Spool Programmer
Verktyg
Endast för iPhone
Gratis · Designad för iPhone
iPhone
Transform your 3D printing workflow with Spool Programmer, the essential tool for programming RFID tags on your filament spools. Whether you're using Anycubic printers or building your own filament management system, this app makes tag programming simple, fast, and reliable.
POWERFUL FEATURES
• Write complete filament data to NTAG215/216 tags in seconds
• 18 pre-configured profiles covering all major filament types
• Read existing tags to verify or clone configurations
• Check tag status and memory layout
• Format tags for fresh programming
• Custom color selection with RGB sliders and 16 presets
• Support for 500g, 1kg, and 2kg spool sizes
• Configurable print temperatures (nozzle, bed, chamber)
FILAMENT TYPES SUPPORTED
PLA, PLA+, PLA Matte, PLA Silk, PETG, ABS, TPU, Nylon, ASA, PC, PVA, HIPS, and BVOH. Each profile includes optimized default temperatures that you can customize.
INTUITIVE INTERFACE
Beautiful card-based design that guides you through every step. Select your filament type, choose a color, adjust temperatures, and write—all in a clean, modern interface that follows Apple's design guidelines.
SMART & SAFE
• Automatic detection of write-protected tags
• Clear error messages with helpful guidance
• Validates tag compatibility before writing
• Preview data before committing to tag
• No account required, no tracking, no ads
PERFECT FOR
• Makers managing multiple filament spools
• 3D printing enthusiasts with Anycubic printers
• Anyone building custom filament management systems
• Hackerspaces and makerspaces
• Professional print farms
TECHNICAL DETAILS
Supports standard NTAG215 and NTAG216 NFC tags with 144-byte user memory. Uses the same data format as the ACE-RFID project, ensuring compatibility with existing ecosystems. All processing happens on-device—your data never leaves your iPhone.
REQUIREMENTS
iPhone 7 or later with NFC capability running iOS 16.0 or later. You'll need blank NTAG215 or NTAG216 tags (widely available online). Note: Pre-programmed manufacturer tags may be write-protected.
FREE & OPEN
Based on the community-driven ACE-RFID project. No subscriptions, no in-app purchases, no data collection. Built by makers, for makers.
Start programming your filament tags today and take control of your 3D printing workflow!
Betyg och recensioner
Det visas ingen översikt eftersom den här appen inte har fått tillräckligt många betyg eller recensioner.
New Settings Screen
• Customize default spool size
• Choose temperature units (°C or °F)
• Toggle auto-verify after writing
• Control haptic feedback
• Debug information option
Tag Details Display
• View tag memory usage with color-coded progress bar
• See tag UID and type information
• Track when tags were last read
• Beautiful visual presentation
Improvements
• Settings are now saved between sessions
• Better control over NFC operations
• Enhanced user experience
Utvecklaren Martin Bogomolni har meddelat att appens integritetspraxis kan omfatta hantering av data enligt beskrivningen nedan. Mer information finns i utvecklarens integritetspolicy .
Data samlas inte in
Utvecklaren samlar inte in några data från den här appen.
Hjälpmedel
Utvecklaren har ännu inte uppgett vilka hjälpmedelsfunktioner som den här appen stöder. Läs mer
Information
- Storlek
- 3,1 MB
- Kategori
- Verktyg
- Kompatibilitet
Kräver iOS 16.0 eller senare.
- iPhone
Kräver iOS 16.0 eller senare. - Mac
Kräver macOS 13.0 eller senare och en Mac med Apple M1‑chip eller senare. - Apple Vision
Kräver visionOS 1.0 eller senare.
- Ålder
4+
- 4+
- Leverantör
Martin Bogomolni
- Martin Bogomolni har inte identifierat sig som en näringsidkare för den här appen. Om du är en konsument i det Europeiska ekonomiska samarbetsområdet (EES) gäller inte konsumenträttigheter för avtal mellan dig och leverantören.
- Copyright
- © 2025 Martin Bogomolni