simos.app is a diagnostic, data logging and flashing tool built specifically
for VAG petrol engines running Simos 18.1, 18.2, 18.6, 18.10 and Simos 12.1
ECUs. The platforms found in most modern TSI and TFSI engines across
Audi, VW, Škoda, SEAT, Cupra and Porsche.
LIVE DATA LOGGING
Read ECU parameters directly in real time. Monitor boost pressure,
injection timing, lambda, temperatures, torque and more at high
sample rates over a Bluetooth LE connection.
ECU IDENTIFICATION
Read software versions, calibration IDs and hardware info straight
from the control unit.
LOG ANALYSIS
Visualize recorded sessions with multi-channel graphs. Spot
correlations between parameters without leaving the app.
FLASHING
Update your ECU and TCU to the latest version for your vehicle or flash a custom tune.
Full features available for Simos 18.1/18.10 and 18.6.
Flashing stock files or pre-unlocked ecus for Simos 18.2, 18.4, 18.41 and Simos 12.1.
––
Built for enthusiasts, tuners and workshops who need more than a
generic scan tool. Basic knowledge of ECU diagnostics is recommended.
This app is for informational and diagnostic purposes only. Any
modifications to vehicle systems are the sole responsibility of the
user and must comply with local laws and regulations.
––
Bluetooth LE OBD adapter required.
Get yours here: https://simos.app/dongle
Other compatible adapters: Macchina A0, DIY A0 clone https://github.com/Switchleg1/AMAleg require custom firmware: https://simos.app/dongle/firmware
評分與評論
此 App 尚未收到足夠的評分或評論,無法顯示概覽。
- DQ500 (0DL): CAL and full flashing (beta)
- AQ250 Gen1 (09G, KWP2000): full flashing (beta), M32R and SH-2 builds
- DQ381 full flash asks for confirmation first (beta); BOOT and ASW flashing needs dongle firmware v1.12 or newer
- Flashing is free for ECUs with a blank or unreadable VIN, so a failed flash can always be recovered
- CarPlay: gauge tiles show the recorded min and max as numbers
- AQ250 / AQ300 / AQ450 (Aisin AW): own Mode 22 logging with turbine and output speed, ATF temperature, converter slip, gear, lock-up and solenoid currents
- New DSG Basic Setting (DQ250 MQB, 0D9): relearns the shift actuator and synchroniser positions with the engine idling, with progress and step-by-step hints
- Reset DSG Adaptations: frees a routine left over from an earlier run, waits for the TCU to finish, and errors now say what to do
- DSG Basic Setting and Reset DSG Adaptations now only show for DQ250 MQB (0D9) TCUs
版本 1.9.18
開發者Tycho Sebastian Holzer指出App的隱私權實務可能包含下方描述的資料處理。如需更多資訊,請參閱 開發者的隱私權政策 。