TechRef
ISO-Toleranzen, mm & Zoll
Free · In-App Purchases · Designed for iPad. Not verified for macOS.
New in 2.1: engineering calculators, material tables, thread dimensions, inch fits and hardness conversion. Use your own values, save calculations and back up to iCloud.
The drawing says 50.000 +0.200 / -0.000.
The machine needs 50.100.
TechRef does that math, converts it into every unit, keeps the tables you reach for every day, and records what you measure. Built for the everyday questions on the shop floor.
WHY THE CENTER VALUE MATTERS
The center of an asymmetric tolerance is not the nominal size. TechRef calculates the true center and the full band, so you get it right in one setup.
TOLERANCES FROM THE STANDARD (TechRef Pro)
Pick an ISO 2768 class (f, m, c, v) or an ISO 286 fit (hole H7, shafts g6 to p6), and TechRef looks up the deviations for your size. Pick a shaft to see how it fits an H7 hole: clearance, transition or interference. Use ISO, JIS, EN, DIN or BS names.
ENGINEERING CALCULATORS (TechRef Pro)
• Section properties: A, I, Z, Ip and Zp for round bar, tube, rectangle and box section
• Tension, compression and shear stress
• Bending, torsion and combined stress, including von Mises
• Beam deflection: cantilever and simply supported, point or uniform load
• Weight of bars, tubes and plates
• Thermal expansion and thermal stress
Pick a material from the list to fill in density, E and α. Every result shows its formula. Metric (mm, N, MPa) or inch (in, lbf, psi).
REFERENCE TABLES
• Materials (TechRef Pro): 78 grades of stainless steel, steel, aluminium, copper, titanium, nickel, magnesium and plastics. JIS, AISI, UNS and EN names side by side, with density, E, α, strength and hardness
• Thread dimensions (TechRef Pro): metric 6g/6H and Unified 2A/2B limits of size
• Tap drills (TechRef Pro): metric, Unified and Whitworth, with minor diameter limits
• Tolerances (TechRef Pro): ISO 2768, ISO 286 and inch fits (ANSI B4.1: RC, LC, LT, LN, FN)
• Hardness conversion for steel (TechRef Pro): HRC, HV, HB, HRA, HRB, HS and approximate tensile strength, for reference
Values are compiled with reference to officially published standards information.
MAKE THE TABLES YOUR OWN (TechRef Pro)
Change a tap drill or a material value to the one your shop uses, add your own drills and materials, and add a memo to any row. Your values are shown in color. If TechRef later corrects a default you changed, the cell is marked so you can choose which value to keep. Your own materials appear in the calculators too.
RECORD WHAT YOU MEASURE
Add measured values to any point in a sheet. Each entry updates the count, mean, max, min, range, standard deviation, deviation from target, out-of-tolerance count, Cp and Cpk. Measured values are free and not counted toward the save limit.
INSPECTION SHEETS, HISTORY AND CSV
Create a sheet per part with points, each with its own dimension and tolerance. Save conversions and calculator results to History with a label and a memo. Export CSV per point or per measured value.
13 CATEGORIES, 100+ UNITS
Length, pressure, torque, force, temperature and more. Show only the units you use. Factors come from exact definitions, never rounded approximations. Tolerance bands are rounded inward, so a part inside the band on screen is inside it for real.
iCLOUD BACKUP
Sheets, history, settings and your own table values are backed up to your own iCloud, automatically or when you choose. Restore them on a new iPhone or iPad. The developer cannot see your data. No ads, no tracking, no analytics, no account.
FREE, AND TechRef Pro
Conversions, manual tolerances, drill charts, the cutting speed and feed calculator, Sheets, measured values, CSV export and iCloud backup are free. Saving dimensions has a limited number of free saves, then once per hour. TechRef Pro, a one-time purchase, removes the limit and unlocks the tables, tolerances from the standard, the engineering calculators and your own values. No subscription.
ALSO
10 languages · 1 to 6 decimal places · How to Use · Dynamic Type · Light and dark · iPhone and iPad
Ratings & Reviews
- This app has not received enough ratings or reviews to display an overview.
ENGINEERING CALCULATORS (TechRef Pro)
Section properties, tension, compression and shear, bending, torsion and combined stress, beam deflection, weight, and thermal expansion and stress. Pick a material to fill in density, E and α.
NEW REFERENCE TABLES (TechRef Pro)
Materials: 78 grades with JIS, AISI, UNS and EN names, density, E, α, strength and hardness. Thread dimensions: metric 6g/6H and Unified 2A/2B. Inch fits: ANSI B4.1 RC, LC, LT, LN and FN. Hardness conversion for steel, for reference.
YOUR OWN VALUES (TechRef Pro)
Change tap drills and material values to your own, add your own drills and materials, and add memos to any row. Manage them in Settings > Your Reference Values.
CALCULATIONS IN HISTORY
Save calculator results to History with a label and a memo.
iCLOUD BACKUP
Back up sheets, history, settings and your own values to your own iCloud, and restore them on another device. Free.
The developer, MASARU KATO, indicated that the app’s privacy practices may include handling of data as described below. For more information, see the developer’s privacy policy .
Data Not Collected
The developer does not collect any data from this app.
Accessibility
The developer has not yet indicated which accessibility features this app supports. Learn More
Information
- Size
- 6.1 MB
- Category
- Utilities
- Compatibility
Requires iOS 17.6 or later.
- iPhone
Requires iOS 17.6 or later. - iPad
Requires iPadOS 17.6 or later. - Mac
Requires macOS 14.6 or later and a Mac with Apple M1 chip or later.
- iPhone
- Languages
English and 9 more
- English, French, German, Italian, Japanese, Korean, Portuguese, Simplified Chinese, Spanish, Traditional Chinese
- Age Rating
4+
- 4+
- In-App Purchases
Yes
- TechRef Pro 2,99 €
- Provider
MASARU KATO
- MASARU KATO has identified itself as a trader for this app and confirmed that this product or service complies with European Union law.
- Address
〒160-0023
Tokyo Shinjuku-ku Soratobu Kenkyushitsu
2F Nishi-Shinjuku Mizuma Bldg.
3-3-13 Nishi-Shinjuku,
Japan - Phone Number
+81 8056260868 - Email
support@flyingdevlab.com
- Copyright
- © 2026 Flying Dev Lab / 空飛ぶ研究室
