Backend Adjustments – for Use via the Proxy

An issue that caused the app to crash on larger screens has been resolved.

- Zwave JS Update Channel

#Improvements new device: Hörmann Supramatic H4

## Enhancements - Simplified connection to FRITZ! devices: It is now possible to connect using only the password (aka FRITZ!Box-Kennwort). Providing a username is optional but still supported. ## New Devices - AVM FRITZ!Smart Control 440 - AVM FRITZ!Smart Energy 200 - AVM FRITZ!Smart Energy 210 - AVM FRITZ!Smart Thermo 302 - EUROtronic Stella R EnOcean

## Changed - When logging in, a warning is displayed if read-only mode (bug) occurs ## Devices FlexTron (EnOcean): - ALADIN Sendemodul - ALADIN Funk-Bewegungsmelder Shelly Wave (Z-Wave GEN7): - Shelly Wave Shutter - Shelly Wave 1 - Shelly Wave 1PM - Shelly Wave 2PM Shelly: - Shelly Wall Display - Shelly PM Mini (Gen 3) - Shelly H&T (Gen 3) - Shelly 1PM Mini Gen3 - Shelly 1 Mini Gen3 - Shelly PM Mini Gen3 - Shelly H&T Gen3 Andere: - Fritz!DECT 440 ## :bug: Bugfixes - Shelly 1 no longer shows current consumption (Shelly 1 cannot measure this) * - Shelly 3EM now correctly displays summed consumption and total consumption* - Shelly 3EM can now also display negative consumption * - Support for buttons on 2nd generation Shellies (e.g. Shelly Plus i4) * - Double, triple and long click can now be used - The status of the Shelly 2.5 in shutter mode is now displayed correctly - On the Shelly TRV, the target temperature can now be set in 0.5° increments * - Deactivating the watchdog now works on the Shelly TRV with an active heating plan; This means that a manually set target temperature is not immediately overwritten **_For *: Device must be queried again using the WebApp_**

## Devices - Shelly Pro 3EM - Shelly Vintage A60 - Shelly Vintage ST64 - Shelly Plus i4 - Shelly Plus i4DC - Shelly Pro 4PM - Shelly Plus 2PM - Omnio UPS230/08 - Omnio UPS230/12 - Omnio UPS230/10 - Omnio REGS12/08M - Omnio REGS12/04M - Omnio KXJ230/12 - Omnio UPJ230/12 - Omnio REGJ12/04M - Omnio UPD230/10 - Omnio RTF-161 - Omnio RTF-160 - Omnio UPH230/10 - Omnio UPH230/12 - Omnio REGH12/08M - Omnio miniT01 - Omnio TST230/12 - Omnio TST230/10 - Flextron ALADIN Flextron ALADIN button single - Flextron ALADIN Flextron ALADIN button double - Flextron ALADIN Flextron ALADIN mini remote control - Flextron ALADIN wireless room thermostat Suisse / Indoor-Solarzelle / 300385 - Flextron ALADIN wireless room thermostat Suisse / Indoor-Solarzelle / 300386 - Flextron ALADIN Turo multisensor / 300395 - Flextron ALADIN EnO recipient 1-channel / 300611 - Flextron ALADIN EnO recipient 1-channel pot.free / 300613 - Flextron ALADIN EnO recipient 2-channel / 300621 - Flextron ALADIN EnO blinds-recipient / 300631 - Flextron ALADIN blinds-recipient / STAK-STAS Hirschmann / 300635 - Flextron ALADIN wireless smoke detector / 300726 - Flextron ALADIN wave / proximity switch / wireless / 300050 - Flextron ALADIN Fensterkontakt II / 300754 - Flextron ALADIN EnO recipient 2-channel / 24V / 300671 - Flextron ALADIN EnO recipient 2-channel / 12V / 300676 - Flextron ALADIN EnO DALI controller broadcast / 300505 - Flextron ALADIN EnO heating receiver 1-channel pot.free / 300683 # improvements - A matter bridge that allows some homee devices to be used in other smart home systems.

- Fixed a display error when updating values ​​from BiSecur devices.

## Features + Weather forecasts are now available for the current day (morning, afternoon, evening, night). + Alarms can be reseted by homeegrams. + Device history can be disabled globally. ## Devices + Abus PLSG10100 Nexello Outdoor Siren + Abus PLMK10000 Z-Wave covert Door/Window Sensor + ABUS Nexello Info Indoor Sirene PLSG10000 + Abus PLMK10100 Nexello Bypass opening detector

## Features - SmartStart devices can now also be added via the QR code via the barcode scanner in the "Add device" area. ## Devices - Support for Z-Wave Devices with the new GEN7 Cube: - AeotecWater Sensor 7 Pro (ZWA019-C) - Aeotec Water Sensor 7 (ZWA018-C02) - AeotecDoor/Window Sensor 7 Pro (ZWA012-C02) - FIBARO RGBW Controller 2 - Cyrus SmartHome Flood Sensor - Aeotec Smart Switch 5 (ZW075) - Everspring AN 180-2 ON/Off MiniPlug - Aeotec LED STRIP (ZW121) - Aeotec Door/Window Sensor 7 (ZWA011) - Aeotec RGBW Bulb E27 (ZWA002) - FIBARO Motion Sensor - FIBARO Dimmer 2 - EUROtronic Spirit Z-Wave Plus - Aeotec Siren - TKBHOME On/Off Plug - Secure Controls Secure Smart Plug 302 Socket Energy Meter - Qubino Smart Plug 16A - POPP Rauchwarnmelder mit Innensirene - Permundo Smart Mini Plug PSC132ZW - Hoppe Fenstergriff ConnectSense - FIBARO Wall Plug - FIBARO Smoke Sensor - FIBARO Single Switch 2 - FIBARO Roller Shutter 2 - FIBARO Double Relay Switch - FIBARO Door/Window Sensor 2 - Eurotronic Luftgütesensor Z-Wave Plus - Devolo Schalt- und Messsteckdose - Devolo Heizkörperthermostat - Devolo Fenster/Türkontakt - Cyrus Zwischenstecker - Cyrus Tür/Fensterkontakt - Cyrus 4-in-1 Multisensor - Aeotec Smart Switch 7 - Aeotec Smart Switch 6 - Aeotec Recessed Door Sensor 7 - Aeotec MultiSensor 6 - Aeotec Home Energy Meter - Aeotec Heizkörperthermostat - Aeotec Door/Window Sensor 7 (ZWA008) - Aeotec Door/Window Sensor 6 - ABUS Z-Wave Wassermelder - ABUS Z-Wave Tür-/ Fensterkontakt - ABUS Z-Wave Rauchmelder - ABUS Z-Wave Innensirene - AeotecDoor/Window Sensor 7 - Strip Guard 700 - Other devices: - Support for AVM FRITZ!DECT 302 - Support for NUKI SMART LOCK 3.0 - Support for Shelly Motion 2 - Support for Shelly H+T Plus

# Changed * Color improvement for Hörmann Links (Bisecur / Bisecur2 nodes) in dark mode

# Added * Added support for Shelly second-generation devices * Added support for Omnio devices * Update polish translations # Fixed * Added missing button to be able to learn Shelly door/window sensor

# Added * Added support for Shelly first-generation devices * Added support for Müller-Licht Outdoor LightStrip

# Changed * Ability to switch-off Watchdog Feature per device * Ability to filter diary for Watchdog-Notifications

## Changed * The watch app can now be started directly on the Apple Watch without performing an action * The values of BiSecur devices can now be queried regularly * Support for new devices * Ability to switch-off push-notifications and email-notifications from Watchdog per user ## Fixed * Further display errors in the controls of garage doors have been fixed * Minor text fixes

## Fixed * Display errors in the controls of garage doors have been fixed

## Fixed * Fix checking security level after teach in of zwave devices * Fix zwave device statistics in device list * Minor text fixes

## Added * The dawn automation completes the trio of scenarios. You can use it to open and close your roller shutters in the morning and in the evening with brightness control. * There is now a homee Apple Watch app again. * If you have a problem, you can now contact support directly from the app. Go to the support area in the settings. * New functions for BECKER CentronicPLUS devices: Supported devices can now be (un)locked and the driving speed can be selected in homeegrams. * Support for new WiFi, Z-Wave and WAREMA WMS devices. ## Changed * In plans and scenarios, more information is displayed when selecting devices that have multiple instances of a property. * Add search to widget object selection. ## Fixed * A few display errors in dark mode have been corrected in the sun automation. * The value input in the sun automation now validates the values entered. * In the brightness settings of the sun automation, the current brightness is now also kept current as long as the screen is open. * Deselecting all receivers in the sun automation now works as expected with many devices in the list. * Display errors in the slat tracking screen of the sun automation under iOS 13 have been fixed. * The creation of automatic sun automations is now easier to cope with when switching back and forth between the screens. * The preview of a note is now also updated when the note has been emptied. * The presence smart widget now reliably updates the presence status of the current user. * Add missing icons icons and cube colors to widget. * The correct teach-in of the Jung Pumpen radio transmitter FTJP is now possible again. * Various crashes have been fixed. * Minor text fixes.

## Added * Support for new Centronic Plus devices ## Changed * The icons of the new plans can now also be used for homeegrams and groups * A descriptive text for the slat tracking in the sun automation has been added ## Fixed * On the iPad the texts in the tab bar are no longer cut off * A crash when configuring the sun automation with an awning bundle has been fixed * The icon of repeaters was not always displayed. This has been fixed * Minor text fixes

## Added * The scenarios have grown: There is now also a sun automation. With this, shutters and blinds can be easily controlled based on brightness values. * Something has also changed in the plans: heating plans now also support electric heating. There is also a time plan to switch devices on/off according to a weekly schedule. And with the presence simulation plan, devices can be switched at random times. * Push messages can now also be sent as critical messages, so that they are always delivered with sound. This can be set for device alarms and individual homeegrams. * Support for new WiFi and BiSecur devices ## Changed * There are now icons for awning, awning and weather station * For the websocket connection, the websocket handling integrated directly in iOS is now used instead of a third-party library in order to improve stability and performance * The arrangement of the elements on the scenario detail screen has been revised ## Fixed * Missing texts for the climate mode have been added * The correct values are now displayed in the diary when BiSecur devices are switched * The app's start screen is now also dark in dark mode * The maximum value for the switch-off delay in the wind monitoring has now been adapted to the other platforms * The color of the radio buttons in the sensor selection of the wind monitoring is now correct * A back button was incorrectly displayed in the scenario detail screen on iPad * Restrictions can now be set for all items in the list * A crash in the search in the homeegrams has been fixed * Fixed a crash in the setup process * In the device detail screen, the order of the properties was sometimes undefined * Minor text fixes

## Added * There is now a new type of automations: scenarios. They should make some use cases more easy. Wind monitoring is the first scenario. When there is strong wind they move shutters, blinds or awnings into a safety position and lock the control. * Support for new Zigbee, EnOcean, Z-Wave and BiSecur devices * Support for BECKER CentronicPLUS Cube ## Changed * Reset accumulated energy use of devices * New ventilate function for supported Hörmann garage door operators * When searching homeegrams, hidden homeegrams can now also be searched directly. * After the successful scan of a QR or barcode, there is now haptic feedback * During the homee update, the individual steps are now also announced by VoiceOver * The serial number of the WAREMA WMS Cube is now shown in the settings * If an attempt is made to teach-in an incompatible WAREMA WMS device, an error message is now displayed * Further configuration options are now available for WAREMA sun shading devices * Additional device types are now available in demo mode ## Fixed * When establishing a connection to larger homee installations or via a slow connection, there is no longer a timeout * Icon selection now also works with VoiceOver * Fix selection of weekdays in homeegrams when VoiceOver is active * Teaching-in of Belkin WeMo devices is now possible again * When teaching in homee ENERGIEMANAGER, Belkin WeMo and WOLF devices, all texts are now displayed again * Errors in the configuration of the WiFi in standalone mode have been fixed * A few display errors have been corrected in the list of registered homees * The back navigation via gestures in the setup process is now deactivated to avoid unwanted states Announcement: Release 2.33 will be the last version with support for iOS 12. From 2.34 onwards iOS 13 is required.

## Added * Support for MACO eTRONIC window contact ## Fixed * The homee language is now correctly set in the setup process

## Added * Support for new Z-Wave, EnOcean and ZigBee devices * Support for Steca inverters (Wifi) ## Changed * The accessibility has been improved. Help texts for VoiceOver have been added to the icon buttons in the navigation bar and the buttons for controlling devices. The current homee mode is now recognized on the dashboard and the texts of the individual dashboard tiles are sensibly summarized. * The WAREMA devices are now visible in the device list when teaching in, even without a cube * Device links can now be created from both sides, from the sensor and from the actuator * In the plans you can now specify which property of a device should be switched if the device has several suitable properties * The teaching-in of Nuki, AVM and Homematic Wifi devices has been revised * The barcode scanner when teaching in devices now supports additional barcode types * Various optimizations have been made on the email verification screen * The user settings can now be opened directly from the presence tile on the dashboard to manually adjust the presence or change the settings * In the geofence screen in the user settings, the elements are now better grouped * The display for the time and date picker has been adapted again for iOS 14 * An explanation has been added why the homee app needs to access the local network * The demo mode is now up to date again ## Fixed * A crash when changing the query interval for myStrom Plug has been fixed * Fixed a crash when performing actions in push messages * After creating a new plan, the screen can now be closed with a button * An error in which entries in the settings of the FTP server, history data export and automatic backups were not saved has been fixed * After creating a user in the setup process, a login screen was displayed unnecessarily in some situations * After scanning the QR code in the setup process, the following screens will no longer open multiple times * After scanning the barcode when adding a device, the following screens are no longer opened multiple times * The error messages for certain errors when reporting the presence status have been improved * Automations created by the installer can now also be edited by him * Plans created by the installer can now only be edited by the installer * Missing texts for the LED color mode of Aeotec devices have been added * In the info and error sheets that are used in the setup process and when adding devices, the title is now wrapped if there is not enough space * The buttons in the history data display of devices now have a more visible color * An error where a text field was sometimes displayed behind sliders has now been fixed * A graphic error in the color picker has been fixed * Various crashes have been fixed * Minor text fixes

## Features * Support for WAREMA WMS Cube * Support for WAREMA WMS Devices

## Added * Every user now has a presence state that can be changed via geofence and homeegrams and is available as a trigger and condition in homeegrams * In device and weather triggers and conditions the value can be compared to the value of another device * Email notifications are now available in homeegrams and for predefined system events * Dropbox can now be used as destination for automatic backups and history export * Support for new EnOcean devices (AFRISO + Eltako/PioTek Tracker) * Support for new Z-Wave devices (Qubino) * The app is now available for Apple Silicon Macs ## Changed * When adding new devices the EAN code on the packaging can now be scanned to show the corresponding manual * Added manual trigger to update location via the location service * The process to add links between devices has been improved * Add diary entries for failed push notifications * Add handling for iOS 14 date/time pickers ## Fixed * Fix showing a textfield behind sliders * In the user settings for push and e-mail notifications, the switches no longer change their value when scrolling * Fix node history loading on app reopen * Fix number of retries when searching for homee during setup process * Fix opening core release notes after an update was started * Minor text fixes