SmartSDR™ - FlexRadio Systems® 17+
Marcus Roskosch
-
- € 5,99
- Biedt in‑app aankopen
Schermafbeeldingen
Beschrijving
Official FlexRadio Systems® Client
SmartSDR is a full featured radio client that enables your iPad or iPhone to operate your FlexRadio device.
It is fully compatible to SmartSDR v1, v2 (including SmartLink) and v3 (including MultiFlex and SmartControl).
Please note: This App requires a FlexRadio Systems® Series-6000 Software Defined Radio (SDR) Device.
FACTS AND FEATURES:
SmartSDR offers almost all features of SmartSDR for Windows such as:
■ Supports FT8 and FT4 (iPad and iPhone Max, Firmware 2 required)
■ Included CW Decoder and keyer
■ Creation, maintenance of Slices, TNFs, Filters
■ Unlimited number of Slices, Panadapters (limited only by radio model)
■ CWX support including Sidetone and live send mode
■ Software Paddle or Straight-Key support
■ Maintain all Radio, Slice and Panadapter settings
■ Support for Memories
■ Profiles integration (TX, Microphone and Global)
■ Audio settings supported including equalizers
■ Support for TX Settings like Power including all Tuning features
■ Transverter support
■ SmartLink™ remote access
■ MultiFlex™ support
■ SmartControl support
■ HomeKit support to control radio, antenna switches etc. remotely
■ Direct support for Power Genius XL (PGXL), Tuner Genius (TGXL), Antenna Genius (AGXL) and Rotator Genius (RGXL) local and remote
For HomeKit, you can use any Power Plug or Switch that are HomeKit compatible.
In addition to SmartSDR for Windows, this App offers these features:
■ Band limits and Band maps and modes will be displayed inside the Pan adapter (In-App Purchase)
■ DX Cluster support which displays spots directly inside the Pan adapter (In-App Purchase)
■ Graphical tuning knob for easy and exact frequency selection.
■ Various additional minor bells and whistles such as easy TNF maintenance,
■ Direct Bandwidth selection, Split Mode, instant Memory creation and more.
■ Device logging and device parameter monitoring (e.g. PA Temperature etc.)
■ Logbook integration with ADIF Im- and Export (In-App Purchase)
■ Support for two Bluetooth and USB Controllers (In-App Purchase)
■ Voice Macro recording and playback
There are just a few limitations compared to SmartSDR for Windows which are:
- Only one Panadapter visible at the same time.
- Diversity is not implemented.
WHAT YOU NEED:
- A FlexRadio Systems® FLEX-6000 series radio
- An iPhone or iPad that runs at least iOS 16
NETWORK REQUIREMENTS:
To run this App at your home, nothing else but a regular WiFi connection is needed that can access your FLEX-6000. You can immediately start using the App.
For Remote operation via SmartLink™ a Version 2 License is required for your Radio.
The App supports Splitscreen Multitasking on the newer iPads so you can run SmartSDR in split mode parallel to your browser, Email software or any other App.
SUPPORTED SDR HARDWARE:
FLEX-6300, FLEX-6400, FLEX-6400M, FLEX-6500, FLEX-6600, FLEX-6600M, FLEX-6700
Find out more here: http://go-to.me/smartsdr
Read the Manual: http://go-to.me/smartsdr-manual
Nieuw
Versie 6.9.32
This update contains the following changes and improvements:
◉ An issue with some cut screens on iPhones has been fixed
◉ A new Tool CTR2 Controller has been added which supports Lynovation CTR2-MIDI Controller for wireless or wired Radio control and CW Keyer connection
NOTE: Details to the CTR2 Controller can be found in the App manual
◉ Support for Antenna Genius 8x1 added
◉ The Genius Tools are now also available for iPhone Max devices
◉ An issue of the FT8 tool when answering or using call signs with prefix was fixed
◉ The FT8 Map view will now be updated with new FT8 messages
◉ An issue was fixed that CW Macros were not send using a MIDI Controller
◉ MultiFlex can now be enabled or disabled under Radio Settings
◉ Some further accessibility improvements
◉ It is now possible to use Macro Variables such as {UTC} for Contest RST generation. This is useful for BARTG contests where the UTC time need do be added to the exchange
◉ Implemented several additional improvements and optimizations behind the scenes
Kindly use the 'CONTACT DEVELOPER' feature within the app for any issue reports. I will ensure it is promptly resolved.
Your continued support and valuable feedback play a crucial role in further improving this app.
73s,
Marcus, DL8MRE
Beoordelingen en recensies
Perfect
Works perfect with my iphone6 and my IPads.
Robert PA5A
not working
i keep hearing the same station....if you dont get the pay version
Reactie van ontwikkelaar ,
There is not much more I can do than explaining clearly on the App Store that one needs to have a FlexRadio device in order to use this App.
App-privacy
De ontwikkelaar, Marcus Roskosch, heeft aangegeven dat volgens de toepassing van het privacybeleid van de app gegevens kunnen worden beheerd zoals hieronder staat beschreven. Ga voor meer informatie naar het privacybeleid van de ontwikkelaar.
Er worden geen gegevens verzameld
De ontwikkelaar verzamelt geen gegevens van deze app.
Toepassing van het privacybeleid kan variëren op basis van bijvoorbeeld de functies die je gebruikt of je leeftijd. Lees meer
Informatie
- Provider
-
Marcus Roskosch heeft zichzelf geïdentificeerd als een handelaar van deze app en heeft bevestigd dat dit product of deze dienst voldoet aan de wetgeving van de Europese Unie.
- Adres
- Marcus & Jan Roskosch GbR Kaldemorgenweg 35 45276 Essen Duitsland
- Telefoonnummer
- +49 2019595630
- E-mailadres
- marcus.roskosch@ham-radio-apps.com
- Grootte
- 57,6 MB
- Categorie
- Diensten
- Compatibiliteit
-
- iPhone
- Vereist iOS 16.1 of nieuwer.
- iPad
- Vereist iPadOS 16.1 of nieuwer.
- Talen
-
Engels
- Leeftijd
- 17+ Onbeperkte webtoegang
- Copyright
- © Marcus Roskosch
- Prijs
- € 5,99
- In-app aankopen
-
- FlexRadio Device access € 69,99
- DX-Cluster € 6,99
- Logbook Add-on € 6,99
- Region 1,2 and 3 Band Plan € 0,00
- FT8 € 22,99
- Griffin PowerMate BT Controller support € 6,99
- 4O3A Genius Device support € 9,99
- Voice Macros € 6,99
- MidiController support € 6,99
- Flic 2 Button support € 6,99
Ondersteunt
-
Delen met gezin
Sommige in-app aankopen, waaronder abonnementen, kunnen mogelijk deelbaar zijn met je gezinsgroep wanneer Delen met gezin is ingeschakeld.