OrbitDeck

유틸리티

무료 · iPad⁠용으로 디자인됨 · macOS⁠용으로는 확인되지 않음

OrbitDeck is a complete amateur-radio satellite station for iPhone and iPad. It predicts passes, computes Doppler, steers your radio and antenna rotator, decodes the downlink and keeps your log ready for LoTW and awards. It is free, has no ads, no accounts and no tracking, and its source code is open (MIT). TRACK AND PLAN • Live look angles, range, range rate and footprint from current orbital elements (AMSAT, CelesTrak or your own source), computed on your device with SGP4/SDP4. • Next passes with quality scoring, a daily schedule, a pass timeline, all-sky radar, sky plot, ground track and 3D globe. • Automatic satellite switching across up to 9 priority satellites, with a 12-hour simulated plan. • Weather and cloud cover for visible passes, activation reminders, AMSAT status, space weather, workable grids, states and DXCC, and orbital analysis. • Cached data keeps core tracking working offline. NEXT PASS ON THE LOCK SCREEN • A Live Activity counts down to AOS, then shows time left and a progress bar through the pass, on the Lock Screen, in the Dynamic Island and in the Apple Watch Smart Stack. It keeps advancing while OrbitDeck is closed. (Live Activity requires iOS 18 or later.) RIG CONTROL (CAT) AND DOPPLER • Live Doppler for every transponder, per-satellite calibration, and a no-CAT HOLD/TUNE calculator. • Doppler tuning over a Bluetooth LE serial adapter, Icom network (Wi-Fi), the IC-705/IC-905's built-in Bluetooth, or a Hamlib rigctld server. • Radio families in the catalog: Icom CI-V (IC-9700, IC-9100, IC-910, IC-821, IC-820, IC-970, IC-705, IC-905, IC-7100, IC-7000, IC-706 series and older VHF/UHF rigs, plus IC-R receivers), Yaesu (FT-847, FT-736R, FT-817/818/857/897, FT-100, VR-5000), Kenwood (TS-2000, TS-790, TS-711/811, TS-590/590SG/890/990, TH-D74/D75), and any radio Hamlib supports through rigctld. • One full-duplex radio, split-VFO Doppler on one radio, or two radios (including a satellite rig as one leg). Tune modes, per-satellite CTCSS, data modes for digital work, a Beacon button and a one-tap Stop all. • Built-in rigctld and rotctld servers (off by default, with client approval) let programs on your local network share the radio and rotator. ROTATOR CONTROL • Yaesu GS-232A/B (including azimuth-only), Easycomm I/II/III, SPID Rot2Prog and SAEBRTrack over a Bluetooth LE serial adapter, or rotctld, PstRotator and OZ9AAR URC over the network. • Pre-positioning, flip mode, parking, manual control, position read-back, a self-test, and Sun and Moon targets. DIGITAL MODES Audio comes from a USB audio interface, an Icom network-audio radio, or the built-in microphone. All decoding happens on your device. • CW: the DeepCW neural decoder, or the Classic decoder with tone search, filters and adaptive speed. Tap a callsign to log it. • FT4 on linear transponders, with signal subtraction, a deep decode pass, wait-and-pounce and a TX watchdog. • Packet and APRS: 1200 and 9600 baud modems or a KISS TNC (Bluetooth LE or TCP), messaging and beacons through satellites and the ISS, a station map and per-pass logs. • SSTV: satellite and ISS images in the common Robot, Martin, Scottie and PD modes. • Pass recording and voice memos; recording and decoding continue with the screen locked. LOGGING AND AWARDS • An on-device QSO log with LoTW upload (signed on your device), Cloudlog/Wavelog upload, ADIF import and export, QRZ lookups and PDF reports. • Totals for QSOs, satellites, VUCC grids, WAS and DXCC, worked vs. confirmed. TOOLS AND LEARNING • Grid and location converters, distance and bearing, 60+ calculators, Tiny BASIC, lessons, references and Notes. • In-app Help, a station readiness checklist, and backup and restore. Transmitting requires an amateur radio license and your own equipment. Rig and rotator control work while OrbitDeck is in the foreground. Tracking, planning and logging need no extra hardware. Please support AMSAT, which builds many of the satellites OrbitDeck tracks.

  • 이 앱은 개요를 표시할 만큼 충분한 리뷰 또는 평가를 받지 않았습니다.

OrbitDeck 1.1 is the biggest update since launch. It turns the tracker into a station controller. • CW decoder: copy Morse on the downlink. The DeepCW neural decoder (on-device, the new default) handles weak signals and uneven fists; the Classic decoder adds tone search with AFC, 50/100/200 Hz filters, squelch and 5–50 WPM. Tap a decoded callsign to log it. • Packet and APRS: built-in 1200 baud AFSK and 9600 baud G3RUH modems, or a KISS TNC over Bluetooth LE or TCP. APRS messaging and beacons through satellites and the ISS, a map of heard stations, a per-pass frame log with statistics, alerts for messages to you, and an optional receive-only satgate. • Awards and a better log: QSO, satellite, VUCC grid, WAS and DXCC totals, worked vs. LoTW-confirmed; a LoTW station-location picker with subdivisions and IOTA; voice memos that become QSO entries; PDF log reports; DXCC and country on every QSO. • Station control: two-radio stations, including a satellite rig as one leg; split-VFO Doppler on one radio; IC-705/IC-905 built-in Bluetooth; a live tune-mode selector (Full, Downlink only, Uplink only, Hold); a Beacon button; per-satellite CTCSS and data modes; and a one-tap Stop all. • Network servers: built-in rigctld and rotctld servers let programs on your local network share OrbitDeck's radio and rotator links. Off by default; new clients need your approval. • Automatic satellite switching: up to 9 priority satellites, switched as each one rises, with a 12-hour simulated plan and a pass timeline on Home. • Rotator control: manual jog and go-to, position read-back with a stall warning, a self-test, automatic retry, and Sun, Moon and fixed-bearing targets. • Live Activity, Dynamic Island and Apple Watch: the next pass counts down on the Lock Screen and runs through the pass and on to the next while OrbitDeck is closed, with a compact Apple Watch Smart Stack layout (iOS 18 or later). • FT4: signal subtraction, a deep "Decode again" pass, DT filtering, Band Activity shading for new calls and grids, a TX watchdog and a short Tune carrier. • SSTV: Martin M3/M4 and Scottie S3/S4, damaged-header fallback, noisy-line repair and automatic start and stop by elevation. • Planning extras: weather and cloud cover on visible passes, activation reminders, AMSAT status with heard marks, a Nearby & DX hub, a location converter, grid distance and bearing, workable states and DXCC, comet positions, Notes, in-app Help, a station readiness checklist, and backup and restore. Safer transmitting and more reliable operation • One transmitter authority for every mode: only one feature keys the radio at a time, Stop and disconnect always unkey, and every mode has a maximum key time. • Transmit refuses a receive-only transponder; FT4 refuses FM-only transponders and Tune needs Transmit on and a callsign. • Network PTT is a separate opt-in with a 3-minute limit, and clients are refused over VPN and cellular. • The rotator retries failed moves instead of skipping them. • An unreadable log file is set aside, never overwritten, and only QSOs the server accepted are marked uploaded. • Imported TLE/OMM elements persist, malformed elements are skipped, and geostationary satellites such as QO-100 show as continuously visible. • The audio input is watched for stalls and restarted, and the screen stays awake while a decoder or recording runs. • Faster FT4 and waterfalls, layout fixes on smaller iPhones, and VoiceOver improvements.

Paul Stoetzer 개발자가 아래 설명된 데이터 처리 방식이 앱의 개인정보 처리방침에 포함되어 있을 수 있다고 표시했습니다. 자세한 내용은 개발자의 개인정보 처리방침 을 참조하십시오.

  • 데이터가 수집되지 않음

    개발자가 이 앱에서 데이터를 수집하지 않습니다.

    개인정보 처리방침은 사용하는 기능이나 사용자의 나이 등에 따라 달라질 수 있습니다. 더 알⁠아⁠보⁠기

    개발자가 이 앱이 지원하는 손쉬운 사용 기능을 아직 등록하지 않았습니다. 더 알아보기

    제공자
    Paul Stoetzer
    크기
    29.5 MB
    카테고리
    유틸리티
    호환성
    iOS 17.0 이상 필요
    • iPhone
      iOS 17.0 이상 필요
    • iPad
      iPadOS 17.0 이상 필요
    • Mac
      macOS 14.0 이상 및 Apple M1 칩 이상이 탑재된 Mac이 필요
    • Apple Vision
      visionOS 1.0 이상 필요
    언어
    영어
    연령 등급
    전체
    저작권
    © 2026 Paul Stoetzer