- Added supported for iPadOS 18 - Solved some minor bugs

TF5, TF3, TF1, and TF-RACK products on different subnets can now be controlled. * The position of the fader values and CUE buttons in the HOME screen has been altered. Fixed some minor bugs. *Level meters do not operate when controlling devices on a different subnet.

- Modified the UTILITY screen - Added MUTE3-6 buttons - Added User Defined Buttons - Added Recorder - Added the SEND TO screen - Added "Copy/Paste" menu displayed by long tap on the destination channel - Added Fade display to the SCENE screen - Added Freq/Gain Lock at the EQ screen - Added switching to User Defined Buttons on the context menu - Added "CH Copy/Paste with Sends" menu to the context menu on the HOME screen - Added [SEND SEL]> [CUE] Link to preference - Added exiting SENDS ON FADER mode by tap the destination channel again - Fixed some minor bugs

- Support for iOS11. - Fixed some minor bugs.

- This version supports TF series firmware V3.5 - Added the “frame” unit for Delay Time parameter setting in the OUTPUT DELAY effect of FX. - Added some improvements, and fixed some minor bugs.

- This version supports TF series firmware V3.01. - Solved a problem in which, when operating the analog gain (A.Gain) of a channel not set to the Stereo Link function, and if Stereo Link has been set to the channel using the same INPUT jack (TF5:CH1-8 and CH33-40, TF3:CH1-16 and CH25-40, TF1:CH1-16 and CH17-32), the unlinked channel would also link to the corresponding next channel regardless of the input source selection.

- This version supports TF series firmware V3.0. - Now supports TF-RACK. - Added a FX screen. - Added Stereo Link Setting and Input Source Setting to the INPUT screen. - Added Custom Faders. - Now supports a wired connection to a network. (iOS9.3 and later) - Added some improvements, and fixed some minor bugs.

- This version supports TF series firmware V2.5. - Now supports MATRIX CH. - Added the DELAY screen to edit the Delay function in the MATRIX CH. - The SELECT MIXER screen now indicates when the TF Editor and TF StageMix connected to the TF series have reached the maximum number of connected units. - Added some improvements, and fixed some minor bugs.

- This version is compatible with the TF series firmware V2.0. - Added a function for sending signals to the SUB bus from ST IN1/2 or FX RTN 1/2. - Added a function to display the INPUT source “SLOT.” - Added a “Scene Store/Edit” function via the TF StageMix. - Added a “real time analyzer (RTA)” function for use with the internal microphone of an iPad. - Added an “All MUTE” function on the Utility screen. - Changed the step of the up and down buttons to allow faders to be set in increments of 0.5dB. - Solved the problem in which the All MUTE operation on the TF series was not reflected in the TF StageMix. - Several bug fixes and functional improvements.