• SL6: Major IP and VoIP onboarding improvements, updated embedded VoIP binary to 2.3.1, improved BLE stability, better error handling, and enhanced firmware update flow. • Firmware Updates: Fixed bug selecting latest version from Orion in SL6 IP/VoIP onboarding and improved timeout handling and cancellation behavior. • LEO Products: Main operation mode always shown, crash fixes in configuration and demo mode. • Lyra: Advanced settings is now visible again, onboarding fixes, and crash fixes. • General: Multiple Bluetooth stability improvements, configuration fixes, UI enhancements, and crash fixes.

• Fixed so onboarding step dialog does not freeze again when it fails and is dismissed • SL6: Added so the firmware update and voip step also shows more detail on what is going on and also shows progress for the voip binary being written and firmware update file being written as well as saving and reading parameters • SL6: Added so app retries exiting config mode and also retries reading sip capable parameter if it fails • Fixed crash in onboarding when app fails to load facilities for a selected company due to an execpetion • Changed so checking signal strength in onboarding and simulate alarm shows bad reception dialog if signal strength is below 40% • Hopefully made so app does not show the BLE device stopped dialog if the user cancels a request intentionally like entering different modes such as test mode when entering the diagnostics page or config mode when entering the config. The app should be better to not show the dialog when its not truly unresponsive • Fixed bug where onboarding step dialog cut content off if the dialog extended the full width of the screen vertically. It will now allow the user to scroll through the steps if all the steps cant be viewed on screen • SL6: Added so if app fails to enter config mode after 90 when waiting for VOIP files to be transferred to Telit module it will try to enter config mode again in addition to reading the SIP capable parameter • Fixed so progress bar does not flicker when updating progress in onboarding step dialog • Implemented banner to display information to user to example display ongoing maintenance and such • SL6: Fixed so app sync configuration to Orion correctly at the end of onboarding • SL6: Added retries for writing parameters during onboarding • Fixed bug where device stopped responding and disconnect dialog did not appear sometimes like in the onboarding • Fixed app not dismissing popup dialogs if user was taken to scan view due to disconnect or device stopped responding • SL6: Moved firmware update to beginning of onboarding instead • SL6: Added ability to set log level for M2mapz configuration parameter. Can be accessed in configuration under VOIP group. Click description icon for more details on how to use it • LEO: Fixed so app hides main operation mode if FW is 2.10 or higher and app uses same logic as old LYNX app • IPS: Fixed crash happening due to app not handling Bluetooth exceptions when doing a learning trip • Fixed an alarm translation not being in sync with Orion Web • Moved configuration section to be above feature section in device view • Lyra: Fixed clipping of values occurring in device status view if uptime had a long duration • SL6: Removed the Force VOIP setup dialog prompt in device view when clicking on setup device if the SL6 has firmware 6.19 or higher and the VOIP supported flag was false

• SL6: Fixed test alarm interval not being set to correct value for VOIP onboarding • SL6: Updated text for configure VOIP step to let user know that this step can take some time to complete

• SL6: Fixed a regressive bug where SL6 IP onboarding failed to sync config to Orion on last step • Fixed so devices are greyed out in scan view for users who don't have access to the device • SL6: Fixed bug where app did not filter out removed configuration parameters when composing support email with all parameters • Fixed empty scan view text being wrong for device tab if BLE scanning timed out • SL6: Made so app retries getting VOIP files if they fail to get fetched from Orion in VOIP onboarding • Fixed bug where app failed to start if viewing app on a phone that has French or German set as language • Fixed issue again where app goes back to onboarding sometimes when navigating back from facility view or device view • SL6: Fixed issue where if app fails to fetch alarm centers due to exception, the app will not continue on to next step in onboarding • SL6: Added so app rechecks sip capable parameter after 90 seconds to get proper value since SL6 takes some time to write the VOIP files to Telit module • Fixed issue where app fails to dismiss step onboarding dialog if a step fails sometimes due to a threading problem

• New design • Stability and bug fixes • Sl6 and lyra onboarding improvements • VOIP functionality

• Fixed bug where app failed to connect to SL6 devices with firmware version below 6.00 • Fixed a crash happening when using cached signature when creating a logbook entry • SL6: Fixed a crash happening when going into configuration storage view and app fails to enter configuration mode which is not a timeout exception • SL6: Fixed a crash happening when going into configuration bookmark view and app fails to enter configuration mode which is not a timeout exception • SL6: Fixed a crash happening sometimes when displaying facility devices in facility view • Made so more (three dot) icon is more clickable in scan view • Fixed bug where app could not find device when updating firmware via USB directly from scan view

• Stability and crash fixes • Improved BLE connectivity and app will not become deadlocked in certain situations • Fixed bug where app failed to read configuration parameters sometimes • Map pins in facility map view accessed through the scan view, will now change color if an alarm is on that facility and the color will be the most severe alarm • Firmware update will now read all parameters and cache them on the phone. It will then update the firmware and write them back to the device after its finished updating the firmware • Added so app will only show devices that are near and connectable through BLE in facility view. User can check the "Show offline devices" and the offline devices will show again. This checkbox is unchecked by default • SL6: Show whether device and registration token is set or not in diagnostics view for FW 6.00 or higher • A lot of improvements and fixes to the Lyra and SL6 onboarding • SL6: IP parameters are now hidden if the user is not regional or domain admin in configuration

• Added demo mode for all our products accessible from main side menu • Added localization support for Swedish, German, and French • Added ability to override selected language in account settings • Updated UX for alarm pages • Fixed viewing product manuals • Added product configuration support options for copying device config to clipboard or taking a screenshot of config • Added web logbook support • Added viewing web NOVA facility page and allow for remote screen • Other bug fixes, improvements and small tweaks

• Updated SL6 configuration design and added ability to bookmark and store configuration on device and download existing configuration by serial number from Orion • Added diagnostics, simulate alarms, firmware update, and write sound files for SL6 • Added support for FD1600, LEO devices, GL6, IPS, MX products, and SL3000 • Small UX updates throughout app • Improvements to SL6 and Lyra onboarding • Other bug fixes and improvements

• Updated UI design • Ability to connect to SL6 devices

Bug fixes and improvements