PCBPad is a circuit board editor built for Apple Pencil. You route copper by drawing it: the stroke you make becomes a clean track, and the board makes room for it. It runs natively on iPad and Mac, works fully offline, and needs no account.
ROUTE WITH APPLE PENCIL
• Draw from pad to pad: the stroke becomes a copper track with 45° corners, snapped to the grid, and it ends up where your hand went.
• Tracks in the way move aside (push and shove). Copper that cannot move is routed around.
• The clean-up is checked against pads, holes and keepouts. If the track still touches one, the app tells you which.
• One stroke draws a differential pair. A serpentine adds the length a pair is missing.
• No Apple Pencil? One finger draws and two fingers navigate. On Mac, drag to draw.
• Two-finger tap undoes, three-finger tap redoes, hold one finger for the radial menu.
PRIVATE BY DESIGN
• No account, no login, no server, no analytics, no ads.
• Your boards stay on your device, or wherever you keep them in the Files app. PCBPad never uploads them.
OPENS AND SAVES KICAD FILES
• PCBPad opens and saves .kicad_pcb and .kicad_sch files directly. There is no import step and no conversion.
• Only the bytes you change are rewritten. The file goes back to KiCad as it was, plus your edits.
• Tested on real projects, including the KiCad 10 file format.
START A BOARD HERE
• Draw the board outline, then correct it with numbers. Constrain a sketch, or import an outline from DXF.
• 1,901 footprints and 15,123 symbols from the official libraries, bundled and available offline.
• Tap two pads to declare a net. The ratsnest shows what is left to connect.
• Copper planes with a real fill, via stitching, keepouts, blind and buried vias.
• Text, logos and dimensions on the silkscreen.
• A footprint editor for the part that no library has.
SCHEMATIC
• Place parts, wire them, move them: wires stay attached.
• Multi-unit parts, hierarchical sheets, and a symbol editor.
• Compare the schematic with the board and apply the differences after a preview.
CHECK BEFORE YOU ORDER
• Design rules written as formulas: clearance, track width, annular ring, hole-to-hole, unconnected nets.
• Limits taken from the published capabilities of three board fabricators, with the source and the date they were read.
• See what changed between two versions of the same board.
SEE IT, THEN MAKE IT
• A 3D view of the board, with component bodies sized from their package names.
• Gerber X2 with a job file, Excellon drill, bill of materials and pick-and-place, in one ZIP.
• The package is read back and shown layer by layer before you send it.
• STEP and STL for your enclosure, and panels of several boards.
In English and Italian. Requires iPadOS 18 or later, or a Mac with Apple silicon.
KiCad is a trademark of the Linux Foundation. PCBPad is an independent app. It is not made by, endorsed by or affiliated with the KiCad project.
Questions and bug reports: pcbpad.app@gmail.com
Ratings & Reviews
This app has not received enough ratings or reviews to display an overview.
THE SCHEMATIC CHECKS ITSELF
• No-connect flags are read and written, with a new tool to place them.
• Electrical rules check: unconnected pins, undriven power, output conflicts, missing footprints and duplicate references, right in the rules sheet.
• Start a new board from one of ten KiCad project templates.
• Opening a .kicad_pro or .kicad_sch now brings the schematic along.
• Two new lessons: "From a blank sheet", a schematic drawn from nothing and checked, and "Find the five mistakes", a routed board broken five times for you to fix.
Version 1.9
The developer, Lorenzo Dard, indicated that the app’s privacy practices may include handling of data as described below. For more information, see the developer’s privacy policy .
Data Not Collected
The developer does not collect any data from this app.
Privacy practices may vary based, for example, on the features you use or your age. Learn More
Accessibility
The developer has not yet indicated which accessibility features this app supports. Learn More
Information
Provider
Lorenzo Dard
Size
185.3 MB
Category
Developer Tools
Compatibility
Requires iPadOS 18.0 or later.
iPad Requires iPadOS 18.0 or later.
Mac Requires macOS 15.0 or later and a Mac with Apple M1 chip or later.