New function - A function to hide error/alert messages at the top of the screen has been added. Minimize/Hide can be selected by tapping the left end of the message display area. Maintenance items - In the ST IN1/2 module, the R channel assignment for INPUT A would not be applied correctly. This has been fixed. - Assigning 25 or more modules to a DCA would cause the application to crash. This has been fixed.

Supported the power-redundant models TASCAM Sonicview 16dp and TASCAM Sonicview 24dp

Maintenance items - When the RTA function on the GEQ Screen was turned on, the RTA bar meters would not be displayed at the bottom of the MODULE (GEQ) Screen. This has been fixed. - When “INPUT B” was selected as the input source for the ST IN1-2 modules, the input source on the Home Screen would sometimes not be correctly displayed. This has been fixed.

- When this app was newly installed on iPadOS 18, the Sonicview unit would sometimes not be detected because device search on the local network was turned off. This has been fixed so that a pop-up asking for permission to detect devices will now be displayed. - On the Sonicview Control app HOME screen, the values shown in the ANALOG GAIN input fields for the SB-16D connected to the Sonicview unit would sometimes differ from the actual setting values. This has been fixed.

New functions - New functions added in the main unit firmware (V2.2.0) are now supported. Maintenance items - Operation stability has been improved.

- Compatibility with the TASCAM IF-ST2110 card has been added. - AUTO MIXER function has been added. - LABEL SETUP function has been added. - Return talkback function has been added. - The AVAILABLE MEMORY item has been added to the INFORMATION screen. - Operation stability has been improved.

New functions - Audio Follow Video functions newly added. - OA Tally Inhibit Settings has been added to the Preferences screen. - Monitor Add function newly added. This allows for the mixing and monitoring of multiple sources. - Location settings are now available in the Monitor screen. - The LOCK SETUP screen has been redesigned. This allows more detailed settings of lock items. - The Version Information screen has been redesigned,  - The following functions have been added to the Talkback screen: - "DIM" display function added when DIM is enabled. - Talkback input location settings are now available. - MON1/2 location display has been added. Maintenance items - Improved meter display. - Operation stability has been improved.

Maintenance items - On the Dante SETUP I/O Device tab, when mounting an SB-16D unit as the 3rd or later Mounted Device, the port name on the IF-DA64 inserted in SLOT1/2 would change to SB-16D. This has been fixed.

New functions - User Key can now be operated when connected remotely. - Libraries (EQ, Gate, COMP, GEQ, FX, and each module library) can now be operated when connected remotely. Maintenance items - When connected to the TASCAM Sonicview, controls from the application were sometimes not properly reflected in the Sonicview unit. This has been fixed. - Operation stability has been improved.

New functions - User Key can now be operated when connected remotely. - Libraries (EQ, Gate, COMP, GEQ, FX, and each module library) can now be operated when connected remotely. Maintenance items - When connected to the TASCAM Sonicview, controls from the application were sometimes not properly reflected in the Sonicview unit. This has been fixed. - Operation stability has been improved.

- During remote connection, the Snapshot STORE/RECALL Confirmation settings of this software and the TASCAM Sonicview unit were not interlocked. This has been fixed. - Operation stability has been improved.

New function - Coordinated functions with TASCAM IF-MTR32 units are now supported. Maintenance items - Analog Gain, Pad and HPF could not be copied with the Copy Module. This has been fixed. - Analog Gain, Pad and HPF could not be stored or recalled with the Library Module Input of the Module Library. This has been fixed. - When “INPUT/OSC PARAMETERS” had been checked on the PARAMETER SAFE page of the SNAPSHOT RECALL SAFE screen, Recall Safe was also enabled for Insert On/Off and Insert Point. This has been fixed. Now that the function is fixed, checking “Insert Routing” will enable Recall Safe for these. - When “EFFECT SETTINGS” had been checked on the PARAMETER SAFE page of the SNAPSHOT RECALL SAFE screen, Recall Safe was also enabled for parameters related to Gate/Expander/De-Esser, Comp/Ducker, and Delay. This has been fixed. Now that the function is fixed, checking “Other Module Parameters” will enable Recall Safe for these. - When“INPUT ROUTING / CH STEREO LINK / SEND PARAMETERS” had been checked on the PARAMETER SAFE page of the SNAPSHOT RECALL SAFE screen, Recall Safe for PAN/BAL was also enabled. This has been fixed. Now that the function is fixed, checking “ Other Module Parameters” will enable Recall Safe for these.

- When a snapshot saved in OFFLINE EDITOR mode was recalled in OFFLINE EDITOR mode, custom layer settings would not be restored. This has been fixed. - In V1.1.0, the machine name would not be correctly saved in ALL SYSTEM DATA. This has been fixed. - Operation stability has been improved.

・Support for SB-16D control from Sonicview Mixers. ・Information screen is now available. ・Adds a SOLO button control on each channel module. ・Operation stability has been improved.