* improved algorithm for searching for free polyphony channels in synths and samplers: if an empty channel can't be found, a search is performed for a channel with a released note (the NoteOFF command is processed, but the tail of the voice is still playing); * Sampler: new Attack and Release controllers; both parameters only work when the volume envelope is enabled (in the sample editor); values: 0 - instant; 32768 - infinite; approximate length in ticks = log(1/100) / log(value/32768); * LFO: additional frequency units: semitone, semitone/100; * LFO: new controllers: Transpose, Finetune; * now an empty selection in the pattern editor is equivalent to one selected event under the current cursor position; * bug fixes.

* Analog Generator: new option "Always play Osc2" (play additional oscillator even if Osc2=0); * Modulator: Max PM (Phase Modulation) delay: added values 8, 16, 32 sec; * Modulator: new controller "PM interpolation"; * MetaModule: new buttons in the user defined controller editor: "]+" (add after); "+[" (add before); * Sampler: the new "Reverse" controller lets you play a sample backwards; limitation: if a loop is enabled, the playback position immediately jumps inside the loop in reverse mode; * export to audio: new option "Seamless Loop" (the tail from the end of the project will be mixed into the beginning of the file); * controller properties: added a "Write all to pattern" button; * controller properties: now there are separate input fields for decimal and hexadecimal values; * new buttons in the pattern icon editor: INV (invert colors), New (generate a new icon), Copy, Paste; * text selection in input fields (currently only for devices with a physical keyboard); available shortcuts: SHIFT+ARROWS; SHIFT+INS/DEL; CTRL+A/X/C/V; * prefixes in text input fields for conversion from one number system to another: 0xVALUE - from hexadecimal to decimal; 0tVALUE - from decimal to hexadecimal; * new keyboard shortcut (unassigned by default) for the module editor: Write the values of all controllers of the selected module to the current pattern; * now, in addition to the standard set of buttons, you can add any keyboard shortcuts to each toolbar; details: https://warmplace.ru/soft/sunvox/manual.php#toolbars * bug fixes.

bug fixes

bug fixes

* new module Smooth - it attempts to follow the waveform of the incoming signal, smoothing out sharp changes in accordance with the Rise and Fall parameters; * new modulation types in FMX and Analog Generator (Osc2 modes): min abs, max abs; * Modulator: additional modulation types (as in FMX and Analog Generator) have been added; * MetaModule: new options: (see simple_examples/metamodule options 78,79.sunvox) - 79 - ignore effect 31 (jump to line XXYY) after the last Note OFF; works only if "Play patterns" >= 3; - 78 - jump to the "RL" pattern after the last Note OFF; works only if "Play patterns" >= 3; * LFO: improved quality of waveforms "saw", "triangle" and "random interpolated" (26 bits instead of 15); * Filter Pro: max value of the Roll-off controller has been raised to 96dB; * Filter Pro: since version 2.1.2 the Roll-off controller also affects the All-pass filter type; see simple_examples/freq dispersion.sunvox; * Reverb: improved type of all-pass filter has been added to controller 8 - it has almost no effect on the gain of the original signal frequencies; * Delay: new controller "Negative feedback" for changing the sign of feedback; * Delay: new controller "All-pass filter" for switching the module to All-pass mode, where the filter order is the delay length in samples; * Glide: new controllers "Octave", "Frequency multiply" and "Frequency divide"; * MultiCtl: new button "Set" for precise curve modification; * MultiCtl: new button "+" (next to the controller number) - press it if you want to change multiple controllers within a single module; see simple_examples/multictl.sunvox; * Pitch Detector: new algorithm - "spectral peak"; it determines the frequency of the loudest harmonic with high accuracy; suitable for signals with pronounced fundamental harmonic; * Pitch Detector: additional info under the controllers: incoming signal frequency; frequency range; output note frequency; * Pitch Detector: the maximum detected frequencies for algorithms 1 and 2 are 2000 Hz and 1000 Hz; but these values will double if the following conditions are met: base version >= 2.1.2; LP filter == 0; Alg1-2 Sample rate >= 44100; * Sampler: new controller "Record" (stop/pause/start recording); see simple_examples/sampler rec automation.sunvox; * sample editor: new function "Set the start position" (position at which the sample will start playing); * sample editor: new function "Adjust to specified length (without resampling)" (editor menu -> Misc) - allows you to set a note at which the sample will fit exactly into the specified length; * sample editor: new functions "Convert to 8/16/32bit" (editor menu -> Misc); * sample editor: view settings (in the menu) allow you to set the units (samples, seconds, ticks, etc.) in which the cursor position and selection size will be displayed; * sample editor: PLAY (from the cursor position) button has been added; * sample editor: improved sample wave display; * sample editor: the following parameters have been added to the "Create a new sample" and "Resample" dialogs: interpolation type; length in lines and seconds; "Just crop/extend (no resampling)" option; * pattern effect 34: new option 8 has been added - enable it if you need to output 7-bit MIDI controller values, even if the controller is 14-bit (0-31); * new keyboard shortcuts; * new modules and examples; * full SunVox Library sources are now available, so you can rebuild it (for different platform or with different options) if necessary: https://warmplace.ru/soft/sunvox/sunvox_lib.php * minor improvements, bug fixes, increased stability.

* Sampler: new controller "Tick length" (affects the duration of the envelopes); * new example: NightRadio - Frozen; * bug fixes.

fixed bug with saving OGG sample

* iOS 11 support has been dropped; now the minimum is 12; * now you can also load samples in the following formats (on ALL platforms): 64-bit WAV/AIFF, OGG (Vorbis), MP3, FLAC; * export to FLAC and OGG (Vorbis); * Modulator: the accuracy of the phase modulation mode has been increased (but only if the version of SunVox 2.1.1 (and higher) is specified in the project properties); * Modulator: new controller "Max phase modulation delay"; * Vorbis player: new controller "Ignore Note OFF" (play every note endlessly); * MetaModule: new option "Auto BPM/TPL" (synchronize BPM and TPL of the module with BPM and TPL of the parent project); * Pattern Editor: new function "Sync with timeline" - sync the cursor with the timeline (+shortcut, unassigned by default); * Timeline: new function "Sync with pat.editor" - sync the cursor with the pattern editor (+shortcut, unassigned by default); * sample editor: new function "Mono to stereo" (editor menu -> Misc); * auto-repeat in the virtual (on-screen) text keyboard; * new modules and examples; * bug fixes.

v2.1c: bug fixes. v2.1b: * Loop: new controller "On NoteON" (restart with transition to zero iteration (record);restart current iteration); see simple_examples/loop4.sunvox; * bug fixes. v2.1: * now the interface is displayed in high resolution; if you want to switch back to the normal low resolution mode (on some devices this will increase the FPS) - go to the Preferences -> Interface -> Low resolution; * Preferences -> Audio -> Additional options: new option "minimize the amount of system-supplied signal processing" (measurement mode); * high resolution icons; * high resolution fonts with fractional scaling; you can disable these features in Preferences -> Interface -> Fonts; * sound engine optimization; * Distortion: new type "saturation" (adding odd harmonics) + five of its variations; * MultiSynth: new option "Output port number = random" (three different algorithms are available); * Loop: new controller "Length unit" (line/128;line;line/2;line/3;tick;ms;Hz); * Loop: new controller "Maximum buffer size" (in seconds) to protect against allocating too much memory; * Loop: the maximum of the "Repeat" controller has been increased to 128 (128 = repeat endlessly); * new curve types for ADSR and FMX modules: rect; smooth rect; 2-bit (linear); 3-bit; 4-bit; 5-bit; * module editor menu: new function "Mute/Solo buttons" to show/hide the Bypass/Mute/Solo buttons under each module; * musical keyboard: the new panel with additional functions and settings; to open it - increase the height of the keyboard and press the appeared "+" button; * musical keyboard settings: type (classic, uniform, free (any frequency)), number of rows, key width, color inversion, autorepeat; * new way to edit a pattern - drawing with a brush; go the pattern editor menu and select "Draw" - this will open the pattern drawing tools; * for a more detailed description of working with a brush, see https://warmplace.ru/soft/sunvox/manual.php#pdraw * new features in the pattern editor menu: Copy to brush; Reverse; Draw (open pattern drawing tools); * Preferences -> Timeline: new option "Hexadecimal track numbers"; * Preferences -> Toolbars: the buttons on the horizontal dividers can be customized here; see https://warmplace.ru/soft/sunvox/manual.php#toolbars * pattern editor menu -> Remap: module number -1 = all modules; * more detailed pattern names after the live recording; * new pattern effect (column EE): 35 - bind MIDI OUT message XX (0 - Program Change; 1 - Channel Pressure; 2 - Pitch Bend Change) to controller YY (0 - OFF; 0x80 - MIDI controller 0; 0x81 - MIDI controller 1...); for the specified module only; * new special pattern command: "XX" - stop the module, clear its internal buffers and put it into standby mode; * new keyboard shortcuts (unassigned by default) that open the corresponding tool windows in the pattern editor: * interpolate; * transpose; * cyclic shift; * set effect; * draw; * new keyboard shortcuts (unassigned by default) for the pattern editor: * clear pattern; * shrink pattern /2; * expand pattern *2; * slice by cursor; * reverse; * pattern properties; * show/hide CCEEXXYY columns; * scale; * insert a special command "Stop the Module" (XX); * new keyboard shortcuts for working with the brush: * CTRL+E - play current note (in the pattern editor) and copy it to the brush; * CTRL+L - play the notes of the current line (in the pattern editor) and copy it to the brush; * play the 1st line of the brush (unassigned by default); * сopy selected area of the pattern to the brush (unassigned by default); * CTRL+G - paste from the brush; * new modules in the instruments/ and effects/ folders; * new examples: * SunVox Compo 2022.02 winners: fuzion_mixer & Logickin - Synthonic Voyage, RobloxFan75000 - Hypermatic, PhilipBergwerf - We want Peace; * NightRadio - Cycles of Light; * updated version of SunVox library for developers: https://warmplace.ru/soft/sunvox/sunvox_lib.php * bug fixes.

v2.1b: * Loop: new controller "On NoteON" (restart with transition to zero iteration (record);restart current iteration); see simple_examples/loop4.sunvox; * bug fixes. v2.1: * now the interface is displayed in high resolution; if you want to switch back to the normal low resolution mode (on some devices this will increase the FPS) - go to the Preferences -> Interface -> Low resolution; * Preferences -> Audio -> Additional options: new option "minimize the amount of system-supplied signal processing" (measurement mode); * high resolution icons; * high resolution fonts with fractional scaling; you can disable these features in Preferences -> Interface -> Fonts; * sound engine optimization; * Distortion: new type "saturation" (adding odd harmonics) + five of its variations; * MultiSynth: new option "Output port number = random" (three different algorithms are available); * Loop: new controller "Length unit" (line/128;line;line/2;line/3;tick;ms;Hz); * Loop: new controller "Maximum buffer size" (in seconds) to protect against allocating too much memory; * Loop: the maximum of the "Repeat" controller has been increased to 128 (128 = repeat endlessly); * new curve types for ADSR and FMX modules: rect; smooth rect; 2-bit (linear); 3-bit; 4-bit; 5-bit; * module editor menu: new function "Mute/Solo buttons" to show/hide the Bypass/Mute/Solo buttons under each module; * musical keyboard: the new panel with additional functions and settings; to open it - increase the height of the keyboard and press the appeared "+" button; * musical keyboard settings: type (classic, uniform, free (any frequency)), number of rows, key width, color inversion, autorepeat; * new way to edit a pattern - drawing with a brush; go the pattern editor menu and select "Draw" - this will open the pattern drawing tools; * for a more detailed description of working with a brush, see https://warmplace.ru/soft/sunvox/manual.php#pdraw * new features in the pattern editor menu: Copy to brush; Reverse; Draw (open pattern drawing tools); * Preferences -> Timeline: new option "Hexadecimal track numbers"; * Preferences -> Toolbars: the buttons on the horizontal dividers can be customized here; see https://warmplace.ru/soft/sunvox/manual.php#toolbars * pattern editor menu -> Remap: module number -1 = all modules; * more detailed pattern names after the live recording; * new pattern effect (column EE): 35 - bind MIDI OUT message XX (0 - Program Change; 1 - Channel Pressure; 2 - Pitch Bend Change) to controller YY (0 - OFF; 0x80 - MIDI controller 0; 0x81 - MIDI controller 1...); for the specified module only; * new special pattern command: "XX" - stop the module, clear its internal buffers and put it into standby mode; * new keyboard shortcuts (unassigned by default) that open the corresponding tool windows in the pattern editor: * interpolate; * transpose; * cyclic shift; * set effect; * draw; * new keyboard shortcuts (unassigned by default) for the pattern editor: * clear pattern; * shrink pattern /2; * expand pattern *2; * slice by cursor; * reverse; * pattern properties; * show/hide CCEEXXYY columns; * scale; * insert a special command "Stop the Module" (XX); * new keyboard shortcuts for working with the brush: * CTRL+E - play current note (in the pattern editor) and copy it to the brush; * CTRL+L - play the notes of the current line (in the pattern editor) and copy it to the brush; * play the 1st line of the brush (unassigned by default); * сopy selected area of the pattern to the brush (unassigned by default); * CTRL+G - paste from the brush; * new modules in the instruments/ and effects/ folders; * new examples: * SunVox Compo 2022.02 winners: fuzion_mixer & Logickin - Synthonic Voyage, RobloxFan75000 - Hypermatic, PhilipBergwerf - We want Peace; * NightRadio - Cycles of Light; * updated version of SunVox library for developers: https://warmplace.ru/soft/sunvox/sunvox_lib.php * bug fixes.

* now the interface is displayed in high resolution; if you want to switch back to the normal low resolution mode (on some devices this will increase the FPS) - go to the Preferences -> Interface -> Low resolution; * Preferences -> Audio -> Additional options: new option "minimize the amount of system-supplied signal processing" (measurement mode); * high resolution icons; * high resolution fonts with fractional scaling; you can disable these features in Preferences -> Interface -> Fonts; * sound engine optimization; * Distortion: new type "saturation" (adding odd harmonics) + five of its variations; * MultiSynth: new option "Output port number = random" (three different algorithms are available); * Loop: new controller "Length unit" (line/128;line;line/2;line/3;tick;ms;Hz); * Loop: new controller "Maximum buffer size" (in seconds) to protect against allocating too much memory; * Loop: the maximum of the "Repeat" controller has been increased to 128 (128 = repeat endlessly); * new curve types for ADSR and FMX modules: rect; smooth rect; 2-bit (linear); 3-bit; 4-bit; 5-bit; * module editor menu: new function "Mute/Solo buttons" to show/hide the Bypass/Mute/Solo buttons under each module; * musical keyboard: the new panel with additional functions and settings; to open it - increase the height of the keyboard and press the appeared "+" button; * musical keyboard settings: type (classic, uniform, free (any frequency)), number of rows, key width, color inversion, autorepeat; * new way to edit a pattern - drawing with a brush; go the pattern editor menu and select "Draw" - this will open the pattern drawing tools; * for a more detailed description of working with a brush, see https://warmplace.ru/soft/sunvox/manual.php#pdraw * new features in the pattern editor menu: Copy to brush; Reverse; Draw (open pattern drawing tools); * Preferences -> Timeline: new option "Hexadecimal track numbers"; * Preferences -> Toolbars: the buttons on the horizontal dividers can be customized here; see https://warmplace.ru/soft/sunvox/manual.php#toolbars * pattern editor menu -> Remap: module number -1 = all modules; * more detailed pattern names after the live recording; * new pattern effect (column EE): 35 - bind MIDI OUT message XX (0 - Program Change; 1 - Channel Pressure; 2 - Pitch Bend Change) to controller YY (0 - OFF; 0x80 - MIDI controller 0; 0x81 - MIDI controller 1...); for the specified module only; * new special pattern command: "XX" - stop the module, clear its internal buffers and put it into standby mode; * new keyboard shortcuts (unassigned by default) that open the corresponding tool windows in the pattern editor: * interpolate; * transpose; * cyclic shift; * set effect; * draw; * new keyboard shortcuts (unassigned by default) for the pattern editor: * clear pattern; * shrink pattern /2; * expand pattern *2; * slice by cursor; * reverse; * pattern properties; * show/hide CCEEXXYY columns; * scale; * insert a special command "Stop the Module" (XX); * new keyboard shortcuts for working with the brush: * CTRL+E - play current note (in the pattern editor) and copy it to the brush; * CTRL+L - play the notes of the current line (in the pattern editor) and copy it to the brush; * play the 1st line of the brush (unassigned by default); * сopy selected area of the pattern to the brush (unassigned by default); * CTRL+G - paste from the brush; * new modules in the instruments/ and effects/ folders; * new examples: * SunVox Compo 2022.02 winners: fuzion_mixer & Logickin - Synthonic Voyage, RobloxFan75000 - Hypermatic, PhilipBergwerf - We want Peace; * NightRadio - Cycles of Light; * updated version of SunVox library for developers: https://warmplace.ru/soft/sunvox/sunvox_lib.php * bug fixes.

2.0e: bug fixes. 2.0: * iOS 11+: SunVox Audio Unit (AUv3) can now send MIDI notes and MIDI CC to other AU modules; * iOS 13.4+: full USB/Bluetooth keyboard support (like on desktops); * multiple module selection + ability to save several selected modules to a sunvox file; * timeline: supertracks (see simple_examples/supertracks.sunvox); * improved import of old tracker formats (XM and MOD); * new module - FMX: 5-operator Frequency Modulation synth; * new module - FFT frequency transformator; * timeline menu: new option "Vertical mode"; * timeline menu: new functions "Load" and "Save" to load/save selected patterns from/to a sunvox file; * timeline menu: new function "Detach" to convert the clones to the normal patterns; * module editor menu: new function "Detach" to detach the selected modules from the rest; * module editor menu: new function "Make MetaModule" for packing the selected modules into a single MetaModule; * now it is possible to delete modules, but keep the links; * pattern properties: X and Y fields - exact coordinates of the pattern on the timeline; * module properties: X and Y fields - exact coordinates of the module; * module visualizer: "Phase Sync" oscilloscope option has been added; activate it to see a single waveform cycle; * module visualizer: new buttons "reset", "apply", "copy", "paste"; * ADSR->Sustain: new value "Repeat" (repeat the envelope until the module is stopped); * ADSR->Smooth Transitions: new value "volume change" (the volume will change smoothly, but the envelope start is not smoothed); * Amplifier: new controller "Bipolar DC Offset"; * Analog Generator: the "Freq2" controller has been ranamed to "Osc2" (pitch deviation of the additional oscillator); * Analog Generator: new controller "Osc2 volume" - additional oscillator volume; * Analog Generator: new controller "Osc2 mode" - mixing mode of the additional oscillator with the main one (add;sub;mul;min;max;bitwise AND;bitwise XOR); * Analog Generator: new controller "Osc2 phase" - starting phase of the additional oscillator; * Analog Generator: new option "Increased frequency computation accuracy"; * Delay: new controller "Delay multiplier"; * Delay: new "Delay unit" values: sec/44100, sec/48000, sample; * Delay: max delay length has been increased to 60 sec; * Delay: new controller "Feedback" (for sound and events); * Echo: new controller "Right channel offset" (how much to shift the right channel relative to the left in time); * Echo: new controller "Filter"; * Echo: new controller "Filter frequency"; * Filter Pro: new modes "stereo + smoothing" and "mono + smoothing" for additional parameter smoothing; * Filter Pro: new types "LP 6dB" and "HP 6dB"; * LFO: new controller "Sine quality"; * MetaModule->Play patterns: new values "on (repeat, endless)" and "on (no repeat, endless)"; * MetaModule: number of user defined controllers has been increased to 96; * MetaModule: controller color can now be changed by adding "@X" to the beginning of the name, where X is the group number from 0 to F; * MultiSynth: new option "Output port number = round-robin (cyclic)"; * Sampler: new option "Increased frequency computation accuracy"; * new pattern effects (column EE): * 1A - fine velocity slide up/down (XX - up speed; YY - down speed); once at the beginning of a line; * 33 - slot sync (for sv_sync_resume() in SunVox library); * 34 - set (XX) or reset (YY) project options: 1 - no portamento on the first tick; 2 - no velocity slide on the first tick; (for compatibility with old tracker formats); * 3C - copy track XX from from the pattern YY; for example, if XXYY = 0023, then the first track will be copied from the pattern named "23"; * 3D - write a random value to track YY; min value, max value and column must be in track 0, starting from line XX; see example "pat effect 3D random value"; * new examples and modules. See the full changelog on the site...

2.0d: bug fixes. 2.0: * iOS 11+: SunVox Audio Unit (AUv3) can now send MIDI notes and MIDI CC to other AU modules; * iOS 13.4+: full USB/Bluetooth keyboard support (like on desktops); * multiple module selection + ability to save several selected modules to a sunvox file; * timeline: supertracks (see simple_examples/supertracks.sunvox); * improved import of old tracker formats (XM and MOD); * new module - FMX: 5-operator Frequency Modulation synth; * new module - FFT frequency transformator; * timeline menu: new option "Vertical mode"; * timeline menu: new functions "Load" and "Save" to load/save selected patterns from/to a sunvox file; * timeline menu: new function "Detach" to convert the clones to the normal patterns; * module editor menu: new function "Detach" to detach the selected modules from the rest; * module editor menu: new function "Make MetaModule" for packing the selected modules into a single MetaModule; * now it is possible to delete modules, but keep the links; * pattern properties: X and Y fields - exact coordinates of the pattern on the timeline; * module properties: X and Y fields - exact coordinates of the module; * module visualizer: "Phase Sync" oscilloscope option has been added; activate it to see a single waveform cycle; * module visualizer: new buttons "reset", "apply", "copy", "paste"; * ADSR->Sustain: new value "Repeat" (repeat the envelope until the module is stopped); * ADSR->Smooth Transitions: new value "volume change" (the volume will change smoothly, but the envelope start is not smoothed); * Amplifier: new controller "Bipolar DC Offset"; * Analog Generator: the "Freq2" controller has been ranamed to "Osc2" (pitch deviation of the additional oscillator); * Analog Generator: new controller "Osc2 volume" - additional oscillator volume; * Analog Generator: new controller "Osc2 mode" - mixing mode of the additional oscillator with the main one (add;sub;mul;min;max;bitwise AND;bitwise XOR); * Analog Generator: new controller "Osc2 phase" - starting phase of the additional oscillator; * Analog Generator: new option "Increased frequency computation accuracy"; * Delay: new controller "Delay multiplier"; * Delay: new "Delay unit" values: sec/44100, sec/48000, sample; * Delay: max delay length has been increased to 60 sec; * Delay: new controller "Feedback" (for sound and events); * Echo: new controller "Right channel offset" (how much to shift the right channel relative to the left in time); * Echo: new controller "Filter"; * Echo: new controller "Filter frequency"; * Filter Pro: new modes "stereo + smoothing" and "mono + smoothing" for additional parameter smoothing; * Filter Pro: new types "LP 6dB" and "HP 6dB"; * LFO: new controller "Sine quality"; * MetaModule->Play patterns: new values "on (repeat, endless)" and "on (no repeat, endless)"; * MetaModule: number of user defined controllers has been increased to 96; * MetaModule: controller color can now be changed by adding "@X" to the beginning of the name, where X is the group number from 0 to F; * MultiSynth: new option "Output port number = round-robin (cyclic)"; * Sampler: new option "Increased frequency computation accuracy"; * new pattern effects (column EE): * 1A - fine velocity slide up/down (XX - up speed; YY - down speed); once at the beginning of a line; * 33 - slot sync (for sv_sync_resume() in SunVox library); * 34 - set (XX) or reset (YY) project options: 1 - no portamento on the first tick; 2 - no velocity slide on the first tick; (for compatibility with old tracker formats); * 3C - copy track XX from from the pattern YY; for example, if XXYY = 0023, then the first track will be copied from the pattern named "23"; * 3D - write a random value to track YY; min value, max value and column must be in track 0, starting from line XX; see example "pat effect 3D random value"; * new examples and modules. See the full changelog on the site...

2.0c: bug fixes. 2.0: * iOS 11+: SunVox Audio Unit (AUv3) can now send MIDI notes and MIDI CC to other AU modules; * iOS 13.4+: full USB/Bluetooth keyboard support (like on desktops); * multiple module selection + ability to save several selected modules to a sunvox file; * timeline: supertracks (see simple_examples/supertracks.sunvox); * improved import of old tracker formats (XM and MOD); * new module - FMX: 5-operator Frequency Modulation synth; * new module - FFT frequency transformator; * timeline menu: new option "Vertical mode"; * timeline menu: new functions "Load" and "Save" to load/save selected patterns from/to a sunvox file; * timeline menu: new function "Detach" to convert the clones to the normal patterns; * module editor menu: new function "Detach" to detach the selected modules from the rest; * module editor menu: new function "Make MetaModule" for packing the selected modules into a single MetaModule; * now it is possible to delete modules, but keep the links; * pattern properties: X and Y fields - exact coordinates of the pattern on the timeline; * module properties: X and Y fields - exact coordinates of the module; * module visualizer: "Phase Sync" oscilloscope option has been added; activate it to see a single waveform cycle; * module visualizer: new buttons "reset", "apply", "copy", "paste"; * ADSR->Sustain: new value "Repeat" (repeat the envelope until the module is stopped); * ADSR->Smooth Transitions: new value "volume change" (the volume will change smoothly, but the envelope start is not smoothed); * Amplifier: new controller "Bipolar DC Offset"; * Analog Generator: the "Freq2" controller has been ranamed to "Osc2" (pitch deviation of the additional oscillator); * Analog Generator: new controller "Osc2 volume" - additional oscillator volume; * Analog Generator: new controller "Osc2 mode" - mixing mode of the additional oscillator with the main one (add;sub;mul;min;max;bitwise AND;bitwise XOR); * Analog Generator: new controller "Osc2 phase" - starting phase of the additional oscillator; * Analog Generator: new option "Increased frequency computation accuracy"; * Delay: new controller "Delay multiplier"; * Delay: new "Delay unit" values: sec/44100, sec/48000, sample; * Delay: max delay length has been increased to 60 sec; * Delay: new controller "Feedback" (for sound and events); * Echo: new controller "Right channel offset" (how much to shift the right channel relative to the left in time); * Echo: new controller "Filter"; * Echo: new controller "Filter frequency"; * Filter Pro: new modes "stereo + smoothing" and "mono + smoothing" for additional parameter smoothing; * Filter Pro: new types "LP 6dB" and "HP 6dB"; * LFO: new controller "Sine quality"; * MetaModule->Play patterns: new values "on (repeat, endless)" and "on (no repeat, endless)"; * MetaModule: number of user defined controllers has been increased to 96; * MetaModule: controller color can now be changed by adding "@X" to the beginning of the name, where X is the group number from 0 to F; * MultiSynth: new option "Output port number = round-robin (cyclic)"; * Sampler: new option "Increased frequency computation accuracy"; * new pattern effects (column EE): * 1A - fine velocity slide up/down (XX - up speed; YY - down speed); once at the beginning of a line; * 33 - slot sync (for sv_sync_resume() in SunVox library); * 34 - set (XX) or reset (YY) project options: 1 - no portamento on the first tick; 2 - no velocity slide on the first tick; (for compatibility with old tracker formats); * 3C - copy track XX from from the pattern YY; for example, if XXYY = 0023, then the first track will be copied from the pattern named "23"; * 3D - write a random value to track YY; min value, max value and column must be in track 0, starting from line XX; see example "pat effect 3D random value"; * new examples and modules. See the full changelog on the site...

2.0b: bug fixes. 2.0: * iOS 11+: SunVox Audio Unit (AUv3) can now send MIDI notes and MIDI CC to other AU modules; * iOS 13.4+: full USB/Bluetooth keyboard support (like on desktops); * multiple module selection + ability to save several selected modules to a sunvox file; * timeline: supertracks (see simple_examples/supertracks.sunvox); * improved import of old tracker formats (XM and MOD); * new module - FMX: 5-operator Frequency Modulation synth; * new module - FFT frequency transformator; * timeline menu: new option "Vertical mode"; * timeline menu: new functions "Load" and "Save" to load/save selected patterns from/to a sunvox file; * timeline menu: new function "Detach" to convert the clones to the normal patterns; * module editor menu: new function "Detach" to detach the selected modules from the rest; * module editor menu: new function "Make MetaModule" for packing the selected modules into a single MetaModule; * now it is possible to delete modules, but keep the links; * pattern properties: X and Y fields - exact coordinates of the pattern on the timeline; * module properties: X and Y fields - exact coordinates of the module; * module visualizer: "Phase Sync" oscilloscope option has been added; activate it to see a single waveform cycle; * module visualizer: new buttons "reset", "apply", "copy", "paste"; * ADSR->Sustain: new value "Repeat" (repeat the envelope until the module is stopped); * ADSR->Smooth Transitions: new value "volume change" (the volume will change smoothly, but the envelope start is not smoothed); * Amplifier: new controller "Bipolar DC Offset"; * Analog Generator: the "Freq2" controller has been ranamed to "Osc2" (pitch deviation of the additional oscillator); * Analog Generator: new controller "Osc2 volume" - additional oscillator volume; * Analog Generator: new controller "Osc2 mode" - mixing mode of the additional oscillator with the main one (add;sub;mul;min;max;bitwise AND;bitwise XOR); * Analog Generator: new controller "Osc2 phase" - starting phase of the additional oscillator; * Analog Generator: new option "Increased frequency computation accuracy"; * Delay: new controller "Delay multiplier"; * Delay: new "Delay unit" values: sec/44100, sec/48000, sample; * Delay: max delay length has been increased to 60 sec; * Delay: new controller "Feedback" (for sound and events); * Echo: new controller "Right channel offset" (how much to shift the right channel relative to the left in time); * Echo: new controller "Filter"; * Echo: new controller "Filter frequency"; * Filter Pro: new modes "stereo + smoothing" and "mono + smoothing" for additional parameter smoothing; * Filter Pro: new types "LP 6dB" and "HP 6dB"; * LFO: new controller "Sine quality"; * MetaModule->Play patterns: new values "on (repeat, endless)" and "on (no repeat, endless)"; * MetaModule: number of user defined controllers has been increased to 96; * MetaModule: controller color can now be changed by adding "@X" to the beginning of the name, where X is the group number from 0 to F; * MultiSynth: new option "Output port number = round-robin (cyclic)"; * Sampler: new option "Increased frequency computation accuracy"; * new pattern effects (column EE): * 1A - fine velocity slide up/down (XX - up speed; YY - down speed); once at the beginning of a line; * 33 - slot sync (for sv_sync_resume() in SunVox library); * 34 - set (XX) or reset (YY) project options: 1 - no portamento on the first tick; 2 - no velocity slide on the first tick; (for compatibility with old tracker formats); * 3C - copy track XX from from the pattern YY; for example, if XXYY = 0023, then the first track will be copied from the pattern named "23"; * 3D - write a random value to track YY; min value, max value and column must be in track 0, starting from line XX; see example "pat effect 3D random value"; * new examples and modules. See the full changelog on the site...

* iOS 11+: SunVox Audio Unit (AUv3) can now send MIDI notes and MIDI CC to other AU modules; * iOS 13.4+: full USB/Bluetooth keyboard support (like on desktops); * multiple module selection + ability to save several selected modules to a sunvox file; * timeline: supertracks (see simple_examples/supertracks.sunvox); * improved import of old tracker formats (XM and MOD); * new module - FMX: 5-operator Frequency Modulation synth; * new module - FFT frequency transformator; * timeline menu: new option "Vertical mode"; * timeline menu: new functions "Load" and "Save" to load/save selected patterns from/to a sunvox file; * timeline menu: new function "Detach" to convert the clones to the normal patterns; * module editor menu: new function "Detach" to detach the selected modules from the rest; * module editor menu: new function "Make MetaModule" for packing the selected modules into a single MetaModule; * now it is possible to delete modules, but keep the links; * pattern properties: X and Y fields - exact coordinates of the pattern on the timeline; * module properties: X and Y fields - exact coordinates of the module; * module visualizer: "Phase Sync" oscilloscope option has been added; activate it to see a single waveform cycle; * module visualizer: new buttons "reset", "apply", "copy", "paste"; * ADSR->Sustain: new value "Repeat" (repeat the envelope until the module is stopped); * ADSR->Smooth Transitions: new value "volume change" (the volume will change smoothly, but the envelope start is not smoothed); * Amplifier: new controller "Bipolar DC Offset"; * Analog Generator: the "Freq2" controller has been ranamed to "Osc2" (pitch deviation of the additional oscillator); * Analog Generator: new controller "Osc2 volume" - additional oscillator volume; * Analog Generator: new controller "Osc2 mode" - mixing mode of the additional oscillator with the main one (add;sub;mul;min;max;bitwise AND;bitwise XOR); * Analog Generator: new controller "Osc2 phase" - starting phase of the additional oscillator; * Analog Generator: new option "Increased frequency computation accuracy"; * Delay: new controller "Delay multiplier"; * Delay: new "Delay unit" values: sec/44100, sec/48000, sample; * Delay: max delay length has been increased to 60 sec; * Delay: new controller "Feedback" (for sound and events); * Echo: new controller "Right channel offset" (how much to shift the right channel relative to the left in time); * Echo: new controller "Filter"; * Echo: new controller "Filter frequency"; * Filter Pro: new modes "stereo + smoothing" and "mono + smoothing" for additional parameter smoothing; * Filter Pro: new types "LP 6dB" and "HP 6dB"; * LFO: new controller "Sine quality"; * MetaModule->Play patterns: new values "on (repeat, endless)" and "on (no repeat, endless)"; * MetaModule: number of user defined controllers has been increased to 96; * MetaModule: controller color can now be changed by adding "@X" to the beginning of the name, where X is the group number from 0 to F; * MultiSynth: new option "Output port number = round-robin (cyclic)"; * Sampler: new option "Increased frequency computation accuracy"; * new pattern effects (column EE): * 1A - fine velocity slide up/down (XX - up speed; YY - down speed); once at the beginning of a line; * 33 - slot sync (for sv_sync_resume() in SunVox library); * 34 - set (XX) or reset (YY) project options: 1 - no portamento on the first tick; 2 - no velocity slide on the first tick; (for compatibility with old tracker formats); * 3C - copy track XX from from the pattern YY; for example, if XXYY = 0023, then the first track will be copied from the pattern named "23"; * 3D - write a random value to track YY; min value, max value and column must be in track 0, starting from line XX; see example "pat effect 3D random value"; * new examples and modules; * bug fixes. See the full changelog on the site...

bug fixes

bug fixes

* SunVox Audio Unit (AUv3) can now be used as an effect (filter) inside other DAWs; * new module - Pitch Detector for detecting the pitch of the incoming signal; the frequency and note will be displayed; notes will be sent to the module output; see example "pitch correction (automatic tuning)"; * new module - ADSR envelope generator; see examples adsr, adsr2, adsr3; * new module - Ctl2Note for converting the controller value into a note (input - automation; output - notes); see example ctl2note; * Analog Generator: new waveform "harmonics" allows you to draw the harmonic distribution; but remember, if you turn on all 32 harmonics, then the module's performance will slow down 32 times compared to a pure sine generator; reduced polyphony and LQmono mode will slightly reduce the CPU load; * SpectraVoice: new harmonic types: overtones1+, overtones2+, overtones3+, overtones4+, metal; * LFO: new controller "Frequency scale" (in percents) - use it to slow or accelerate the oscillations; * LFO: new controller "Smooth transitions" - disable it to get hard transitions inside the waveform; * Generator, Kicker, SpectraVoice: increased resolution (accuracy) of Attack and Release controllers; (only if the base version is 1.9.6 or higher in the Project Properties); * Sound2Ctl: new option "Send only changed values"; * MultiSynth: new option "Round the note (X-axis on curve3) to the nearest integer" (remove microtones); * MultiSynth: new option "Round the pitch (Y-axis on curve3) to the closest"; * MultiSynth: new option "Record notes to the scale (curve3)"; see example "dynamic scale"; * MultiSynth: new option "Output note = Output note - Input note + C5" (difference between output and input pitch); * MultiSynth: new option "Output port number = note % number of connected outputs"; (% is the modulo (remainder) operation); see example "drumkit 3 (multisynth)"; * MultiSynth: new option "Output port number = polyphonic channel % number of connected outputs"; * MultiSynth: new curve 3 describing the dependence of the output pitch on the input note; * MetaModule: new options "Receive notes from the keyboard" and "Don't receive notes from the keyboard"; * MetaModule -> User defined controllers: edit buttons (add,delete,move up/down) have been added; * Pitch shifter: incoming notes change the value of controller 02.Pitch; the C5 note corresponds to zero; * Pitch shifter: new controller "Bypass if pitch=0" - play the original signal when the module does not change the pitch; * MetaModule, MultiSynth, Sound2Ctl, Sampler, Analog Generator: options can be accessed in the same way as controllers (see the exact numbers in the options list); * new MIDI IN mode for modules - "never" (never receive MIDI data); * improved popup menus: additional navigation keys (up,down,left,right,space,enter,escape); horizontal scroll if the menu does not fit on the screen; highlight of the current effect; * new pattern effects (column EE): 05 and 06 - pitch bend up/down (one semitone = 100 (256dec)); * new keyboard shortcuts for the timeline: slice, mute, solo, unmute, set restart position, snap to grid (unassigned by default); * new folder "curves" (with curves for MultiSynth, MultiCtl and WaveShaper); * new modules in the instruments/ and effects/ folders; * new examples (SunVox Compo 2020.02 winners): Trackerbound - Alpha Ursae Minoris, Trackerbound - Silentium, manganoid - Lazy Thunder, SawZer - Phantom; * bug fixes.

bug fixes

bug fixes

missing files added in AU-version

* Audio Unit Extension (AUv3 instrument) has been added - SunVox can now be used inside any AU host; * Main menu -> Export/import: additional export/import functions provided by the system; * extended set of supported MIDI sync commands (slave mode): Start/Stop/Continue, MIDI Clock, Song Position Pointer; * full support of 65534 modules per project and 32 tracks per pattern; * optimization of graphic and sound engines; * Distortion: new type "overflow2" (symmetric overflow); * Loop: incoming notes (Note ON commands) restart the loop; * Delay now also delays the incoming events (note, pitch, phase, velocity); * MultiSynth: new option "Generate missed Note OFF cmds"; * Pattern Editor: new function "Cyclic shift"; * new pattern effects (column EE): * 15 - change the relative note and finetune of the module; XX - relative note (00 - ignore; 01 = -127; 80 = 0; FF = 127); YY - finetune (00 - ignore; 01 = one semitone lower; 80 = 0; FF = one semitone higher); * 31 - jump to line XXYY (address) right after the end of the current line; * 32 - set jump address mode YY: 0 - absolute address, relative to the start of the timeline (default); 1 - ( pattern beginning + address ); 2 - ( pattern beginning - address ); 3 - ( next line + address ); 4 - ( next line - address ); * new set of destructive effects (irreversibly change the contents of the pattern): * 38 - delete an event on track XX with a probability of YY (00..FF(100%)); see simple_examples/pat effect 38 self destructive.sunvox * 39 - cyclic shift of track XX down by YY lines; * 3A - generate a new iteration of YY-line polyrhythm on track XX; see simple_examples/pat effect 3A polyrhythm.sunvox; * 3B - copy track XX to a pattern named YY; * MutliCtl, Sound2Ctl, Pitch2Ctl, Velocity2Ctl: "OUT Controller" range has been increased to 255, so now it's also possible to address the MIDI controllers (CC0 = 128, CC1 = 129, ...) of the connected module(s); * new module visualization settings: background options (outline/fill), level scale (linear/logarithmic(dB)/RMS), peak meter; * Project properties: "Sync" settings allow you to specify the types of synchronization commands that the project accepts; * Preferences -> Main: new option "Autosave" (disabled by default); * Preferences -> MIDI: "Module preview channel" - MIDI channel that will be used to receive notes during module pre-listening (when selecting a file); * Preferences -> MIDI: "Sync source" - MIDI device for receiving synchronization commands; * Preferences -> Timeline: new option "Hexadecimal line numbers"; * Preferences -> Interface -> Shortcuts: delete buttons [x] have been added; * improved text fields (long text scrolling has been added) + improved virtual text keyboard; * simple copy/paste (ctrl+c/v) in all text fields; * Wi-Fi export/import: additional file information fields: size and modification date/time; * export to WAV: new mode "File per module (connected to selected)" - export modules connected (as sources) to the selected module; * new keyboard shortcut: SHIFT + 7 - cyclic shift up (for the selected region in the pattern editor); * new keyboard shortcut: SHIFT + 8 - cyclic shift down; * new instruments and effects from other users (see the instruments and effects folders); * new examples (SunVox Compo 2019.03 winners): Trackerbound - its over now; make a wish; Logickin Lambda - Soar Beyond; manganoid - Dash of Wind; * new examples: NightRadio - 5100, 5101, 5102, Sines of Night, Au; Manwe - Aquar.io Ambient; Philip Bergwerf - Venaya; * bug fixes.

v1.9.4b/c: bug fixes. v1.9.4: * user files are now available through the Files app; * partial USB/Bluetooth keyboard support (no key release, no Home/End, no F1/F2/...); * improved iPhone X display support; * sound engine optimization; * indicating the modules whose controllers are tied to the MIDI; * additional slider for scrolling the controllers when there is not enough space on the screen; * spectrogram has been added to the to the spectrum analyzer; * detailed settings of the spectrum analyzer are now available through the main menu -> Preferences -> Modules; * Amplifier: new controller "Gain" for high amplification (x100, x1000 and higher); * Analog Generator: new option "True zero attack/release" - turn it on when you need a very fast (instantaneous) zero attack or/and release; * Analog Generator: new waveforms: "noise with spline interpolation (sampler)", "white noise", "pink noise", "red noise", "blue noise", "violet noise", "grey noise"; * Compressor: new mode "peak zero latency" for compression/limiting without delay; modes "peak" and "RMS" operate with a delay of 1 ms; * Distortion: new types: "foldback2", "foldback3", "overflow"; * LFO: new waveform "random interpolated" (same as random (5), but with a smoother transition between the signal levels); * DrumSynth: three additional panning controllers for the bass, hihat and snare; * Kicker and DrumSynth: panning controller can now be set locally (for each note separately); * Kicker: "Boost" (old name - "Vol.addition") controller works again after it was accidentally broken in SunVox 1.6 :) (base SunVox version in the project properties must be 1.9.4 or higher); * MultiCtl: new controllers "Response" and "Sample rate" to smoothly change the output value; response=1000 - immediate change; response<1000 - smooth change; optimal sample rate = 150Hz, please avoid higher values without the urgent need; * Timeline: new function "set restart position" - use it to change the position which the project should restart from after the project end; * pattern effect 03 (slide to note): default speed value (XXYY) is 256 (100 in hex); * new pattern effect 24: take a note from line XXYY on the same track; if the note to the left of the effect is specified, it will be used as the transposition value (relative to C5: c5 - one semitone higher, C4 - one octave lower, etc.); if the module number is missing, then the module number from line XXYY will be used; * new pattern effect 25: take a random note from the range of lines XX..YY (inclusive) on the same track; * new pattern effect 26: take a note from track XXYY on the same line; * new pattern effect 27: take a random note from the range of tracks XX..YY (inclusive) on the same line; * new pattern effect 28: take a note from line XXYY on track 0; * new pattern effect 29: take a random note from the range of lines XX..YY (inclusive) on track 0; see example "pat effect 29 random note from trk0"; * module remapping: "pattern" button has been added; * dialog window shortcuts: Y or ENTER = first button on the left; N = second button; ESC = cancel; 1...9 = buttons from left to right; * if you enter the file name "exporttest" when exporting to WAV, the SunVox engine speed test will be performed (without saving to disk); * new keyboard shortcut: CTRL + SHIFT + N - new project; * new keyboard shortcut: SHIFT + F10 - play from the pattern cursor; * new instruments: keyboard/NR SuperSaw (lo-fi), analog11, analog12, pads/analog_distorted2, wind/NR Sax; * new instruments and effects from other users (see the instruments and effects folders); * new simple examples: idm, pat effect 29 random note from trk0.

bug fixes