CNC Toolkit
工具程式
USD 9.99 · 專為 iPad 設計。尚未針對 macOS 驗證。
CNC Toolkit is a control panel for the hobby and small-shop CNC router. Load a bit from your rack, read the setup like a DRO, and get on with the cut.
It doesn't guess your chipload. You enter the numbers from your bit maker's chart once, per bit and per material, and every tool uses them.
CUTTING
• Feeds & speeds: RPM, feed rate and surface speed, either way round, inch or metric
• Chipload check: your feed and RPM against the range you saved for that bit
• Chip thinning: the feed for light side cuts, with an engagement diagram
• Stepover & stepdown, and ball-nose scallop height both ways
V-CARVING
• V-bit depth and width for any angle, flat tip or sharp
• V-carve inlay: where the plug seats, the glue gap and the board gap, drawn to scale
PLANNING
• Surfacing time and passes for spoilboards and slabs
• Job time from your CAM's path lengths, plunges, rapids and tool changes
• Sheet yield: parts per sheet and sheets per job, with the bit's width between parts
• Full-size printable templates: spoilboard hole grid, V-bit angle gauge, test-cut sheet
SHOP RECORDS
• My Bits: diameter, flutes, angle, max RPM and your chipload ranges
• Machines: travel, spindle range, rapid rate, run hours and maintenance due
• Job log with photos, and one tap to recall a job's settings
REFERENCE
• Bit types, with drawings: upcut, downcut, compression, O-flute, ball, tapered ball, V, surfacing and more
• G- and M-codes in plain words
• Tap drills from the percentage-of-thread formula, with the nearest inch, number, letter and metric drills
• Wood species density and hardness, and cutting notes for sheet goods, plastics, foam and aluminium
• Fraction calculator and converter, to 1/64 with the error in mm
Inches, fractions or millimetres throughout. Dark control-panel look, or light. Works offline. No account, no ads, no tracking.
Results are calculations from the numbers you enter, not cutting recommendations. Check them against your bit maker's data and make a test cut. Never run a bit above its rated speed.
評分與評論
- 此App未收到足夠的評分或評論以顯示概況。
開發者Nerd Alchemy LLC表明App的私隱慣例或包括下列資料的處理。詳情請參閲 開發者的私隱政策 。
不收集資料
開發者不會從此 App 收集任何資料。
輔助使用
開發者尚未表示此 App 支援哪些輔助使用功能。 進一步了解
資料
- 供應商
- Nerd Alchemy LLC
- 大小
- 7.2 MB
- 類別
- 工具程式
- 相容性
須使用 iOS 26.0 或以上版本。
- iPhone
須使用 iOS 26.0 或以上版本。 - iPad
須使用 iPadOS 26.0 或以上版本。 - Mac
須使用 macOS 26.0 或以上版本及配備 Apple M1 或以上版本晶片的 Mac。 - Apple Vision
須使用 visionOS 26.0 或以上版本。
- iPhone
- 語言
- 英文
- 年齡分級
4+
- 4+
- 版權
- © 2026 Nerd Alchemy

