CPU Micron
Música
USD 14.99 · Diseñado para iPad. No verificado para macOS.
iPad
CPU Micron is a schematic-accurate recreation of the analogue synthesiser voice Roland built into the MC-202 in 1983, made for iPad by Central Processing Unit.
Rather than approximating the sound by ear, its DSP is built from the original circuit diagram and the real component values: the CEM3340 oscillator, the IR3109 transconductance filter, the discrete-transistor envelope and the op-amp LFO. Every figure comes from the schematic, from a measurement of a working hardware unit, or from the manufacturer's own service-manual specifications — and where a figure could be both calculated and measured, the two agree.
THE VOICE
• Oscillator with simultaneous saw and pulse, variable pulse width and PWM, and a 2′ to 16′ footage switch
• Sub oscillator one and two octaves down
• Four-pole low-pass filter that self-oscillates into a clean sine at the top of the control, reproduced from the real feedback path
• Discrete ADSR envelope on its real RC time constants, and a triangle LFO with rate and fade-in delay
• TUNE, PORTAMENTO, ACCENT, VOLUME and TEMPO, on a hardware-exact panel
THE SEQUENCER
Reconstructed from the original owner's manual rather than replaced with a step grid: two channels, gate time as a fraction of step time, bars stored as data, and the machine's own key map. A sequence can be written to an audio file and played into the hardware's tape input, or read back from tapes the machine itself recorded - notes, accents, glides, ties and bar lines intact.
APP AND PLUG-IN
CPU Micron is both an app and an Audio Unit (AUv3) plug-in. Play it on its own, or inside GarageBand and other apps that host Audio Unit instruments, with the sequencer following your song's tempo and transport, and your sound and sequence saved with the song.
AND EVERYTHING 1983 LACKED
• Patch and sequence memory, with factory banks of basses, leads and effects
• One library of presets and sequences, shared by the app and the plug-in, with export and import through the Files app for backing up, sharing and moving between devices
• Two randomisers, one for patches and one for sequences, that write something worth keeping
• MIDI CC on every panel control
• Five panel finishes
• The full manual, built in
For iPad, in landscape. No account, no subscription, no network.
Calificaciones y reseñas
- Esta app no ha recibido suficientes calificaciones ni reseñas para mostrar un resumen.
Two corrections to the sound, taken from the original circuit:
• With the VCA switched to GATE, the envelope now still shapes the filter. Before, the filter ignored the envelope in that position.
• The filter's keyboard tracking (KYBD) now follows the pitch the way the original does, centred two octaves below middle C, and glides with the pitch when portamento is on.
The manual's wording is clearer, with two corrected figures in The Voice.
El desarrollador (CHRISTOPHER PHILIP SMITH) indicó que las prácticas de privacidad de la app pueden incluir el manejo de datos que se describe a continuación. Para obtener más detalles, consulta la política de privacidad del desarrollador .
No se recopilan datos
El desarrollador no recopila ningún dato en esta app.
Accesibilidad
El desarrollador aún no ha indicado cuáles funciones de accesibilidad admite esta app. Obtén detalles
Ficha técnica
- Vendedor
- CHRISTOPHER PHILIP SMITH
- Tamaño
- 16.4 MB
- Categoría
- Música
- Compatibilidad
Requiere iPadOS 15.0 o posterior.
- iPad
Requiere iPadOS 15.0 o posterior. - Mac
Requiere macOS 12.0 o posterior y una Mac con el chip M1 de Apple o posterior. - Apple Vision
Requiere visionOS 1.0 o posterior.
- iPad
- Edad
4+
- 4+
- Copyright
- © 2026 Central Processing Unit

