- Added the possibility of adding new IP Touch Supervisors (art. 01423/.B and art. 01426/.B) to a Smart system, using the “Integrations” menu (for integration in a Pro system, please refer instead to the VIEW Pro App). - Added new “warm white” colour for the LED indicator light of the following IoT connected devices: Electronic control mechanism, 2-way switch mechanism, Actuator 16A, Rolling shutter mechanism and Dimmer mechanism. - Added the “Help and feedback” section with direct access to the on-line manual, to video tutorials and technical support.

Graphic and functional enhancements

Graphic and functional enhancements

Device updating introduced to allow historical data logging, can be enabled on APP View with two optional Premium subscriptions (Base and Full): * ‎Detected temperatures and setpoints, heating/cooling activations * Energy consumption/production, with enhanced granularity and a weather link * Burglar alarm system radio sensor charge * Activation count and hours of activation for lights and generic loads

Functional enhancements implemented

Added mounting frame for dial thermostat (art. 02974/30811) and thermostatic head (art. 03989) Climate control boosting (groups, fan coils) New functions on existing products: • 3-speed fixed fan coil management on multif. actuat. with 4 relay outputs (art. 03985); • variable speed fan coil management on actuat. 0/1-10VDC + relay (art. 03986); • climate control zone control via groups on dial thermostat (art. 02973/30810); • mesh network repetition on relay module (art. 03981)

Added mounting frame for dial thermostat (art. 02974/30811) and thermostatic head (art. 03989) Climate control boosting (groups, fan coils) New functions on existing products: • 3-speed fixed fan coil management on multif. actuat. with 4 relay outputs (art. 03985); • variable speed fan coil management on actuat. 0/1-10VDC + relay (art. 03986); • climate control zone control via groups on dial thermostat (art. 02973/30810); • mesh network repetition on relay module (art. 03981)

Functional enhancements implemented

Added support to the 3in 1out module device (art. 03983) Added support to the 4out relay multif. actuator device (art. 03985) Added support to the Actuator 0/1-10VDC + relay device (art. 03986) Added the possibility of extending the mesh cover of devices by configuring the connected control (xx591) as a mesh repeater. In this configuration, other functions cannot be configured on the device

Update for IoT-connected RFID outer switch. Perform the update to continue ensuring your system's security and gain new features.

Added compatibility between Roxie Outdoor Station and Vimar VIEW Portal to gain access using the View KEY app.

Graphic and functional enhancement

Graphic and functional enhancements

Added support for the ROXIE Outdoor station device (art. 40170) Introduced the possibility for the end user to edit certain parameters of the ROXIE Outdoor station (art. 40170) Graphic and functional enhancements

Added support for the ROXIE Outdoor station device (art. 40170) Introduced the possibility for the end user to edit certain parameters of the ROXIE Outdoor station (art. 40170)

Graphic and functional enhancements

Added compatibility between connected IoT NFC/RFID landing reader and Vimar VIEW Portal. Added possibility of configuring the relay change-over between NFC/RFID landing reader and IoT connected relay module/IoT connected actuator.

Added the management of white backlighting of the connected 2-way switch in the Linea series for Button 1M vertical light beam. Introduced the possibility of configuring the IoT UWB radar as crowding detector in a room (requires firmware updating and reconfiguration for devices already installed). Improved the management of firmware updating (version 1.x without device reset or version 2.x with device reset). Added Zigbee firmware for connected thermostat.

Added the management of white backlighting of the connected 2-way switch in the Linea series for Button 1M vertical light beam. Introduced the possibility of configuring the IoT UWB radar as crowding detector in a room (requires firmware updating and reconfiguration for devices already installed). Improved the management of firmware updating (version 1.x without device reset or version 2.x with device reset). Added Zigbee firmware for connected thermostat.

Introduced the possibility of hiding a configured Bluetooth device from all users of the Vimar VIEW App. Introduced the possibility of configuring the IoT UWB radar as a dusk/dawn 1-way switch to turn on the light or use it to detect absences in a room (requires firmware update for devices already installed and subsequent reprogramming). Enhanced the management of groups: IoT UWB radar Sensors can be grouped together (requires firmware update for devices already installed and subsequent reprogramming). Introduced the possibility of configuring the relays (xx593 and 03981) as auxiliary relay (requires firmware update for devices already installed and subsequent reprogramming). Enhanced the management of groups: the relays (xx593 and 03981) configured as auxiliary relay can be associated with a UWB radar (requires firmware update for devices already installed and subsequent reprogramming).

Introduced the possibility of hiding a configured Bluetooth device from all users of the Vimar VIEW App. Introduced the possibility of configuring the IoT UWB radar as a dusk/dawn 1-way switch to turn on the light or use it to detect absences in a room (requires firmware update for devices already installed and subsequent reprogramming). Enhanced the management of groups: IoT UWB radar Sensors can be grouped together (requires firmware update for devices already installed and subsequent reprogramming). Introduced the possibility of configuring the relays (xx593 and 03981) as auxiliary relay (requires firmware update for devices already installed and subsequent reprogramming). Enhanced the management of groups: the relays (xx593 and 03981) configured as auxiliary relay can be associated with a UWB radar (requires firmware update for devices already installed and subsequent reprogramming).

Introduced the possibility of hiding a configured Bluetooth device from all users of the Vimar VIEW App. Introduced the possibility of configuring the IoT UWB radar as a dusk/dawn 1-way switch to turn on the light or use it to detect absences in a room (requires firmware update for devices already installed and subsequent reprogramming). Enhanced the management of groups: IoT UWB radar Sensors can be grouped together (requires firmware update for devices already installed and subsequent reprogramming). Introduced the possibility of configuring the relays (xx593 and 03981) as auxiliary relay (requires firmware update for devices already installed and subsequent reprogramming). Enhanced the management of groups:  the relays (xx593 and 03981) configured as auxiliary relay can be associated with a UWB radar (requires firmware update for devices already installed and subsequent reprogramming).

Added management of groups of devices, combined with the new IoT connected commands: it is possible to use the IoT connected commands to control lights, shutters and generic loads (requires firmware update and subsequent reprogramming for the already installed devices) Graphic and functional enhancements

Added management of groups of devices, combined with the new IoT connected commands: it is possible to use the IoT connected commands to control lights, shutters and generic loads (requires firmware update and subsequent reprogramming for the already installed devices)

Graphic and functional enhancements.