CNC Toolkit

Utilidades

$199.00 · Diseñado para iPad. No verificado para macOS.

CNC Toolkit is a control panel for the hobby and small-shop CNC router. Load a bit from your rack, read the setup like a DRO, and get on with the cut. It doesn't guess your chipload. You enter the numbers from your bit maker's chart once, per bit and per material, and every tool uses them. CUTTING • Feeds & speeds: RPM, feed rate and surface speed, either way round, inch or metric • Chipload check: your feed and RPM against the range you saved for that bit • Chip thinning: the feed for light side cuts, with an engagement diagram • Stepover & stepdown, and ball-nose scallop height both ways V-CARVING • V-bit depth and width for any angle, flat tip or sharp • V-carve inlay: where the plug seats, the glue gap and the board gap, drawn to scale PLANNING • Surfacing time and passes for spoilboards and slabs • Job time from your CAM's path lengths, plunges, rapids and tool changes • Sheet yield: parts per sheet and sheets per job, with the bit's width between parts • Full-size printable templates: spoilboard hole grid, V-bit angle gauge, test-cut sheet SHOP RECORDS • My Bits: diameter, flutes, angle, max RPM and your chipload ranges • Machines: travel, spindle range, rapid rate, run hours and maintenance due • Job log with photos, and one tap to recall a job's settings REFERENCE • Bit types, with drawings: upcut, downcut, compression, O-flute, ball, tapered ball, V, surfacing and more • G- and M-codes in plain words • Tap drills from the percentage-of-thread formula, with the nearest inch, number, letter and metric drills • Wood species density and hardness, and cutting notes for sheet goods, plastics, foam and aluminium • Fraction calculator and converter, to 1/64 with the error in mm Inches, fractions or millimetres throughout. Dark control-panel look, or light. Works offline. No account, no ads, no tracking. Results are calculations from the numbers you enter, not cutting recommendations. Check them against your bit maker's data and make a test cut. Never run a bit above its rated speed.

  • Esta app no ha recibido suficientes calificaciones ni reseñas para mostrar un resumen.

El desarrollador (Nerd Alchemy LLC) indicó que las prácticas de privacidad de la app pueden incluir el manejo de datos que se describe a continuación. Para obtener más detalles, consulta la política de privacidad del desarrollador .

  • No se recopilan datos

    El desarrollador no recopila ningún dato en esta app.

    Las prácticas de privacidad pueden cambiar; por ejemplo, según tu edad o las funciones que uses. Obtén detalles

    El desarrollador aún no ha indicado cuáles funciones de accesibilidad admite esta app. Obtén detalles

    Vendedor
    Nerd Alchemy LLC
    Tamaño
    7.2 MB
    Categoría
    Utilidades
    Compatibilidad
    Requiere iOS 26.0 o posterior.
    • iPhone
      Requiere iOS 26.0 o posterior.
    • iPad
      Requiere iPadOS 26.0 o posterior.
    • Mac
      Requiere macOS 26.0 o posterior y una Mac con el chip M1 de Apple o posterior.
    • Apple Vision
      Requiere visionOS 26.0 o posterior.
    Idiomas
    Inglés
    Edad
    4+
    Copyright
    © 2026 Nerd Alchemy