eMaxMobileApp
Спорт
99,00 ₽ · Предназначено для iPad. Не проверялось для macOS.
...the most advanced optimizing tool for STePS systems.
All Bluetooth capable displays SC-EM800, SC-E8000, SC-E7000, SC-E6100, SW-EN600-L switch and EW-EN100 cockpit are supported!
DU-EP801, DU-EP800, DU-E80X0, DU-EP600, DU-E7000, DU-E6XXX and DU-E50X0 drive units are supported.
Partially compatible also with the latest Shimano motor firmware versions!
See www.eMax-Tuning.com, especially the "news" and "support" section and/or get detailed & personal information via eMail from info@eMax-Tuning.com
Also please check the document https://www.emax-tuning.com/eMax-possibilities.pdf for the tuning possibilities which are highly depending on the drive unit type and currently installed motor firmware version.
TAKE CARE: For increasing motor max. support speed an additional license key is necessary! See also www.eMax-Tuning.com.
TAKE CARE: This version is not able to increase max. motor support with the latest motor firmware versions from Shimano!
Please have a look on the news section of www.eMax-Tuning.com/home-en#news or contact us via info@eMax-Tuning.com.
Also please check the document https://www.emax-tuning.com/eMax-possibilities.pdf for the tuning possibilities which are highly depending on the drive unit type and currently installed motor firmware version.
This version 1.89 for STePS drive units is capable to communicate with the SC-EM800, SC-E8000, SC-E7000, SC-E6100 display types, EW-EN100 cockpit as well as the SW-EN600-L unit.
This version is capable to optimize DU-EP801, DU-E800, DU-EP600, DU-EP500, DU-E80X0, DU-E7000, DU-E6XXX and DU-E50X0 drive units as well as its variants "RS" and "CRG".
new in version 1.89 (18.05.26):
- partial compatibility for EP5 motor firmware 4.1.1
new in version 1.88 (26.08.25):
- partial compatibility for EP801/EP6 motor firmware 4.4.2
new in version 1.87 (23.08.25):
- minor optimizations
new in version 1.86 (10.08.25):
- new battery types added, minor bugfix and optimizations
new in version 1.85 (10.02.25):
- minor bugfix and optimizations
new in version 1.84 (25.01.25):
- partial compatibility for EP801/EP6 motor firmware 4.4.1
- optimizations and improvements
new in version 1.83 (07.09.24):
- bug fix for crash on some very rare bike configurations at 73% of bike information reading
new in version 1.82 (31.08.24):
- optimizations and minor bug fixes for DU-EP800
new in version 1.77 (30.06.24):
- partial compatibility for EP801/EP6 motor firmware 4.3.0
new in version 1.76 (15.06.24):
- new battery types and RS default values for generation 2 added
new in version 1.75 (12.06.24):
- bugfix for DU-E8000 motor firmware 4.10.0
new in version 1.74 (20.05.24):
- partial compatibility for DUEP800 (DUEP800, DUEP800-CRG) FW 4.2.0
- partial compatibility for DUE80X0 (DUE8000, DUE8080) FW 4.10.0
- partial compatibility for DUE7000 FW 4.8.0
- partial compatibility for DUE61X0 (DUE6100, DUE6100-CRG, DUE6110, DUE6180) & FW 4.8.0
- partial compatibility for DUE50X0 (DUE5000, DUE5080) FW 4.5.0
See also https://www.emax-tuning.com/eMax-possibilities.pdf
new in version 1.73 (15.04.24):
- partial compatibility for EP801/EP motor firmware 4.2.2
new in version 1.72 (26.03.24):
- partial compatibility for EP801/EP motor firmware 4.2.1
new in version 1.71 (09.02.24):
- partial compatibility for EP801/EP motor firmware 4.2.0
- minor optimizations
new in version 1.70 (23.10.23):
- minor bug fix
new in version 1.69 (09.10.23):
- minor improvements, change of EP801/EP6 message dialog texts
new in version 1.68 (29.09.23):
- adaption to DUE50X0 (DUE5000, DUE5080) FW 4.4.10
new in version 1.67 (11.09.23):
- bugfix for EP8 (DU-EP800) and new motor firmware 4.1.11
new in version 1.66 (07.09.23):
- adaption to DUEP801 (DUEP801, DUEP801-CRG) FW 4.1.1
- adaption to DUEP600 (DUEP600, DUEP600-CRG) FW 4.1.1
- adaption to DUEP800 (DUEP800, DUEP800-CRG) FW 4.1.11
- adaption to DUE80X0 (DUE8000, DUE8080) FW 4.9.5
- adaption to DUE7000 FW 4.7.7
- adaption to DUE61X0 (DUE6100, DUE6100-CRG, DUE6110, DUE6180) & FW 4.7.7
new in version 1.65 (02.09.23):
- EP801/EP6 change of max. peak power and max. torque range added
- EP801/EP6 "reduced max. speed setting" enabled and enhanced
- EP801/EP6 "motor angle setting" enabled
- SC-EN500 display added
- new cassette types added (just for reading)
- correction in EP8xx performance view site with jump to next edit field
- bugfix: display speed adjustment value was unintentionally jumping from max. value +5,0 back to -5,0 when pressing forward button
Разработчик Markus Schlegel указал, что в соответствии с политикой конфиденциальности приложения данные могут обрабатываться так, как описано ниже. Подробные сведения доступны в политике конфиденциальности разработчика .
Сбор данных не ведется
Разработчик не ведет сбор данных в этом приложении.
Универсальный доступ
Разработчик пока не предоставил сведений о функциях универсального доступа, поддерживаемых в этом приложении. Подробнее
Информация
- Провайдер
- Markus Schlegel
- Размер
- 4,8 МБ
- Категория
- Спорт
- Совместимость
Требуется iOS 13.0 или новее.
- iPhone
Требуется iOS 13.0 или новее. - iPad
Требуется iPadOS 13.0 или новее. - iPod touch
Требуется iOS 13.0 или новее. - Mac
Требуется macOS 11.0 или новее и компьютер Mac с чипом Apple M1 или новее. - Apple Vision
Требуется visionOS 1.0 или новее.
- iPhone
- Языки
- английский
- Возраст
4+
- 4+
- Авторские права
- © IBHardSoft

