers; Fixed: Elliptical and slot-shaped holes use precise geometric Boolean clipping, ensuring perfect clearance between routing and drill holes without covering them; Fixed: Improved 3D rendering of bottom-layer thermal pads, solder mask clearances, and mirrored characters; Fixed: Enhanced thread-safe background processing model based on main-thread snapshots and frequent cancellation checks, eliminating multi-threading race conditions; Fixed: Overlapping pads and vias are now built with independent nodes and merged once, preventing unwanted hollowing due to global Even-Odd rules; Fixed: Polygonal copper hole detection upgraded to odd-even parity, accurately supporting embedded islands and hollowed-out copper areas; Fixed: Resolved conflicts in project file build dependencies and UUID collisions; Fixed: Addressed issues where pad coordinates and attributes were not properly synchronized during undo/redo operations; Fixed: Corrected incorrect solid copper rendering for unfilled copper pours; Fixed: Resolved triangulation crashes and copper pour loss caused by overlapping micro-spacing cuts.

Thank you for your feedback! New features in this release: New: Network floating panel now supports real-time network search filtering and fully displays design rule parameters of the corresponding network category. New: Support for parsing and rendering new primitives in KiCad 7–10, including tables, barcodes/QR codes, alignment targets, reference points, and grouped containers. New: Support for cross-layer parsing and rendering of multi-layer copper pours and keepout areas. New: Support for parsing rectangular primitive corner radii and rendering rounded corners. Improved: Enhanced interaction experience for footprint and layer pop-up panels; selected items can be deselected by clicking again. Improved: Enhanced modern parameter parsing for board-level design configuration. Improved: Unified parsing architecture with cleanup of deprecated splitting logic. Improved: Standardized unique identifiers for primitives to support multi-attribute parsing with compatibility. Fixed: Resolved conflicts between project file build dependencies and UUIDs.

Thank you for your feedback! New features in this release: New: Support net class rule parsing, including trace width, clearance, via sizes, and differential pair design rules; New: Nets floating panel now supports real-time search filtering and full display of design rule parameters for each net class; Improved: Enhanced interaction in Footprints and Layers floating panels, allowing selected items to be deselected by tapping again; Improved: Optimized initial Layers panel state by removing the default layer selection; Improved: Multilingual localization support for nets and design rules.

Thank you for your feedback! New features in this release: New: Support for target (fiducials/drill alignment marks) and point (test/marker points) element parsing and rendering; New: Support for text box border line styles (solid/dot/dash) and auxiliary dotted frame rendering when borderless; Improved: Optimized text alignment (left/center/right/top/bottom) and horizontal mirroring; Improved: Enhanced text and font width/height dimension extraction to improve typography precision.

Thank you for your feedback! New features in this release: New: Support for text_box graphic elements; Improved: Enhanced polygon arc parsing; Fixed: Board outline layer rendering.

Thank you for your feedback! New features in this release: New: Grid color selection with multiple color options; Improved: Optimized widget pagination behavior, with stable next/previous page and list boundary states; Fixed: Rotation-related positioning in floating window layouts; Fixed: Menu button displacement.

Thank you for your feedback! New features in this release: Fixed: Improved KiCad layer array format parsing, fixing numeric parsing and output issues affected by system locale settings; Fixed: Removed unused MCPServer implementation and old font formats.

Thank you for your feedback! New features in this release: New: Added MCP tools: provides file_listing, file_read, and thumbnail_read for listing files, reading PCB text, and reading PNG thumbnails; New: MCP prompt: provides pcb_review, which can generate PCB analysis prompts based on resource URI and focus; New: MCPTemplates resource directory: includes cursor, claude, and codex; Fixed: Optimized the layout of the settings page.

Thank you for your feedback! New features in this release: New: flow onto scene lifecycle; Fixed: KICAD PCB file layer parsing issues.

Thank you for your feedback! New features in this release: New: Support for Bezier curves; Fixed: Grid display size.

Thank you for your feedback! New features in this release: New: Support for embedded images; Fixed: Integer parsing; Fixed: Crash after selecting a graphic; Fixed: Precision of decimal parsing.

Thank you for your feedback! New features in this release: New: New parsing library; Fixed: iphone control panel compatible.

Thank you for your feedback! New features in this release: New: background running prompt; New: Add import function to the color Settings page; New: Settings menu app version information; Fixed: no response to update alert jump; Fixed: iCloud updates state.

Thank you for your feedback! New features in this release: New: MCP service support. Fixed: Native colors file import support; Fixed: HTTP Settings the panel.

Thank you for your feedback! New features in this release: New:Native colors file import support; New:Settings the panel.

Thank you for your feedback! New features in this release: New:WEB service port inspection and automatic processing; New:WebSocket service port inspection and automatic processing.

Thank you for your feedback! New features in this release: New: File management web service; New: Disallow the deletion of non-empty directories from the file web service; New: File web service delete file prompt confirmation; New: Manually start the file web service; New: real-time monitoring of device status; New: The folder shows the last update time.

Thank you for your feedback! New features in this release: New: Grid display, preset 6 levels grid.

Thank you for your feedback! New features in this release: New: Quick selection of appearance color; New: Quick choice of language; Fixed: Parse PCB file without handling escape character; Fixed: Some language translation errors.

Thank you for your feedback! New features in this release: Fixed: gr_arc is not displayed; Fixed: gr_rect parsing; Fixed: gr_circle parsing; Fixed: gr_line resolution.