Features: • Digital Flight Envelope • Crews can attach and manage digital documents directly within a flight. Photos of any paper document can be captured or selected on-device and archived together with the rest of the post-flight data upload • Trip Log - RVSM Pre-checks section • A new Pre-checks section has been added to the Trip Log Departure tab. The section contains an RVSM (Reduced Vertical Separation Minimum) checkbox whose value is submitted to the Post-flight Data API as part of the trip data upload • Single Sign On (SSO) • Full SSO integration is available for operators using Community Portal identity. The authentication flow has been redesigned to streamline the login experience The first view in the authentication flow is now the login page itself, presenting both “Sign in using SSO” and username/password options side by side. The separate company selection page has been removed; company code selection is now embedded within the manual auth inputs or the SSO login path • OFP Author \ Dispatcher in Post-Data API • The post-flight data API upload now includes the dispatcher / OFP author name, extracted from the AuthorInformation block of the ARINC OFP XML. • Flightscape Branding • “CAE eFlight Manager” has been changed to “Flightscape eFlight Manager” • Night Landing • Changed "Night Flight" toggle to be more specific, now called "Night Landing" to indicate flights that have landed at night Fixes: • The application occasionally could crash when attempting to load the SIG Wx MID weather layer • The Flight Level slider for the Wind at 5000 ft layer was constrained around the average flight level, making FL050 unselectable on high-altitude routes • Pinching the keyboard to compact mode in the Trip Log left the compact keyboard unresponsive to keypresses • A manually marked NOTAM was silently discarded when a NOTAM refresh was triggered before changes were published • The weather indication display was interpreting METAR 9999 visibility as ‘bad conditions’ • When attempting to mark a NOTAM text a context menu could obscure ‘Mark text’ button • Entering multi-line text in the Trip Log ATIS and clearance boxes caused the second line to be cut in half and the third line to be invisible on iOS • The Loadsheet document list was not updated when new documents arrived from the server while the empty list view was already open • Non-dismissible modal dialogs could be accidentally closed by tapping in the gap between the dialog content and the action buttons

Features: - Weight & Balance: - The Sign Off module is split into Crew Fitness and Flight Acceptance in the new Sign Off section. - A new Weight & Balance module allows viewing and signing payload documents. - Expected documents can be configured to prevent signing if one of them (e.g., Loadsheet) has not been received. - Payload documents sent to the ingest will quickly arrive at their flight, triggering a "new documents" notification. - Signatures for payload documents can be accepted or rejected by the operator; the response should arrive in eFM quickly. - Operators can be configured to not require acceptance or rejection of payload document signatures, in which case they will automatically be treated as accepted upon signing. - A history of signature attempts, along with crew name, crew ID, accepted/rejected date, and signed documents, is available in the Trip Log Summary under the Signatures tab. - Unsigned latest documents are also shown in the Trip Log Summary. - Flight Details: - The Flight Recalculation view has been redesigned to have all input fields in a separate section below the read-only tables. - The RCFP Popup can now include a more detailed fuel ladder section. - Weather: - Runways now show both true and magnetic bearing. - Airport header now shows coordinates and magnetic variation. Fixes: - The notification bell in the flight management screen sometimes showed flight-specific information, while it should only show general device notifications. - The Remarks section was not shown in the Critical Fuel module. - For new flights, the app no longer shows "0001-01-01" as the last update timestamp for flight sync data categories that do not have data. - The extra fuel breakdown info view now includes additional remarks again. - The extra fuel breakdown is now shown in the online recalculation view as well. - When the next/previous flight option is used to switch flights, the notification bell now shows entries for the correct current flight.

Defects DE13358 TripLogSummary - missing data [00596722]/missing data in trip log -> fuel checks after reentering the flight/moving to next flight DE12408 App becomes unresponsive/crashes when flight receive updates while being open on 'Flight Details' module DE13137 First page of oceanic clearance becomes empty after switching between pages/Second page of the oceanic clearance is not stored in db DE13231 [iOS] App crashes in ScratchPad -> clear/do/undo for an empty image DE13232 [iOS] TripLog -> NavLog -> app can crash when switching between fuel/altitude and actual time fields DE13233 [iOS] Flight Details -> recalc -> crash when pasting text to ‘duration’ fields DE13234 [iOS] Flight Details -> possible crash when exiting the flight while data is still loading DE13236 [iOS] Possible crashes in Notam module (scrolling while data is refreshing) DE13238 [iOS] Crash when trying to archive/delete/view flight from nag popup when the popup was displayed for a longer time DE13241 [iOS] Native exception - ViewController class TitleRowView overrode -title and returned a value of class UILabel, that is not a subclass of NSString - crash DE13245 [iOS] Possible crash during Crew data update (after sequence of operations -> open flight -> go to trip log -> go to Sign Off module) DE14402 A possible crash when flight sync is updating while logging out DE14418 Terrain - Improved the message when missing an M2 report to reduce confusion DE14383 Blocks performing Device Sync temporarily after recalc fails to refresh briefing package DE13438 Device sync - Datalink not synced when the associated drawing field was not modified DE13490 Trip log -> NavLog -> when waypoints filtered to 'Notes' -> WPT cannot be navigated using the filtered list DE13620 Notams not properly shown when multiple sectors selected DE14413 Notams - airspace group names are not properly displayed after selecting sectors DE13769 Flight management view not refreshed after rostered flights were downloaded DE14108 Trip log -> NavLog -> sometimes selection of NavLogNavItem does not scroll associated Waypoint details to the view DE14467 Device sync confirmation popup - the message is not fully shown

Defects DE13358 TripLogSummary - missing data [00596722]/missing data in trip log -> fuel checks after reentering the flight/moving to next flight DE12408 App becomes unresponsive/crashes when flight receive updates while being open on 'Flight Details' module DE13137 First page of oceanic clearance becomes empty after switching between pages/Second page of the oceanic clearance is not stored in db DE13231 [iOS] App crashes in ScratchPad -> clear/do/undo for an empty image DE13232 [iOS] TripLog -> NavLog -> app can crash when switching between fuel/altitude and actual time fields DE13233 [iOS] Flight Details -> recalc -> crash when pasting text to ‘duration’ fields DE13234 [iOS] Flight Details -> possible crash when exiting the flight while data is still loading DE13236 [iOS] Possible crashes in Notam module (scrolling while data is refreshing) DE13238 [iOS] Crash when trying to archive/delete/view flight from nag popup when the popup was displayed for a longer time DE13241 [iOS] Native exception - ViewController class TitleRowView overrode -title and returned a value of class UILabel, that is not a subclass of NSString - crash DE13245 [iOS] Possible crash during Crew data update (after sequence of operations -> open flight -> go to trip log -> go to Sign Off module) DE14402 A possible crash when flight sync is updating while logging out DE14418 Terrain - Improved the message when missing an M2 report to reduce confusion DE14383 Blocks performing Device Sync temporarily after recalc fails to refresh briefing package DE13438 Device sync - Datalink not synced when the associated drawing field was not modified DE13490 Trip log -> NavLog -> when waypoints filtered to 'Notes' -> WPT cannot be navigated using the filtered list DE13620 Notams not properly shown when multiple sectors selected DE14413 Notams - airspace group names are not properly displayed after selecting sectors DE13769 Flight management view not refreshed after rostered flights were downloaded DE14108 Trip log -> NavLog -> sometimes selection of NavLogNavItem does not scroll associated Waypoint details to the view DE14467 Device sync confirmation popup - the message is not fully shown

Features - Device Sync - Auto-registration for iOS - Added a feature to remind pilots about flights with unarchived trip log data - Once configured, reminders will start for flights that have been edited using 7.10 version of the app (edits made using 7.9 or earlier won't trigger reminders) - Added a clear option to the date time control - Added a clear option on trip log waypoints - Open or view waypoint notes directly from the waypoint in Trip Log - Show oceanic clearance scratchpad on flights that cross areas other than NAT - Signature panel display zooms to fit the signature - Display scratch pad info as part of trip log summary - Allow configuring TAF highlighting by cloud type - Postflight API - added fields to help determine which flights contain archived data - Display airspace name in the NOTAM heading Defects - Runway Data Incorrect – “Old” Runways Still Visible in Client - eFM Flight Summary Shows Incorrect Release Version under "Acceptances" - Take off time not updating the NavLog page - Airport list not populated on weather module after initial flight opening - NOTAM mark text function does not mark last character - Tab content is overlapped by the flight header when the content is pushed up by the keyboard opening - 2 waypoints marked as check waypoint after addition and removal of a flight diversion - There is no 'Delete' button for Delays - Small UI fixes (iOS)

- Adjusts the fuel loss calculation to be correct even in situations where FPM configures Fuel on Board to not contain certain fuel values (contingency, etc.) - Fixes issue where sometimes trip log OOOI time adjustments were not properly reflected on waypoints in the nav log

• General Stability improvements • Trip log summary -> NavLog -> Actual vs Estimated time is displayed incorrectly when the actual time is earlier than the estimated time (an additional hour of difference) • Trip log -> 'Set Current Time' sets time with precision up to minutes now (fix for incorrect time differences (+/- 1 minute) shown in trip log summary) • Inconsistency in font color of closed flights on flight management list view

- The Trip Log Summary module has been introduced to allow users the ability to view any Postflight data that has been archived by the flight crews on the eFM servers in a “human readable” format. - The Crew rest section in the Trip Log allows tracking rests for crew members. The section displays all the rostered crew members plus anybody that was not rostered on the flight but has downloaded the flight briefing package, added themselves to the flight crew and has signed and archived a Crew Fitness declaration. - Improvements were made to the logic of assigning Pilot Flying & Pilot Monitoring in Trip Log UX General Items: - Improved support for external keyboards in TripLog module (tested mainly on Apple Magic and Logitech keyboards but should work on most others) - Fields can be entered by tapping "anywhere" within them; touch area was increased. - ‘Tapping return/enter to exit fields’ - more consistent behaviour across the app - Trip Log -> NavLog -> ‘Show Details’ section header/expander no longer overlaps fields when on-screen keyboard becomes hidden in landscape orientation. - Trip Log -> NavLog -> ‘Show Details’ section header/expander might overlaps fields when on-screen keyboard is open in landscape orientation. Other Fixes/Changes - App no longer crashes when popups/dropdowns are reopened "quickly" - Fix for 'Restricted areas' layer not being presented on Vertical Profile. - Fix for issue where fitness & acceptance menu status sometimes was not properly updated after a recalc - Fix for not syncing crew member ID of a member created on the device - Other, smaller fixes/adjustments discovered during internal regression testing

- Fixed an issue where 7.8.1 upgrade was causing devices to have to re-register due to one-time keychain loss, associated with app transfer Previous version notes: - Fix for Briefing Package module showing blank when offline (DM integration only) - Fix for Trip Log module Nav Log tab where sometimes updating the OOOI times isn't updating the times in the Nav Log - General performance & flight sync improvements

- Fix for Briefing Package module showing blank when offline (DM integration only) - Fix for Trip Log module Nav Log tab where sometimes updating the OOOI times isn't updating the times in the Nav Log - General performance & flight sync improvements

- Fixed several intermittent crashes throughout the application - eFM Core Download Optimizations - eFM Core Station Mode support - Trip Log Alternates additional information - EASA recalc features - Changing map rendering to only show graphical weather within the flight window. Will not render older products on the map - Flight synchronization optimizations - Adding additional status information on the module menu for modules that don't have data for some flights - Ability to skip the homepage when entering a flight (ask customer support to configure this) - Flight deletion optimizations - Allow entering numeric values based on region settings (comma instead of dot for decimals, etc.) - Improved health check logic to prevent client from thinking it's offline in poor network conditions - Various defect fixes

- Flight Details module: EASA compliance for offline recalc (Discretionary Fuel, No Alt Fuel) (TF223403) - Sign Off module: Crew ID now shows in the nav menu for manually added crew (TF231753) - Weather module: FIR tab can now be hidden by request (TF233896) - Scratch Pad now uses the same drawing/text inputs as Trip Log (US1512320) - Header Menu (TF231751) o New design of the header menu to reduce confusion around transmit logs vs trip log upload o Estimated times can now be configured to display in the header instead of scheduled - Various performance improvements particularly around module and data load times (addresses DE244821 and DE244823) - Various defects have been fixed o Fixed an issue with Flight Time & Block Time calculations introduced in 7.5 (DE250735) o Fixed an issue with the set current time button not working properly (DE250740) o Fixed an issue where Vertical Profile would sometimes not display properly (DE234885) o Adjusted scrolling behavior in nav log to avoid jumping to previous waypoints (DE242784) o Fixed various random crashes, particularly when changing modules (DE242774) o Fixed an issue where the remarks section was not resizing properly (DE242771)

- Client changes to support data center migration - CAE Branding changes - Fixes for the following defects: - In situations where iOS application is on a network but has no internet, adjusted the health check timeout to avoid excessive delays - Signoff Indicator not updating correctly when changing sectors via next/prev sector buttons - Map: Fixed some cases where Vertical Profile would not show up as expected - Map: SigWx Mid & High are now rendered on separate layers - Map: Restricted areas use ETD/ETA instead of STD/STA

- Improved performance of the downloaded flight list, loading of the sign off module, the load time for a flight after tapping “View”, and various general improvements - Fixed an issue where the crew database could get into a state where it was inaccessible, causing problems in the sign off module and trip log - Fixed an issue where data entry could “flicker” between current and previous values. Text input now “commits” when the input loses focus - Fixed an issue where flight plan remarks are not being displayed correctly - Fixed an issue where NOTAMs that start with an ICAO could highlight that ICAO as adverse weather (Dispatch Manager integration only) - Fixed an issue where the application would incorrectly highlight some visibility statements presented in statute miles

- Special Planning Display & Diversion - Crew Fitness Add New & Mark as 'Not Present' - Support for entering additional data via Trip Log - Flight Details - Adding details to load table & fuel order - Flight Details - Support displaying APU fuel - Flight Details - Support different ICAO/IATA options in fuel table Some of these options require configuration - if you'd like to enable these please contact the CAE team.

Adding a new notification system to notify when a new flight plan has been downloaded. Added the ability to launch Lido mPilot from eFlight Manager. Added enhancements to the terrain report. Added enhancements to the trip log.

Fix for issue where confirmation popup sometimes extends off the screen vertically

- New sign off module including Crew Fitness and Flight Acceptance functionality

- Fixing some rare crashes when using Add ICAO feature - Fixing issue that sometimes caused graphical weather slider bars not to appear properly on the map

eFM 7.0 adds the Trip Log module which offers digital OFPs and a paper-free way to conduct fuel checks, notes, and transmit the data to the eFM server for later evaluation. The modules labels, fields, data sources, and more are highly configurable (per operator) in order to comply with regulatory and airline specific requirements. User data entry can be done via touchscreen, keyboard or smart pen. To configure this feature, please contact your Sabre Team.

6.3.5: - Fixing an issue where the briefing package doesn't load properly on versions of iOS prior to 13 6.3.4: - Fixing an issue with the client stalling during launch when upgrading from 6.3.2 to 6.3.3 6.3.3: - Added brightness slider to help with viewing conditions in the cockpit - Changing to use ETA/ETD in certain cases where STA/STD caused problems with long delays - Adding the ability to display runway dimensions in feet as well as meters

- Added brightness slider to help with viewing conditions in the cockpit - Changing to use ETA/ETD in certain cases where STA/STD caused problems with long delays - Adding the ability to display runway dimensions in feet as well as meters - Fixing an issue with the client stalling during launch when upgrading from 6.3.2 to 6.3.3

- Added brightness slider to help with viewing conditions in the cockpit - Changing to use ETA/ETD in certain cases where STA/STD caused problems with long delays

Adjusted some recommended compiler options to assist with startup issues in iOS 14.2 when deployed with MDM

Fixed an issue where syncing of graphical weather products could get stuck in the "not installed" state.