simos.app

Verktyg

Endast för iPhone

Gratis · Köp i appar

iPhone

simos.app is a diagnostic, data logging and flashing tool built specifically for VAG petrol engines running Simos 18.1, 18.2, 18.6, 18.10 and Simos 12.1 ECUs. The platforms found in most modern TSI and TFSI engines across Audi, VW, Škoda, SEAT, Cupra and Porsche. LIVE DATA LOGGING Read ECU parameters directly in real time. Monitor boost pressure, injection timing, lambda, temperatures, torque and more at high sample rates over a Bluetooth LE connection. ECU IDENTIFICATION Read software versions, calibration IDs and hardware info straight from the control unit. LOG ANALYSIS Visualize recorded sessions with multi-channel graphs. Spot correlations between parameters without leaving the app. FLASHING Update your ECU and TCU to the latest version for your vehicle or flash a custom tune. Full features available for Simos 18.1/18.10 and 18.6. Flashing stock files or pre-unlocked ecus for Simos 18.2, 18.4, 18.41 and Simos 12.1. –– Built for enthusiasts, tuners and workshops who need more than a generic scan tool. Basic knowledge of ECU diagnostics is recommended. This app is for informational and diagnostic purposes only. Any modifications to vehicle systems are the sole responsibility of the user and must comply with local laws and regulations. –– Bluetooth LE OBD adapter required. Get yours here: https://simos.app/dongle Other compatible adapters: Macchina A0, DIY A0 clone https://github.com/Switchleg1/AMAleg require custom firmware: https://simos.app/dongle/firmware

  • Det visas ingen översikt eftersom den här appen inte har fått tillräckligt många betyg eller recensioner.

- DQ500 (0DL): CAL and full flashing (beta) - AQ250 Gen1 (09G, KWP2000): full flashing (beta), M32R and SH-2 builds - DQ381 full flash asks for confirmation first (beta); BOOT and ASW flashing needs dongle firmware v1.12 or newer - Flashing is free for ECUs with a blank or unreadable VIN, so a failed flash can always be recovered - CarPlay: gauge tiles show the recorded min and max as numbers - AQ250 / AQ300 / AQ450 (Aisin AW): own Mode 22 logging with turbine and output speed, ATF temperature, converter slip, gear, lock-up and solenoid currents - New DSG Basic Setting (DQ250 MQB, 0D9): relearns the shift actuator and synchroniser positions with the engine idling, with progress and step-by-step hints - Reset DSG Adaptations: frees a routine left over from an earlier run, waits for the TCU to finish, and errors now say what to do - DSG Basic Setting and Reset DSG Adaptations now only show for DQ250 MQB (0D9) TCUs

Utvecklaren Tycho Sebastian Holzer har meddelat att appens integritetspraxis kan omfatta hantering av data enligt beskrivningen nedan. Mer information finns i utvecklarens integritetspolicy .

  • Data som inte kopplas till dig

    Följande data kan samlas in men den kopplas inte till din identitet:

    • Användnings­data
    • Diagnostik

Integritetspraxis kan variera, exempelvis p.g.a. vilka funktioner du använder eller din ålder. Läs mer

Utvecklaren har ännu inte uppgett vilka hjälpmedels­funktioner som den här appen stöder. Läs mer

Storlek
7,6 MB
Kategori
Verktyg
Kompatibilitet
Kräver iOS 17.6 eller senare.
  • iPhone
    Kräver iOS 17.6 eller senare.
Språk
engelska
Ålder
4+
Köp i appar
Ja
  • App VIN Unlock 229,00 kr
  • Wizard: Pops & Bangs - Single Bin 229,00 kr
  • Stage 1 Bin 2 295,00 kr
Leverantör
Holzer Consulting
  • Holzer Consulting har identifierat sig som appens näringsidkare och har bekräftat att produkten eller tjänsten överensstämmer med gällande EU-lagar.
  • D-U-N-S-nummer
    487319588
  • Adress
    Vogesenstrasse 139
    4056 Basel
    Schweiz
  • Telefonnummer
    +41 772240588
  • E-post
    info@holzer-consulting.ch
Copyright
© 2026 Holzer Consulting Tycho Holzer