RT60
音樂
USD 34.99 · 專為 iPad 設計。尚未針對 macOS 驗證。
Now you can have an RT60 measurement tool for the iPhone. Another in the series of acoustic analysis and test applications from Studio Six Digital, RT60 measures reverb decay time for each octave band, 63Hz - 4kHz, by pulsing pink noise on and off, filtering the incoming signal by octave band, and measuring the timing of the decay of each octave band.
RT60 conforms to international acoustics standard ISO 3382
for measuring room decay time (RT) using either the T20 or T30 method.
RT60 will measure down to 50ms, and up to 4 seconds. Results are displayed for each band above the band, and the overall RT60 is calculated and displayed on the top of the screen.
RT60 requires at least 25dB of headroom between the noise floor of the environment, and the level of the pink noise for T20 analysis. Turn up the amplifier to get more headroom.
To use RT60, connect the iPhone output to the input of an amp and speaker, and carefully turn up the level after you tap the Generator icon. RT60 smoothes the results of several readings to get a more stable result.
*** Screen Graphics
The red bars are the current SPL level for each octave band. The thin black bars show the most recently measured maximum and minimum dB levels for the octave band that the RT60 calculation is using. The vertical yellow bars show the decay range that is available. Note that in some situations, you may not be able to overcome the ambient noise level in the room to get a good reading in every band.
*** Calculations
If a valid RT60 time can be computed, it is shown above the yellow bar. If it cannot be computed, no bar or value is shown.
When your analysis is complete, you can save the graph image to your photo roll to include in a report.
*** Calibration & Microphone
Like all of the Studio Six Digital apps, RT60 can be calibrated. We set this field to the typical iPhone value, but if you have access to a calibrated SPL meter you can adjust this number as needed.
There is a field to select Internal or External microphone. When Internal is selected, a compensation network is used to compensate for the response of the built-in or headset mic. When External is selected, no compensation is done.
See our web site for more detailed information.
Also, check out our other great audio and acoustics apps: AudioTools, SPL, SPL Graph, for recording SPL over time, RTA, ETC, FFT, Generator, and Speaker Pop.
And, if you are looking for a great range of high-quality, professional, audio test equipment, check out iTestMic, iPrecisionMic, or liAudioInterface2.
評分與評論
- 此App未收到足夠的評分或評論以顯示概況。
New in this release:
- Ready for iPhone Duo: every screen adapts to closed, open, book and tent, with controls in the side strip.
- iOS 26 appearance adopted.
- Bug fixes and stability improvements
開發者Andrew Smith表明App的私隱慣例或包括下列資料的處理。詳情請參閲 開發者的私隱政策 。
不收集資料
開發者不會從此 App 收集任何資料。
輔助使用
開發者尚未表示此 App 支援哪些輔助使用功能。 進一步了解
資料
- 供應商
- Andrew Smith
- 大小
- 29 MB
- 類別
- 音樂
- 相容性
須使用 iOS 15.0 或以上版本。
- iPhone
須使用 iOS 15.0 或以上版本。 - iPad
須使用 iPadOS 15.0 或以上版本。 - iPod touch
須使用 iOS 15.0 或以上版本。 - Mac
須使用 macOS 12.0 或以上版本及配備 Apple M1 或以上版本晶片的 Mac。 - Apple Vision
須使用 visionOS 1.0 或以上版本。
- iPhone
- 語言
繁體中文及另外8種
- 繁體中文、德文、日文、法文、波蘭文、瑞典文、簡體中文、英文、西班牙文
- 年齡分級
4+
- 4+
- 版權
- © Andrew Smith
