Ham Satting

Amateur Radio Sat Tracker

Free

Ham Imaging is the picture side of amateur radio. Hold your phone to any receiver's speaker and watch slow-scan television pictures decode live, or transmit your own with your callsign printed on them - no interface box, no cables, no computer. RECEIVE - Live SSTV decode straight from your radio's audio through the device microphone - Automatic mode detection from the VIS header: leave it on Auto and the picture just appears - When the header was missed (the recording started late, or noise covered it), the picture is found by its line timing - 51 modes decoded and encoded: Scottie 1, 2, 3, 4 and DX; Martin 1, 2, 3 and 4; Robot 12, 24, 36 and 72; Robot B&W 8, 12, 24 and 36; PD 50, 90, 120, 160, 180, 240 and 290; Wraase SC2-30, SC2-60, SC2-120 and SC2-180; Pasokon P3, P5 and P7; MMSSTV's MP73 to MP175, MR73 to MR175, ML180 to ML320 and its six narrow-band modes; and FAX480 - The sender's FSK ID callsign is read when it follows a picture, and fills an empty callsign box - A live tuning meter and signal-confidence readout so you can peak the audio before the picture starts - Slant correction for the small clock differences that make a picture lean - The picture paints in as it arrives: you do not have to wait for the end of the frame TRANSMIT - Send any photo from your camera or gallery as an SSTV picture - Optional overlay printing your callsign, grid and a free text line onto the image - Pick the mode to suit the band and the time you have - Optionally end every picture with your callsign as an FSK ID, as MMSSTV sends it (off until you turn it on) - A progress bar tracks the transmission, and you can cancel at any point - Putting a signal on the air stays your decision: your radio's VOX or your hand keys it, or, with rig control (CAT), the app keys a supported radio for that one picture GALLERY & LOGGING - Everything you receive or send is kept together on the device with its mode and UTC time - Share a watermarked copy anywhere - Clean export: a plain copy at 800 px, exactly the format ARISS asks for in award submissions - Copy an ADIF line to paste an SSTV contact straight into Ham Logging or your desktop logger - Delete a single picture or clear the whole gallery. Nothing is ever uploaded BUILT FOR THE SHACK - Works fully offline: decoding and encoding never need an internet connection - Light and dark themes, adjustable font size, weekly tips and in-app version history - Your callsign and grid stay on your device - No account, no ads, no analytics and no tracking PERFECT FOR - Operators working the HF SSTV picture nets - Anyone chasing ISS / ARISS SSTV events and award submissions - Shortwave listeners who want to see what those warbling tones actually are - Newcomers who want to try SSTV without buying an interface - Clubs demonstrating amateur radio to visitors and students PRIVACY - Your callsign, grid and email are stored only on your device. - No account, no sign-up, no ads, no analytics SDKs, no advertising ID and no tracking of any kind. 73 de A41UX Yousuf AL Balushi - Unixeer, Oman

  • This app has not received enough ratings or reviews to display an overview.

The SSTV decoder is now Ham Imaging's: 51 modes, a picture found by its line timing when the header was missed, and the sender's FSK ID callsign. Your QSL card picture shows stronger, every setting has its (i), and UNNE-1B and HADES-L carry their OSCAR numbers. SSTV decoding - 31 new modes, 51 in all: MMSSTV's MP73 to MP175, MR73 to MR175 and ML180 to ML320, its narrow-band MP73-N, MP110-N, MP140-N, MC110-N, MC140-N and MC180-N, Martin 4, Wraase SC2-30, SC2-60 and SC2-120, Pasokon P3, P5 and P7, Robot B&W 8, 12, 24 and 36, and FAX480. The SSTV method list is grouped by family, with Auto first. - A header (VIS) now counts only when all of it is there. On twelve real recordings, 6.0.0 called seven of them "Robot 12", wrongly, and stopped at an unknown header code on two; 6.1.0 names the right mode in all twelve, and on a thirteenth, too weak to read, says no picture was found instead of drawing noise. - When the header was missed (the recording started late, or noise covered it), the picture is found by its line timing, and the line under it says so. A mode you pick by hand needs no header. - A picture received off tune is put back in tune before it is drawn. - When MMSSTV's FSK ID follows a picture, the sender's callsign shows under it, as "From F1THK (FSK ID)", and goes with the picture when you save or share it. - A long recording is searched whole: a picture after nine minutes of hiss is found. QSL cards - Your own background picture shows stronger: the card's colours now lie over it at 40% (they were 62%), and the words have a soft shadow, so they stay readable. - The (i) of QSL card background gives the best size (1200 x 520 pixels, about 2.3 : 1) and formats (JPEG for photos, PNG for logos and artwork - a PNG's clear parts show the card's colours; up to 40 MB), and shows your picture in its corner. Settings - Every setting now has its (i), in all ten languages. The (i) boxes scroll on a small screen with large text: the N2YO key's box no longer runs off the screen there, and the link in the APRS box fits. - What you were typing is kept when you leave the app from the app switcher. On an iPhone, number boxes have a keyboard with a return key - the Duration (hours) boxes of One Sat and Many Sats too. - Default Grid Location is now checked: a grid of 4, 6, 8 or 10 characters, or latitude, longitude. A half-typed grid is no longer stored, and the box says why. Satellites - UNNE-1B is now SO-131 and HADES-L SO-132 (AMSAT, 15 November): in the app they are "UNNE-1B (SO-131)" and "HADES-L (SO-132)", and their AMSAT status dots work. Contacts and choices saved under the old names still find them. - Fresh orbit figures for nine satellites, from their elements of 17 November.

The developer, Yousif AL Balushi, indicated that the app’s privacy practices may include handling of data as described below. For more information, see the developer’s privacy policy .

  • Data Not Linked to You

    The following data may be collected but it is not linked to your identity:

    • Location
    • User Content

Privacy practices may vary based, for example, on the features you use or your age. Learn More

The developer indicated that this app supports the following accessibility features. Learn More

  • Supported Features

    • Larger Text

    • Dark Interface

Provider
Yousif AL Balushi
Size
32.7 MB
Category
Utilities
Compatibility
Requires iOS 15.6 or later.
  • iPhone
    Requires iOS 15.6 or later.
  • iPad
    Requires iPadOS 15.6 or later.
  • iPod touch
    Requires iOS 15.6 or later.
  • Mac
    Requires macOS 12 or later.
Languages
English
Age Rating
4+
Copyright
© 2026 Unixeer