Timecode Tool App
Música
1,99 € · Desenvolvida para iPad. Não verificada para macOS.
Timecode Tool is a focused utility for live-show technicians who need to generate, monitor, convert, measure or calculate SMPTE timecode on iPad, iPhone, and Apple Silicon Mac.
Five tools:
GENERATE
• Output LTC audio and Art-Net Timecode driven by system time-of-day, a free-running 1-hour block, or a custom Start Timecode you type in (e.g. 02:03:20:15) that free-runs from that point.
• A media-player transport while running — previous block, back to start of block, play/pause, next block. (Hidden for time-of-day, which follows the wall clock instead of a block you can skip through.)
• Pick FPS (24, 25, 29.97 NDF, 29.97 DF, 30) including correct SMPTE drop-frame counting.
• Send to a specific Art-Net destination IP (unicast or broadcast).
MONITOR
• A large, glanceable timecode readout for monitoring.
• Choose the source: decode LTC from an audio input, or receive Art-Net Timecode over the network. Frame rate and lock state are shown live.
CONVERT
• Route one timecode input to up to two simultaneous outputs, freely chosen: input is LTC audio, Art-Net, or MTC; each output is LTC audio, Art-Net, or MTC.
• MTC: Timecode Tool publishes a virtual MIDI port, "Timecode Tool", that shows up as a MIDI input in every other app on your device — your DAW can chase it with no cable or MIDI interface. Output can also go to a real MIDI destination, and input can come from any MIDI source.
• Warns up front about setups that would misbehave: Art-Net in and out sharing a UDP port, LTC in and out on the built-in speaker and mic, and MTC feeding back into itself.
• Latency compensation per output, with drift tracking and a re-sync control. Auto-detects the source frame rate and the drop-frame flag, with an override for 29.97 non-drop versus 30 fps.
MEASURE
• A delay checker. Tap the pad twice — or keep tapping along to a beat — and read the interval in milliseconds, frames at the rate you choose, timecode, BPM, seconds, or audio samples.
• Then hear it: two clicks exactly that far apart, a click every interval, or your own taps replayed, placed on the audio clock to the sample.
• A tap far from the others — a double tap, a missed beat — is flagged as it lands and left out of the statistics. Save a measurement with its taps, rate and statistic, and bring it back later.
• Last, average, min, max and jitter at a glance; every unit has Copy.
CALCULATE
• A timecode calculator. Add, subtract, multiply and divide timecode, frames, seconds, milliseconds and h:mm:ss clock time in any mix — for example "01:03:40:15, one minute thirty-five later".
• Pick each operand's unit on a sliding switch under the field. Shorthand accepted: 95s, 1500ms, 1m35s, 40f, or just digits into a timecode field. Paste into any field; the unit follows the text.
• A sentence above the result says what was done — "Added 1 min 35 s to timecode 01:03:40:15" — and the result appears in every form at once, each with its own Copy, chaining back into the next calculation. Drop-frame arithmetic uses the same frame counting as the generator.
• Measure and Calculate also work at 59.94 and 60 fps.
Cross-cutting features:
• Background audio — keeps generating / decoding when the screen is locked or another app is foreground.
• Phone calls and Siri don't break the timecode stream; it resumes.
• Shows your device's IP addresses. Works with Class-Compliant USB audio interfaces.
Available in English, Japanese, Korean, Simplified Chinese, French and German.
Timecode Tool does not collect, store, or transmit any personal data.
Classificações e críticas
- Esta aplicação não recebeu classificações ou críticas suficientes para apresentar uma descrição geral.
• New: Measure — a tap delay checker. Tap twice and read the interval in milliseconds, frames, timecode, BPM, seconds or samples, then hear it back as two sample-accurate clicks, a click loop, or your taps replayed. A tap far from the rest is flagged as it lands and left out of the statistics; measurements can be saved and brought back later.
• New: Calculate — a timecode calculator. Add, subtract, scale and divide timecode, frames, seconds, milliseconds and clock time in any mix, with the unit chosen on a sliding switch under each field. A sentence above the result says what was done; the result shows in every form with Copy, and any field takes a paste.
• 59.94 and 60 fps in Measure and Calculate.
• The app now speaks Japanese, Korean, Simplified Chinese, French and German as well as English.
O programador, llcheesell Inc., indicou que as práticas de privacidade da app podem incluir o tratamento de dados conforme descrito abaixo. Encontrará mais informação na política de privacidade do programador .
Dados não recolhidos
O programador não recolhe quaisquer dados desta app.
Acessibilidade
O programador ainda não indicou quais as funcionalidades de acessibilidade suportadas por esta app. Saiba mais
Informação
- Tamanho
- 3,6 MB
- Categoria
- Música
- Compatibilidade
Requer o iOS 17.0 ou posterior.
- iPhone
Requer o iOS 17.0 ou posterior. - iPad
Requer o iPadOS 17.0 ou posterior. - Mac
Requer o macOS 14.0 ou posterior e o processador M1 da Apple ou posterior. - Apple Vision
Requer o visionOS 1.0 ou posterior.
- iPhone
- Idiomas
Alemão e mais 5
- Alemão, Chinês simplificado, Coreano, Francês, Inglês, Japonês
- Idade
4+
- 4+
- Fornecedor
llcheesell Inc.
- llcheesell Inc. identificou-se como comerciante desta app e confirmou que este produto ou serviço está em conformidade com a legislação da União Europeia.
- Número DUNS
498210839 - Endereço
〒160-0023
Tokyo SHINJUKU-KU 6-15-1-2503, NISHISHINJUKU
Japão - Número de telefone
+81 5068634735 - E-mail
support@llcheesell.com
- Copyright
- © llcheesell Inc.

