FeedbackGuard
Muziek
€ 4,99 · Ontworpen voor iPad. Niet geverifieerd voor macOS.
FeedbackGuard is an Audio Unit v3 effect that stops acoustic feedback before it ruins your performance. Whether you are singing live, speaking on stage, or recording vocals on iPad, FeedbackGuard listens for runaway howling and automatically places precise notch filters — so you can focus on the show, not the squeal.
HOW IT WORKS
FeedbackGuard uses PNPR (Peak-to-Neighbourhood Power Ratio) analysis combined with a growth check to tell real feedback apart from normal voice, speech, or room tone. When a howling peak starts to build, the plugin tracks it and deploys an adaptive notch bank that reacts in milliseconds.
Before the show, Room Setup locks permanent red notches on your room modes. During the show, choose Standard Adaptive (narrow notches) or AI mode — AI keeps the voice and pulls down howls, room, noise, and bleed. If playback bleeds into the mic, Sidechain subtracts that reference from detection — analysis only, never mixed into the output.
KEY FEATURES
• AI mode — keeps the voice; ducks howls, room, noise, and bleed (0 ms or ~11 ms)
• Room Setup — permanent red pins for your room (do this first)
• Real-time howling detection (PNPR + run-up check)
• Adaptive notch bank — up to 24 simultaneous notches (Standard mode)
• Sidechain / reference masking (Bus 2 or Main L/R) with connection status
• Live spectrum display with Setup and Adaptive markers
• “Balanced” preset for safe, transparent defaults
• User preset slots — tap to recall, hold to save / overwrite / rename / delete
• Fine-tuned controls: Sensitivity, Notch Threshold, Suppression, Q, Attack, Release
• Optional harmonic tracking for stubborn feedback tones
• Optional spectral noise reduction for quiet passages
• Full bypass
GET STARTED IN SECONDS
1. Open your AUv3 host (GarageBand, AUM, Cubasis, and more)
2. Insert FeedbackGuard as an audio effect on your vocal or monitor channel
3. Run Room Setup — raise gain until whistles appear, hold each briefly
4. Pick Standard + Adaptive, or switch to AI for voice-first suppression
5. Optional: enable Sidechain and route playback to Bus 2 (see Quick Start)
IDEAL FOR
• Live vocals and speech
• Rehearsals, worship, small PA setups
• Mobile recording rigs on iPhone and iPad
• Any situation where monitor feedback is a risk
COMPATIBILITY
• Audio Unit v3 (aufx) effect
• iPhone and iPad
• Works in any AUv3-compatible host
• Mono or stereo, sample rates from 8 kHz to 192 kHz
FeedbackGuard — Adaptive Feedback Suppressor by Norwin Palme.
Beoordelingen en recensies
- Deze app heeft niet genoeg beoordelingen of recensies ontvangen voor een overzicht.
AI mode keeps the voice clear while ducking howls, room, noise, and bleed.
• AI mode with 0 ms or ~11 ms latency and Strength control
• Sidechain / reference masking (Bus 2 or Main L/R) with connection status
• Hold a preset to save, overwrite, rename, or delete
• Lighter DSP load and faster detection path
De ontwikkelaar, Norwin Palme, heeft aangegeven dat volgens het privacybeleid van de app gegevens kunnen worden beheerd zoals hieronder beschreven. Ga voor meer informatie naar het privacybeleid van de ontwikkelaar .
Er worden geen gegevens verzameld
De ontwikkelaar verzamelt geen gegevens van deze app.
Toegankelijkheid
De ontwikkelaar heeft nog niet aangegeven welke toegankelijkheidsfuncties deze app ondersteunt. Lees meer
Informatie
- Grootte
- 4 MB
- Categorie
- Muziek
- Compatibiliteit
Vereist iOS 17.0 of nieuwer.
- iPhone
Vereist iOS 17.0 of nieuwer. - iPad
Vereist iPadOS 17.0 of nieuwer. - Mac
Vereist een Mac met macOS 14.0 of nieuwer én Apple M1-chip of nieuwer.
- iPhone
- Talen
- Engels
- Leeftijd
4+
- 4+
- Provider
Norwin Palme
- Norwin Palme heeft zichzelf geïdentificeerd als een handelaar van deze app en heeft bevestigd dat dit product of deze dienst voldoet aan de wetgeving van de Europese Unie.
- Adres
Schernthonstr 2
5321 Koppl
Oostenrijk - Telefoonnummer
+43 6506805060 - E-mailadres
lipsync@audioimpact.at
- Copyright
- © 2026 Norwin Palme

