Changes in the iOS app v2025.3.0 are: - Add: Show 'Ready to Unpack' items in Refill - Add: Show store-level quantities in Availability - Add: In-App tutorials for Availability, Refill and Refill from Shipments - Update: Zebra RFD40 firmware update to PAAFKS00-009-R00 - Update: Renamed ‘markdown' tile in Refill to 'for peak’ - Fix: Incorrect total refill suggestion quantity after filtering - Fix: Search article button sometimes not shown in Refill (e.g. on iPads) - Fix: Incorrect message could be displayed when offline showing date/time is incorrect - Fix: Country mapping for French Guyana on Zebra readers

Changes: - Fixes forced re-registration after offline start of app

Changes in 2025.2.0: Add: Setting to require 'select shipment notices' (disables blind receiving) Add: Setting to change used channels in Zebra readers to prevent interference issues with EAS systems Add: Firmware version FW20240923 is now supported for the Bluebird RFR901 Fix: Misaligned dots in Refill on iPad Fix: On Display items not shown correctly in Refill Fix: Remove Refill from Shipment toggle in the functionality menu in the app Fix: Wrong size printed on label when no size was specified for the store's country_code Fix: 'Show suggestions' button added to Refill filter screen

Changes in 2025.1.1: - Enable DPO for Zebra readers to increase count performance: By enabling the Dynamic Power Output (DPO) for the Zebra readers, we see an improved performance during an RFID Count when using a Zebra reader. Several tests have been performed using the feedback we received from the community and having DPO enabled showed an improved performance during our tests. These tests have been conducted in collaboration with Zebra. - Improved stability when displaying data in Availability v2: In our monitoring we noticed some crashes for articles where a very large size range needed to be loaded in Availability v2. This has now been improved.

Add: Availability v2 Add: Nearby Stores Filter on masterdata Add: Move from Refill GTIN Filter Updated: Firmware Zebra RFD40+90 FW08-R00 Fix: Prevent pending shipments when a 400 error was returned Fix: Prevent receiving shipment notice twice due to network issues Fix: ‘App Themes’ (backgrounds) were not loading correctly Fix: Reader connection drop during a count

Bugfixes and improvements

Changes: - Added Refill from Shipments - Added Refill from Barcode - Improved Refill feature - Added rate limit support - Added various new article statuses - Fixed crashes in reader, printer, shipments etc.

Changes: - Fix crashes in Search - Fix RFD8500 incorrect reader state issues - Fix crash while fetching SATO printer status - Fix crash when scanning GIAI tags - Fix disable 2d barcode move per setting - Fix handling empty tags

Changes: - Added: 2D Barcode Move. - Added: Batch print. - Added: Serbian (Latin) language. - Added: Option to prevent certain labels to be (re)programmed. - Added: Tutorial for Search. - Change: Minimum required OS version is now iOS 15. - Change: Removed unsupported TSL readers, only the TSL1128 is supported from now on. - Fix: Assign status 'Reserved' ends up as 'Reserved for Peak'. - Fix: Store-to-store transfers not possible when nearby stores filter is activated. - Fix: Several bug fixes and performance improvements. Version is 2024.1.2 due to a last-minute critical bugfix

Changes: - Fix: Update max results in article list via managed setting - Fix: Refill target location screen is empty - Fix: Barcode scanner should reactivate after timeout - Fix: Display Batchcode when article code is missing - Fix: Search with barcode missing helper text - Fix: Crash when loading Move - Fix: Remap San Marino to Italy (Zebra + ID Hand) - Fix: Remap Andorra to Spain (ID Hand) - Fix: Incorrect scaling of helper image - Fix: Frozen helper animations on iOS12 - Fix: Prepare helper scales wrong - Fix: GS1 CPL database crash

- Add: New design for RFID Search (beta) - Add: Support for Bluebird RFR901 (beta) - Add: Open 'Move' from 'Refill' - Add: New 'Move' overview screen, allowing removing entries - Add: New article synchronization process (incl. support for deleted articles) - Add: several UI enhancements - Add: Improved 'Program' for Zebra RFID readers - Add: Portuguese - Add: more item statuses in 'Identify' - Update: Size sorting logic in Refill and Availability

Changes: - Fix: Use of expected stock file in Count to calculate the progress percentage. In some cases when a team count was done using ERP files, it was possible that two devices showed a different progress percentage. This issue should be resolved with this release. - Fix: Crash in Identify when scanning incorrect programmed tags - Fix: In 'Add to Display' when a dialog was shown, the RFID reader was unresponsive - Fix: Updated Korean and Japanese translations

Changes: - Add discover - Add animated tutorials - Add count progress per sublocation for realtime stores - Add Nearby stores filter in Incoming shipments - Add RFD403x `005.R05` firmware - Fixed many issues and improved stability overall

Changes in iOS app v2023.1.1: - Add: Zebra RFD8500 008.R01 firmware (this will trigger a firmware update) - Fix: Write issue showing ‘false positives’ for Zebra RFD8500 (fixed by upgrading the Zebra SDK) - Fix: Start barcode scanning with camera if no RFID reader is connected - Fix: Allow Zebra RFID readers to use Macao regulation - Fix: Limit camera to nearby focus only - Fix: ‘Identify’ showed technical details of a previously scanned QRcode/Data-matrix - Fix: In showcase items part of store stock are not filtered out in Pickups feature - Fix: Double trigger of press doesn't trigger barcode scanning again - Fix: Reader icon on/off not responding in Identify for TSL RFID readers - Fix: Improved program functionality for Zebra RFID readers - Fix: Improved destroy functionality for Zebra RFID readers

Changes in iOS app v2023.1.0: - Add: Additional App Themes (Boutique, Sport, Urban) - Add: Language Traditional Chinese - Add: Offsite storage sublocation type to Incoming Shipments - Add: Refill suggestions from Offsite storage with Calculated Stock is now enabled - Add: Ability to switch to a different scanner method in program and search - Add: Scan-Scan-Write prepared labels are recognized as empty in search and filtered out in Count/Prepare/Move/Receive/Pickups/Offsite - Add: The option to click on a search list belonging to a scanned article on Prepare, which will open the instructions screen - Fix: Outgoing Shipments now also lists the available shipment notices based on the managed setting - Fix: After an RFID reader was reconnected on the Identify article screen, the reader became unusable - Fix: Reader activity status when navigating back and to prepare scan screen - Fix: Partial count progress per sublocation when counting against realtime stock - Fix: Different devices could show different count percentages - Fix: Wrong error message for Print Station & keyboard popping up in loading screen - Fix: Refactored the SATO printer implementation to prevent crashes on iOS 16 - Update: Zebra RFID reader regulation mapping; extend country list for ETSI and FCC fallback - Update: Navigate destroy back to first scan screen instead of home screen of the app - Update: iOS 10 and iOS 11 are no longer supported and minimum iOS version is 12 or higher - Additional small bug fixes and improvements

Changes in the iOS app V2022.4.1 are: - Fixed: Not yet counted list progress was incorrect after moving items (only applicable when counting against iD Cloud Realtime Stock). - Fixed: App crashes when trying to program a label on very slow WiFi. - Fixed: App crashes when finishing receiving if an unknown article (GTIN) was present in the shipment notice. - Fixed: App could crash in Map view in Availability. - Fixed: App sometimes incorrectly showed 'Count still active' notification.

- Added Scan-Scan-Write - Added Canadian French - Renamed to "iD Cloud" (also new app icon) - Choose sublocation before programming - Improved status management - Improved article descriptions throughout - Zebra RFD40 firmware upgrade to 003.R03 - Many minor stability and feature improvements

Changes in iOS app v2022.3.2: - Fixed: issue that made it impossible to destroy certain labels. Changes in iOS app v2022.3.1: - Fixed: issue that made it impossible to receive shipments. Changes in iOS app v2022.3.0: - Added: Support for Zebra RFD4031 Premium Plus - Added: Zebra RFD8500 Firmware upgrade to 006.R78 - Added: Zebra RFD403x Firmware upgrade to 002.R03 - Added: Search bar in select shipment notices in receive - Added: Allow refill from offsite storage to stockroom sublocation types (not in combination with calculated stock as datasource) - Added: Blacklist offsite storage stock in holding store for Prepare and Move - Updated: Increased maximum allowed length of external reference in outgoing shipments - Stability and performance improvements

Changes in iOS app v2022.3.1: - Fixed: issue that made it impossible to receive shipments. Changes in iOS app v2022.3.0: - Added: Support for Zebra RFD4031 Premium Plus - Added: Zebra RFD8500 Firmware upgrade to 006.R78 - Added: Zebra RFD403x Firmware upgrade to 002.R03 - Added: Search bar in select shipment notices in receive - Added: Allow refill from offsite storage to stockroom sublocation types (not in combination with calculated stock as datasource) - Added: Blacklist offsite storage stock in holding store for Prepare and Move - Updated: Increased maximum allowed length of external reference in outgoing shipments - Stability and performance improvements

Changes in iOS app v2022.3.0: - Added: Support for Zebra RFD4031 Premium Plus - Added: Zebra RFD8500 Firmware upgrade to 006.R78 - Added: Zebra RFD403x Firmware upgrade to 002.R03 - Added: Search bar in select shipment notices in receive - Added: Allow refill from offsite storage to stockroom sublocation types (not in combination with calculated stock as datasource) - Added: Blacklist offsite storage stock in holding store for Prepare and Move - Updated: Increased maximum allowed length of external reference in outgoing shipments - Stability and performance improvements

Changes in iOS app v3.20: - Added: New feature: Pickups - Added: New feature: Add and remove ‘On display’ - Added: Support for Zebra RFD8500 v72 firmware - Added: Extended support for shipment type functionality - Added: Ability to deselect selected shipment notices in Incoming Shipments - Added: Setting to disable ‘print missing labels’ in Incoming shipments - Fixed: Article synchronization loading issue in Move - Fixed: Show location name instead of location identifier in Identify technical details

Changes in iOS app v3.19: - Add: Size Range Targets in Refill - Add: Single Sign On in the app - Add: Additional support for statuses in Assign Status - Add: Setting to hide menu tiles ‘all’, ‘empty’ and ‘manual’ in Program, Print and Search - Add: Support for WebP images in the master data - Add: Show article code when basic article information is shown, for example in Search - Remove: Ability to Program / Print / Search / Prepare based on an unknown GTIN. Article needs to be present in the master data to be able to use in these features. - Fix: Sort stores in stores selection screen alphabetically - Fix: Printer IP and port labels are now visible on all devices - Fix: Issue in Refill when no ‘code’ field was present in the master data - Fix: Availability now groups sizes within an article based on ‘SKU_code’

Changes in iOS app v3.18.3: - Fixed: beeping feedback in Search did not work - Fixed: crash in Identify - Fixed: improved behavior of the synchronization notification bar - Fixed: crash in Display Compliance when code value was missing in the master data

New in iOS app v3.18.2: - Fixed: Printing labels for shipments could crash with a specific ZPL template - Fixed: +/- buttons in Print article amount selection screen did not update the print button - Fixed: Japanese RFD8500 integration is now working properly - Fixed: Don't show the keep/discard scanned items in shipments pop-up within the first two hours of when the items were scanned - Fixed: Some minor bugs Changes in iOS app v3.18: - Added: Ability to receive unexpected shipments - Added: Option to show 'overs' during an RFID count - Added: Print remaining labels after receiving shipments - Added: Show article image during search - Added: New help screen for Reader Connect, to help users connect via Bluetooth settings menu - Added: Long press on option name in shipments opens article details screen - Added: Support for Japanese Zebra RFD8500 (Region 3) - Fixed: Display Compliance will now show the correct amount of available sizes - Update: In features like Refill and Display compliance the 'Option' field is used to display the article description. - Update: Loading screens have been added to Identify, Print and Print station to provide better user feedback - Update: Display Compliance now shows size availability from Availability instead of size information from Identify - Update: Map details are now always shown in Availability even if no nearby stores are available - Update: Company prefix length database is now included in the app itself - Update: Printer section on the status screen is only shown when the print tile is enabled or a printer is connected - Several small improvements and bug fixes

Changes in iOS app v3.18.1: - Added: Ability to receive unexpected shipments - Added: Option to show 'overs' during an RFID count - Added: Print remaining labels after receiving shipments - Added: Show article image during search - Added: New help screen for Reader Connect, to help users connect via Bluetooth settings menu - Added: Long press on option name in shipments opens article details screen - Added: Support for Japanese Zebra RFD8500 (Region 3) - Fixed: Display Compliance will now show the correct amount of available sizes - Update: In features like Refill and Display compliance the 'Option' field is used to display the article description. - Update: Loading screens have been added to Identify, Print and Print station to provide better user feedback - Update: Display Compliance now shows size availability from Availability instead of size information from Identify - Update: Map details are now always shown in Availability even if no nearby stores are available - Update: Company prefix length database is now included in the app itself - Update: Printer section on the status screen is only shown when the print tile is enabled or a printer is connected - Several small improvements and bug fixes