Update for iOS 17. The app had some of the functionality broken in the recent iOS releases: Camera capture, Attaching image filters, Multimedia replay, many general navigation were also broken. Maps and compositing of map snapshots were non functional due to new Google maps requirements. These are now fixed. General performance improvements.

Update for iOS 17. The app had some of the functionality broken in the recent iOS releases: Camera capture, Multimedia replay, many general navigation were also broken. Maps and compositing of map snapshots were non functional due to new Google maps requirements. These are now fixed. General performance improvements.

AirPrint a composite or a Portfolio from the Library(right swipe on the item and choose the print option) Previously ————— Copy/paste: touch on the composite workspace. If the composite has content, Select, SelectAll, Copy are available. Printing: In the composite workspace, Send shows an option to send to Printer Release note is available in the 'Contact' workspace. - When sending portfolio or composite in panoply format the image compression level can be set with Settings(‘S’) -> PDF settings -> Image compression. The default is maximum compression. - Media on annotations('Note')s. - Since multiple notes can be attached to a component, multiple media attached via corresponding 'Note's can be associated with a component. - You can still attach a media to component itself in addition to the media associated with its notes. - A media attached to a note by default plays in the area of its associated component. However, it(primarily video) can specified to be played in the note itself or in full screen as well, via the Note's detail info. When you add(‘+’) one portfolio to another, now there is additional option: ‘Index To’. ‘Index To’ is the same as previous ‘Navigate To’. ‘Navigate To’ option now has a back navigation arrow in the navigation bar allowing you to navigate back to the previous portfolio. When you switch portfolios by either navigation or indexing, the smooth scroll or left and right transitions are set to those of the destination portfolio as well. The portfolio scroll settings(’S’ -> Portfolio -> Smooth Scroll section) for the current portfolio are saved whenever changes are made. Currently, Portfolio left and right transitions(when smooth scroll is not chosen) are not saved when you make changes to it. However, there is a workaround to save it: just switch on the Smooth scroll and switch it back('off). Portfolio navigation has additional option : NavigateTo to index to another portfolio Selection of color from photo is now incorporated into the color picker. For portfolios, smooth horizontal scrolling for going to previous or next composite is set as the new default. Previously created portfolio will continue to have left and right transition animations as at the time of their creation. New portfolios created will have smooth horizontal scrolling. You can change the behavior to vertical scrolling or animation effects by selecting those via settings: S->Portfolio->Right transition, Left transition, Smooth scrolling(horizontal or vertical). A new Paint mode with air brush texture is available for graphics. In order to activate it, press the ]Paint[ button in the graphics bottom toolbar. To deactivate paint mode, press the same button when it is titled '[Paint] '. Erase for paint mode is available when paint mode is on. In order to activate erase, press the ]Erase[ button. To deactivate erase, press the same button when it is titled '[Erase]'. The settings for paint brush(color, size) is available under Settings -> Graphics. The brush size is interpreted as eraser size when in [Erase] state. Previous methods for drawing lines, arcs, closed figures are still available. These are recommended for situations where composite is converted to PDF as these are rendered as 'Vector graphics' as opposed to painting. Better and more precise blend modes: when blend is specified on a component, blend is applied only to the extent of the component. Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal. Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On. See also: --------- Please go through the version history for information about blending and filters since this is the only place this info is currently available, in particular for 7.7.7111(blending and media attachment to the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud), and 7.6.75(Image filters), 7.5.75(quick dimension modification)

Copy/paste: touch on the composite workspace. If the composite has content, Select, SelectAll, Copy are available. Printing: In the composite workspace, Send shows an option to send to Printer Limits of number of images while compositing is practically removed. Release note is available in the 'Contact' workspace. Bug fixes: Graphics lower toolbar was not avaliable. Previously ————— - When sending portfolio or composite in panoply format the image compression level can be set with Settings(‘S’) -> PDF settings -> Image compression. The default is maximum compression. - Media on annotations('Note')s. - Since multiple notes can be attached to a component, multiple media attached via corresponding 'Note's can be associated with a component. - You can still attach a media to component itself in addition to the media associated with its notes. - A media attached to a note by default plays in the area of its associated component. However, it(primarily video) can specified to be played in the note itself or in full screen as well, via the Note's detail info. When you add(‘+’) one portfolio to another, now there is additional option: ‘Index To’. ‘Index To’ is the same as previous ‘Navigate To’. ‘Navigate To’ option now has a back navigation arrow in the navigation bar allowing you to navigate back to the previous portfolio. When you switch portfolios by either navigation or indexing, the smooth scroll or left and right transitions are set to those of the destination portfolio as well. The portfolio scroll settings(’S’ -> Portfolio -> Smooth Scroll section) for the current portfolio are saved whenever changes are made. Currently, Portfolio left and right transitions(when smooth scroll is not chosen) are not saved when you make changes to it. However, there is a workaround to save it: just switch on the Smooth scroll and switch it back('off). Portfolio navigation has additional option : NavigateTo to index to another portfolio Selection of color from photo is now incorporated into the color picker. For portfolios, smooth horizontal scrolling for going to previous or next composite is set as the new default. Previously created portfolio will continue to have left and right transition animations as at the time of their creation. New portfolios created will have smooth horizontal scrolling. You can change the behavior to vertical scrolling or animation effects by selecting those via settings: S->Portfolio->Right transition, Left transition, Smooth scrolling(horizontal or vertical). A new Paint mode with air brush texture is available for graphics. In order to activate it, press the ]Paint[ button in the graphics bottom toolbar. To deactivate paint mode, press the same button when it is titled '[Paint] '. Erase for paint mode is available when paint mode is on. In order to activate erase, press the ]Erase[ button. To deactivate erase, press the same button when it is titled '[Erase]'. The settings for paint brush(color, size) is available under Settings -> Graphics. The brush size is interpreted as eraser size when in [Erase] state. Previous methods for drawing lines, arcs, closed figures are still available. These are recommended for situations where composite is converted to PDF as these are rendered as 'Vector graphics' as opposed to painting. Better and more precise blend modes: when blend is specified on a component, blend is applied only to the extent of the component. Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal. Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On. See also: --------- Please go through the version history for information about blending and filters since this is the only place this info is currently available, in particular for 7.7.7111(blending and media attachment to the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud), and 7.6.75(Image filters), 7.5.75(quick dimension modification)

In the composite workspace: Ability to push down a component under another by tapping on it(short tap) when measurements are displayed on the component in red upon first touch or pulling it up(with a long tap) Previously ————— - When sending portfolio or composite in panoply format the image compression level can be set with Settings(‘S’) -> PDF settings -> Image compression. The default is maximum compression. - Media on annotations('Note')s. - Since multiple notes can be attached to a component, multiple media attached via corresponding 'Note's can be associated with a component. - You can still attach a media to component itself in addition to the media associated with its notes. - A media attached to a note by default plays in the area of its associated component. However, it(primarily video) can specified to be played in the note itself or in full screen as well, via the Note's detail info. When you add(‘+’) one portfolio to another, now there is additional option: ‘Index To’. ‘Index To’ is the same as previous ‘Navigate To’. ‘Navigate To’ option now has a back navigation arrow in the navigation bar allowing you to navigate back to the previous portfolio. When you switch portfolios by either navigation or indexing, the smooth scroll or left and right transitions are set to those of the destination portfolio as well. The portfolio scroll settings(’S’ -> Portfolio -> Smooth Scroll section) for the current portfolio are saved whenever changes are made. Currently, Portfolio left and right transitions(when smooth scroll is not chosen) are not saved when you make changes to it. However, there is a workaround to save it: just switch on the Smooth scroll and switch it back('off). Portfolio navigation has additional option : NavigateTo to index to another portfolio Selection of color from photo is now incorporated into the color picker. For portfolios, smooth horizontal scrolling for going to previous or next composite is set as the new default. Previously created portfolio will continue to have left and right transition animations as at the time of their creation. New portfolios created will have smooth horizontal scrolling. You can change the behavior to vertical scrolling or animation effects by selecting those via settings: S->Portfolio->Right transition, Left transition, Smooth scrolling(horizontal or vertical). A new Paint mode with air brush texture is available for graphics. In order to activate it, press the ]Paint[ button in the graphics bottom toolbar. To deactivate paint mode, press the same button when it is titled '[Paint] '. Erase for paint mode is available when paint mode is on. In order to activate erase, press the ]Erase[ button. To deactivate erase, press the same button when it is titled '[Erase]'. The settings for paint brush(color, size) is available under Settings -> Graphics. The brush size is interpreted as eraser size when in [Erase] state. Previous methods for drawing lines, arcs, closed figures are still available. These are recommended for situations where composite is converted to PDF as these are rendered as 'Vector graphics' as opposed to painting. Better and more precise blend modes: when blend is specified on a component, blend is applied only to the extent of the component. Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal. Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On. When smooth scrolling is enabled, Portfolio left and right transition effects(In Settings(’S’) -> Portfolio -> Right or Left transition) won’t be applied. See also: --------- Please go through the version history for information about blending and filters since this is the only place this info is currently available, in particular for 7.7.7111(blending and media attachment to the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud), and 7.6.75(Image filters), 7.5.75(quick dimension modification)

Option to send a single composite in Panoply format(with multimedia) from the Library. Previously ————— - When sending portfolio or composite in panoply format the image compression level can be set with Settings(‘S’) -> PDF settings -> Image compression. The default is maximum compression. - Support for sending the single composite in Panoply format from the 'Composite' tab. - Media can now be attached to annotations('Note')s. - Since multiple notes can be attached to a component, multiple media attached via corresponding 'Note's can be associated with a component. - You can still attach a media to component itself in addition to the media associated with its notes. - A media attached to a note by default plays in the area of its associated component. However, it(primarily video) can specified to be played in the note itself or in full screen as well, via the Note's detail info. When you add(‘+’) one portfolio to another, now there is additional option: ‘Index To’. ‘Index To’ is the same as previous ‘Navigate To’. ‘Navigate To’ option now has a back navigation arrow in the navigation bar allowing you to navigate back to the previous portfolio. When you switch portfolios by either navigation or indexing, the smooth scroll or left and right transitions are set to those of the destination portfolio as well. The portfolio scroll settings(’S’ -> Portfolio -> Smooth Scroll section) for the current portfolio are saved whenever changes are made. Currently, Portfolio left and right transitions(when smooth scroll is not chosen) are not saved when you make changes to it. However, there is a workaround to save it: just switch on the Smooth scroll and switch it back('off). Portfolio navigation has additional option : NavigateTo to index to another portfolio Selection of color from photo is now incorporated into the color picker. For portfolios, smooth horizontal scrolling for going to previous or next composite is set as the new default. Previously created portfolio will continue to have left and right transition animations as at the time of their creation. New portfolios created will have smooth horizontal scrolling. You can change the behavior to vertical scrolling or animation effects by selecting those via settings: S->Portfolio->Right transition, Left transition, Smooth scrolling(horizontal or vertical). A new Paint mode with air brush texture is available for graphics. In order to activate it, press the ]Paint[ button in the graphics bottom toolbar. To deactivate paint mode, press the same button when it is titled '[Paint] '. Erase for paint mode is available when paint mode is on. In order to activate erase, press the ]Erase[ button. To deactivate erase, press the same button when it is titled '[Erase]'. The settings for paint brush(color, size) is available under Settings -> Graphics. The brush size is interpreted as eraser size when in [Erase] state. Previous methods for drawing lines, arcs, closed figures are still available. These are recommended for situations where composite is converted to PDF as these are rendered as 'Vector graphics' as opposed to painting. Better and more precise blend modes: when blend is specified on a component, blend is applied only to the extent of the component. Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal. Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On. When smooth scrolling is enabled, Portfolio left and right transition effects(In Settings(’S’) -> Portfolio -> Right or Left transition) won’t be applied. See also: --------- Please go through the version history for information about blending and filters since this is the only place this info is currently available, in particular for 7.7.7111(blending and media attachment to the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud), and 7.6.75(Image filters), 7.5.75(quick dimension modification)

When sending portfolio or composite in panoply format(with multimedia), the compression level for all its images/photos can be set with Settings(‘S’) -> PDF settings -> Image compression. The default is maximum compression. This significantly reduces the size of composites and portfolios to be sent. Previously ----——— - Support for sending the single composite in Panoply format from the 'Composite' tab. - Media can now be attached to annotations('Note')s. - Since multiple notes can be attached to a component, multiple media attached via corresponding 'Note's can be associated with a component. - You can still attach a media to component itself in addition to the media associated with its notes. - A media attached to a note by default plays in the area of its associated component. However, it(primarily video) can specified to be played in the note itself or in full screen as well, via the Note's detail info. When you add(‘+’) one portfolio to another, now there is additional option: ‘Index To’. ‘Index To’ is the same as previous ‘Navigate To’. ‘Navigate To’ option now has a back navigation arrow in the navigation bar allowing you to navigate back to the previous portfolio. When you switch portfolios by either navigation or indexing, the smooth scroll or left and right transitions are set to those of the destination portfolio as well. The portfolio scroll settings(’S’ -> Portfolio -> Smooth Scroll section) for the current portfolio are saved whenever changes are made. Currently, Portfolio left and right transitions(when smooth scroll is not chosen) are not saved when you make changes to it. However, there is a workaround to save it: just switch on the Smooth scroll and switch it back('off). Portfolio navigation has additional option : NavigateTo to index to another portfolio Selection of color from photo is now incorporated into the color picker. For portfolios, smooth horizontal scrolling for going to previous or next composite is set as the new default. Previously created portfolio will continue to have left and right transition animations as at the time of their creation. New portfolios created will have smooth horizontal scrolling. You can change the behavior to vertical scrolling or animation effects by selecting those via settings: S->Portfolio->Right transition, Left transition, Smooth scrolling(horizontal or vertical). A new Paint mode with air brush texture is available for graphics. In order to activate it, press the ]Paint[ button in the graphics bottom toolbar. To deactivate paint mode, press the same button when it is titled '[Paint] '. Erase for paint mode is available when paint mode is on. In order to activate erase, press the ]Erase[ button. To deactivate erase, press the same button when it is titled '[Erase]'. The settings for paint brush(color, size) is available under Settings -> Graphics. The brush size is interpreted as eraser size when in [Erase] state. Previous methods for drawing lines, arcs, closed figures are still available. These are recommended for situations where composite is converted to PDF as these are rendered as 'Vector graphics' as opposed to painting. Better and more precise blend modes: when blend is specified on a component, blend is applied only to the extent of the component. Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal. Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On. When smooth scrolling is enabled, Portfolio left and right transition effects(In Settings(’S’) -> Portfolio -> Right or Left transition) won’t be applied. See also: --------- Please go through the version history for information about blending and filters since this is the only place this info is currently available, in particular for 7.7.7111(blending and media attachment to the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud), and 7.6.75(Image filters), 7.5.75(quick dimension modification)

Support for sending the single composite in Panoply format from the 'Composite' tab. Note that in the Panoply format send, the size is rather large due to inclusion of original image of the composite for images, if the composite has images in it. Bug fixes --------- Portfolios sent in panoply format did not include original images. This is fixed. Previously ---------- - Media can now be attached to annotations('Note')s. - Since multiple notes can be attached to a component, multiple media attached via corresponding 'Note's can be associated with a component. - You can still attach a media to component itself in addition to the media associated with its notes. - A media attached to a note by default plays in the area of its associated component. However, it(primarily video) can specified to be played in the note itself or in full screen as well, via the Note's detail info. When you add(‘+’) one portfolio to another, now there is additional option: ‘Index To’. ‘Index To’ is the same as previous ‘Navigate To’. ‘Navigate To’ option now has a back navigation arrow in the navigation bar allowing you to navigate back to the previous portfolio. When you switch portfolios by either navigation or indexing, the smooth scroll or left and right transitions are set to those of the destination portfolio as well. The portfolio scroll settings(’S’ -> Portfolio -> Smooth Scroll section) for the current portfolio are saved whenever changes are made. Currently, Portfolio left and right transitions(when smooth scroll is not chosen) are not saved when you make changes to it. However, there is a workaround to save it: just switch on the Smooth scroll and switch it back('off). Portfolio navigation has additional option : NavigateTo to index to another portfolio Selection of color from photo is now incorporated into the color picker. For portfolios, smooth horizontal scrolling for going to previous or next composite is set as the new default. Previously created portfolio will continue to have left and right transition animations as at the time of their creation. New portfolios created will have smooth horizontal scrolling. You can change the behavior to vertical scrolling or animation effects by selecting those via settings: S->Portfolio->Right transition, Left transition, Smooth scrolling(horizontal or vertical). A new Paint mode with air brush texture is available for graphics. In order to activate it, press the ]Paint[ button in the graphics bottom toolbar. To deactivate paint mode, press the same button when it is titled '[Paint] '. Erase for paint mode is available when paint mode is on. In order to activate erase, press the ]Erase[ button. To deactivate erase, press the same button when it is titled '[Erase]'. The settings for paint brush(color, size) is available under Settings -> Graphics. The brush size is interpreted as eraser size when in [Erase] state. Previous methods for drawing lines, arcs, closed figures are still available. These are recommended for situations where composite is converted to PDF as these are rendered as 'Vector graphics' as opposed to painting. Better and more precise blend modes: when blend is specified on a component, blend is applied only to the extent of the component. Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal. Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On. When smooth scrolling is enabled, Portfolio left and right transition effects(In Settings(’S’) -> Portfolio -> Right or Left transition) won’t be applied. See also: --------- Please go through the version history for information about blending and filters since this is the only place this info is currently available, in particular for 7.7.7111(blending and media attachment to the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud), and 7.6.75(Image filters), 7.5.75(quick dimension modification)

Bug fixes --------- - Geolocation display on map in the composites roll for composites created from now on. - Composite roll now scrolls to latest composite/portfolio when a new one is added. Previously ---------- - Media can now be attached to annotations('Note')s. - Since multiple notes can be attached to a component, multiple media attached via corresponding 'Note's can be associated with a component. - You can still attach a media to component itself in addition to the media associated with its notes. - A media attached to a note by default plays in the area of its associated component. However, it(primarily video) can specified to be played in the note itself or in full screen as well, via the Note's detail info. When you add(‘+’) one portfolio to another, now there is additional option: ‘Index To’. ‘Index To’ is the same as previous ‘Navigate To’. ‘Navigate To’ option now has a back navigation arrow in the navigation bar allowing you to navigate back to the previous portfolio. When you switch portfolios by either navigation or indexing, the smooth scroll or left and right transitions are set to those of the destination portfolio as well. The portfolio scroll settings(’S’ -> Portfolio -> Smooth Scroll section) for the current portfolio are saved whenever changes are made. Currently, Portfolio left and right transitions(when smooth scroll is not chosen) are not saved when you make changes to it. However, there is a workaround to save it: just switch on the Smooth scroll and switch it back('off). Portfolio navigation has additional option : NavigateTo to index to another portfolio Selection of color from photo is now incorporated into the color picker. For portfolios, smooth horizontal scrolling for going to previous or next composite is set as the new default. Previously created portfolio will continue to have left and right transition animations as at the time of their creation. New portfolios created will have smooth horizontal scrolling. You can change the behavior to vertical scrolling or animation effects by selecting those via settings: S->Portfolio->Right transition, Left transition, Smooth scrolling(horizontal or vertical). A new Paint mode with air brush texture is available for graphics. In order to activate it, press the ]Paint[ button in the graphics bottom toolbar. To deactivate paint mode, press the same button when it is titled '[Paint] '. Erase for paint mode is available when paint mode is on. In order to activate erase, press the ]Erase[ button. To deactivate erase, press the same button when it is titled '[Erase]'. The settings for paint brush(color, size) is available under Settings -> Graphics. The brush size is interpreted as eraser size when in [Erase] state. Previous methods for drawing lines, arcs, closed figures are still available. These are recommended for situations where composite is converted to PDF as these are rendered as 'Vector graphics' as opposed to painting. Better and more precise blend modes: when blend is specified on a component, blend is applied only to the extent of the component. When PDF is chosen as the format to send, blend info is preserved in the PDF. Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal. Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On. When smooth scrolling is enabled, Portfolio left and right transition effects(In Settings(’S’) -> Portfolio -> Right or Left transition) won’t be applied(since they can not mean anything) See also: --------- Please go through the version history for information about blending and filters since this is the only place this info is currently available, in particular for 7.7.7111(blending and media attachment to the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud), and 7.6.75(Image filters), 7.5.75(quick dimension modification)

Bug fixes --------- There were many issues with media on ‘Note’s. Especially with a note that had media attached but the component the note is attached to itself didn’t. Re-edit and re-save if you have issues(just bring it to composite workspace, press edit, press save). Previously ---------- - Media can now be attached to annotations('Note')s. - Since multiple notes can be attached to a component, multiple media attached via corresponding 'Note's can be associated with a component. - You can still attach a media to component itself in addition to the media associated with its notes. - A media attached to a note by default plays in the area of its associated component. However, it(primarily video) can specified to be played in the note itself or in full screen as well, via the Note's detail info. When you add(‘+’) one portfolio to another, now there is additional option: ‘Index To’. ‘Index To’ is the same as previous ‘Navigate To’. ‘Navigate To’ option now has a back navigation arrow in the navigation bar allowing you to navigate back to the previous portfolio. When you switch portfolios by either navigation or indexing, the smooth scroll or left and right transitions are set to those of the destination portfolio as well. The portfolio scroll settings(’S’ -> Portfolio -> Smooth Scroll section) for the current portfolio are saved whenever changes are made. Currently, Portfolio left and right transitions(when smooth scroll is not chosen) are not saved when you make changes to it. However, there is a workaround to save it: just switch on the Smooth scroll and switch it back('off). Portfolio navigation has additional option : NavigateTo to index to another portfolio Selection of color from photo is now incorporated into the color picker. For portfolios, smooth horizontal scrolling for going to previous or next composite is set as the new default. Previously created portfolio will continue to have left and right transition animations as at the time of their creation. New portfolios created will have smooth horizontal scrolling. You can change the behavior to vertical scrolling or animation effects by selecting those via settings: S->Portfolio->Right transition, Left transition, Smooth scrolling(horizontal or vertical). A new Paint mode with air brush texture is available for graphics. In order to activate it, press the ]Paint[ button in the graphics bottom toolbar. To deactivate paint mode, press the same button when it is titled '[Paint] '. Erase for paint mode is available when paint mode is on. In order to activate erase, press the ]Erase[ button. To deactivate erase, press the same button when it is titled '[Erase]'. The settings for paint brush(color, size) is available under Settings -> Graphics. The brush size is interpreted as eraser size when in [Erase] state. Previous methods for drawing lines, arcs, closed figures are still available. These are recommended for situations where composite is converted to PDF as these are rendered as 'Vector graphics' as opposed to painting. Better and more precise blend modes: when blend is specified on a component, blend is applied only to the extent of the component. When PDF is chosen as the format to send, blend info is preserved in the PDF. Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal. Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On. When smooth scrolling is enabled, Portfolio left and right transition effects(In Settings(’S’) -> Portfolio -> Right or Left transition) won’t be applied(since they can not mean anything) See also: --------- Please go through the version history for information about blending and filters since this is the only place this info is currently available, in particular for 7.7.7111(blending and media attachment to the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud), and 7.6.75(Image filters), 7.5.75(quick dimension modification)

- Media can now be attached to annotations('Note')s. - Since multiple notes can be attached to a component(just touch Note button to turn it on and touch the place where you want to put the note, type. You may want to switch Note off at the end. If you put the Note on top of a component, it gets associated with it and will move with the component), multiple media attached via corresponding 'Note's can be associated with a component. - You can still attach a media to component itself in addition to the media associated with its notes. - A media attached to a note by default plays in the area of its associated component. However, it(primarily video) can specified to be played in the note itself or in full screen as well, via the Note's detail info. From previous versions ------------------------ When you add(‘+’) one portfolio to another, now there is additional option: ‘Index To’. ‘Index To’ is the same as previous ‘Navigate To’. ‘Navigate To’ option now has a back navigation arrow in the navigation bar allowing you to navigate back to the previous portfolio. When you switch portfolios by either navigation or indexing, the smooth scroll or left and right transitions are set to those of the destination portfolio as well. The portfolio scroll settings(’S’ -> Portfolio -> Smooth Scroll section) for the current portfolio are saved whenever changes are made. Currently, Portfolio left and right transitions(when smooth scroll is not chosen) are not saved when you make changes to it. However, there is a workaround to save it: just switch on the Smooth scroll and switch it back('off). Portfolio navigation has additional option : NavigateTo to index to another portfolio Selection of color from photo is now incorporated into the color picker. For portfolios, smooth horizontal scrolling for going to previous or next composite is set as the new default. Previously created portfolio will continue to have left and right transition animations as at the time of their creation. New portfolios created will have smooth horizontal scrolling. You can change the behavior to vertical scrolling or animation effects by selecting those via settings: S->Portfolio->Right transition, Left transition, Smooth scrolling(horizontal or vertical). A new Paint mode with air brush texture is available for graphics. In order to activate it, press the ]Paint[ button in the graphics bottom toolbar. To deactivate paint mode, press the same button when it is titled '[Paint] '. Erase for paint mode is available when paint mode is on. In order to activate erase, press the ]Erase[ button. To deactivate erase, press the same button when it is titled '[Erase]'. The settings for paint brush(color, size) is available under Settings -> Graphics. The brush size is interpreted as eraser size when in [Erase] state. Previous methods for drawing lines, arcs, closed figures are still available. These are recommended for situations where composite is converted to PDF as these are rendered as 'Vector graphics' as opposed to painting. Better and more precise blend modes: when blend is specified on a component, blend is applied only to the extent of the component. When PDF is chosen as the format to send, blend info is preserved in the PDF. Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal. Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On. When smooth scrolling is enabled, Portfolio left and right transition effects(In Settings(’S’) -> Portfolio -> Right or Left transition) won’t be applied(since they can not mean anything) See also: --------- Please go through the version history for information about blending and filters since this is the only place this info is currently available, in particular for 7.7.7111(blending and media attachment to the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud), and 7.6.75(Image filters), 7.5.75(quick component dimension modification)

Bug fixes: ---------- - Previously Filter attached to the composite as a whole was not rendered correctly when saved. - Note was previously not rendered correctly if it was attached to one of the components instead of composite as a whole. If you have either of the issues in your current composite, re-edit and re-save to fix the issues. From previous versions ------------------------ When you add(‘+’) one portfolio to another, now there is additional option: ‘Index To’. ‘Index To’ is the same as previous ‘Navigate To’. ‘Navigate To’ option now has a back navigation arrow in the navigation bar allowing you to navigate back to the previous portfolio. When you switch portfolios by either navigation or indexing, the smooth scroll or left and right transitions are set to those of the destination portfolio as well. The portfolio scroll settings(’S’ -> Portfolio -> Smooth Scroll section) for the current portfolio are saved whenever changes are made. Currently, Portfolio left and right transitions(when smooth scroll is not chosen) are not saved when you make changes to it. However, there is a workaround to save it: just switch on the Smooth scroll and switch it back('off). Portfolio navigation has additional option : NavigateTo to index to another portfolio Selection of color from photo is now incorporated into the color picker. For portfolios, smooth horizontal scrolling for going to previous or next composite is set as the new default. Previously created portfolio will continue to have left and right transition animations as at the time of their creation. New portfolios created will have smooth horizontal scrolling. You can change the behavior to vertical scrolling or animation effects by selecting those via settings: S->Portfolio->Right transition, Left transition, Smooth scrolling(horizontal or vertical). A new Paint mode with air brush texture is available for graphics. In order to activate it, press the ]Paint[ button in the graphics bottom toolbar. To deactivate paint mode, press the same button when it is titled '[Paint] '. Erase for paint mode is available when paint mode is on. In order to activate erase, press the ]Erase[ button. To deactivate erase, press the same button when it is titled '[Erase]'. The settings for paint brush(color, size) is available under Settings -> Graphics. The brush size is interpreted as eraser size when in [Erase] state. Previous methods for drawing lines, arcs, closed figures are still available. These are recommended for situations where composite is converted to PDF as these are rendered as 'Vector graphics' as opposed to painting. Better and more precise blend modes: when blend is specified on a component, blend is applied only to the extent of the component. When PDF is chosen as the format to send, blend info is preserved in the PDF. Portfolio smooth scrolling Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal. Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On. When smooth scrolling is enabled, Portfolio left and right transition effects(In Settings(’S’) -> Portfolio -> Right or Left transition) won’t be applied(since they can not mean anything) See also: --------- Please go through the version history for information about blending and filters since this is the only place this info is currently available, in particular for 7.7.7111(blending and media attachment to the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud), and 7.6.75(Image filters), 7.5.75(quick component dimension modification)

Bug fixes: ---------- - ´Note’ previously was not rendered correctly in the saved composite. If you previously created a composite with the issue, re-edit and re-save to fix the issue. - Portolio ‘go to’ particular sheet(by tapping on the current sheet number in portfolio bottom tool bar and entering the sheet to go to) didn’t previously scroll thumbnail roll to center the chosen sheet. From previous versions ------------------------ When you add(‘+’) one portfolio to another, now there is additional option: ‘Index To’. ‘Index To’ is the same as previous ‘Navigate To’. ‘Navigate To’ option now has a back navigation arrow in the navigation bar allowing you to navigate back to the previous portfolio. When you switch portfolios by either navigation or indexing, the smooth scroll or left and right transitions are set to those of the destination portfolio as well. The portfolio scroll settings(’S’ -> Portfolio -> Smooth Scroll section) for the current portfolio are saved whenever changes are made. Currently, Portfolio left and right transitions(when smooth scroll is not chosen) are not saved when you make changes to it. However, there is a workaround to save it: just switch on the Smooth scroll and switch it back('off). Portfolio navigation has additional option : NavigateTo to index to another portfolio Selection of color from photo is now incorporated into the color picker. For portfolios, smooth horizontal scrolling for going to previous or next composite is set as the new default. Previously created portfolio will continue to have left and right transition animations as at the time of their creation. New portfolios created will have smooth horizontal scrolling. You can change the behavior to vertical scrolling or animation effects by selecting those via settings: S->Portfolio->Right transition, Left transition, Smooth scrolling(horizontal or vertical). A new Paint mode with air brush texture is available for graphics. In order to activate it, press the ]Paint[ button in the graphics bottom toolbar. To deactivate paint mode, press the same button when it is titled '[Paint] '. Erase for paint mode is available when paint mode is on. In order to activate erase, press the ]Erase[ button. To deactivate erase, press the same button when it is titled '[Erase]'. The settings for paint brush(color, size) is available under Settings -> Graphics. The brush size is interpreted as eraser size when in [Erase] state. Previous methods for drawing lines, arcs, closed figures are still available. These are recommended for situations where composite is converted to PDF as these are rendered as 'Vector graphics' as opposed to painting. Better and more precise blend modes: when blend is specified on a component, blend is applied only to the extent of the component. When PDF is chosen as the format to send, blend info is preserved in the PDF. Portfolio smooth scrolling Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal. Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On. When smooth scrolling is enabled, Portfolio left and right transition effects(In Settings(’S’) -> Portfolio -> Right or Left transition) won’t be applied(since they can not mean anything) See also: --------- Please go through the version history for information about blending and filters since this is the only place this info is currently available, in particular for 7.7.7111(blending and media attachment to the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud), and 7.6.75(Image filters), 7.5.75(quick component dimension modification)

When you add(‘+’) one portfolio to another, now there is additional option: ‘Index To’. ‘Index To’ is the same as previous ‘Navigate To’. ‘Navigate To’ option now has a back navigation arrow in the navigation bar allowing you to navigate back to the previous portfolio. When you switch portfolios by either navigation or indexing, the smooth scroll or left and right transitions are set to those of the destination portfolio as well. The portfolio scroll settings(’S’ -> Portfolio -> Smooth Scroll section) for the current portfolio are saved whenever changes are made. Currently, Portfolio left and right transitions(when smooth scroll is not choosen) are not saved when you make changes to it. However, there is a workaround to save it: just switch on the Smooth scroll and switch it back('off). Bug fixes: ————- When portfolio smooth scrolling is enabled, selecting a composite in thumbnail now scrolls the content to the correct composite sheet. Setting the current page number in the bottom toolbar in portfolio in portfolio scroll mode also works. From previous versions ------------------------ Portfolio navigation has additional option : NavigateTo to index to another portfolio Selection of color from photo is now incorporated into the color picker. For portfolios, smooth horizontal scrolling for going to previous or next composite is set as the new default. Previously created portfolio will continue to have left and right transition animations as at the time of their creation. New portfolios created will have smooth horizontal scrolling. You can change the behavior to vertical scrolling or animation effects by selecting those via settings: S->Portfolio->Right transition, Left transition, Smooth scrolling(horizontal or vertical). A new Paint mode with air brush texture is available for graphics. In order to activate it, press the ]Paint[ button in the graphics bottom toolbar. To deactivate paint mode, press the same button when it is titled '[Paint] '. Erase for paint mode is available when paint mode is on. In order to activate erase, press the ]Erase[ button. To deactivate erase, press the same button when it is titled '[Erase]'. The settings for paint brush(color, size) is available under Settings -> Graphics. The brush size is interpreted as eraser size when in [Erase] state. Previous methods for drawing lines, arcs, closed figures are still available. These are recommended for situations where composite is converted to PDF as these are rendered as 'Vector graphics' as opposed to painting. Better and more precise blend modes: when blend is specified on a component, blend is applied only to the extent of the component. When PDF is chosen as the format to send, blend info is preserved in the PDF. Portfolio smooth scrolling Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal. Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On. When smooth scrolling is enabled, Portfolio left and right transition effects(In Settings(’S’) -> Portfolio -> Right or Left transition) won’t be applied(since they can not mean anything) See also: --------- Please go through the version history for information about blending and filters since this is the only place this info is currently available, in particular for 7.7.7111(blending and media attachment to the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud), and 7.6.75(Image filters), 7.5.75(quick component dimension modification)

Navigation from one portfolio to another now has two options: - Index To: this is the same as previous ‘Navigate To’, the current portfolio is replaced by new one when the user touches the content either in the main area or in thumbnails. - Navigate To: This option will provide a back button in the navigation bar allowing navigation back to the previous portfolio. These options are presented when a portfolio is chosen to be added to another portfolio in the composites library. Known issue: ------------- 1. Portfolio default swipe has reverted(unintentionally) back to transitions. In order to enable smooth scrolling, Turn off(it is on by default but has no effect) : S->Portfolio->Smooth scroll *and then* turn it back on. 2. On iPhone, the toolbar buttons in iOS 10.x the Portfolio workspace re-arrange. Some become invisible. For now, the workaround is to use landscape mode, where all buttons are always shown. From previous versions ------------------------ Navigation from one portfolio to another: when inserting one portfolio to another, there is an additional 'Navigate To' option. Touching the composite for the inserted portfolio navigates to that portfolio. Currently, there is no automatic 'back' to go back to the previous portfolio. Therefore the mechanism is more like an index. However, you can use the same mechanism to navigate from a particular composite in the destination portfolio to the original portfolio. For portfolios, smooth horizontal scrolling for going to previous or next composite is set as the new default. Previously created portfolio will continue to have left and right transition animations as at the time of theirFor portfolios, smooth horizontal scrolling for going to previous or next composite is set as the new default. Previously created portfolio will continue to have left and right transition animations as at the time of their creation. New portfolios created will have smooth horizontal scrolling. You can change the behavior to vertical scrolling or animation effects by selecting those via settings: S->Portfolio->Right transition, Left transition, Smooth scrolling(horizontal or vertical). A new Paint mode with air brush texture is available for graphics. In order to activate it, press the ]Paint[ button in the graphics bottom toolbar. To deactivate paint mode, press the same button when it is titled '[Paint] '. Erase for paint mode is available when paint mode is on. In order to activate erase, press the ]Erase[ button. To deactivate erase, press the same button when it is titled '[Erase]'. The settings for paint brush(color, size) is available under Settings -> Graphics. The brush size is interpreted as eraser size when in [Erase] state. Previous methods for drawing lines, arcs, closed figures are still available. These are recommended for situations where composite is converted to PDF as these are rendered as 'Vector graphics' as opposed to painting. See also: --------- Please go through the version history for information about blending and filters since this is the only place this info is currently available, in particular for 7.7.7111(blending and media attachment to the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud), and 7.6.75(Image filters), 7.5.75(quick component dimension modification) creation. New portfolios created will have smooth horizontal scrolling. You can change the behavior to vertical scrolling or animation effects by selecting those via settings: S->Portfolio->Right transition, Left transition, Smooth scrolling(horizontal or vertical).

Navigation from one portfolio to another: when inserting one portfolio to another, there is an additional 'Navigate To' option. Touching the composite for the inserted portfolio navigates to that portfolio. Currently, there is no automatic 'back' to go back to the previous portfolio. Therefore the mechanism is more like an index. However, you can use the same mechanism to navigate from a particular composite in the destination portfolio to the original portfolio. Bug fixes --------- Crash while compositing graphics. From previous versions ------------------------ For portfolios, smooth horizontal scrolling for going to previous or next composite is set as the new default. Previously created portfolio will continue to have left and right transition animations as at the time of theirFor portfolios, smooth horizontal scrolling for going to previous or next composite is set as the new default. Previously created portfolio will continue to have left and right transition animations as at the time of their creation. New portfolios created will have smooth horizontal scrolling. You can change the behavior to vertical scrolling or animation effects by selecting those via settings: S->Portfolio->Right transition, Left transition, Smooth scrolling(horizontal or vertical). A new Paint mode with air brush texture is available for graphics. In order to activate it, press the ]Paint[ button in the graphics bottom toolbar. To deactivate paint mode, press the same button when it is titled '[Paint] '. Erase for paint mode is available when paint mode is on. In order to activate erase, press the ]Erase[ button. To deactivate erase, press the same button when it is titled '[Erase]'. The settings for paint brush(color, size) is available under Settings -> Graphics. The brush size is interpreted as eraser size when in [Erase] state. Previous methods for drawing lines, arcs, closed figures are still available. These are recommended for situations where composite is converted to PDF as these are rendered as 'Vector graphics' as opposed to painting. See also: --------- Please go through the version history for information about blending and filters since this is the only place this info is currently available, in particular for 7.7.7111(blending and media attachment to the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud), and 7.6.75(Image filters), 7.5.75(quick component dimension modification) creation. New portfolios created will have smooth horizontal scrolling. You can change the behavior to vertical scrolling or animation effects by selecting those via settings: S->Portfolio->Right transition, Left transition, Smooth scrolling(horizontal or vertical).

- Selection of color from photo is now incorporated into the color picker. - For portfolios, smooth horizontal scrolling for going to previous or next composite is set as the new default. Previously created portfolio will continue to have left and right transition animations as at the time of their creation. New portfolios created will have smooth horizontal scrolling. You can change the behavior to vertical scrolling or animation effects by selecting those via settings: S->Portfolio->Right transition, Left transition, Smooth scrolling(horizontal or vertical). Bug fixes --------- Non-paint graphics that are created(lines, circles, filled, unfilled) were not rendered until composited. This is now fixed. From previous versions ------------------------ A new Paint mode with air brush texture is available for graphics. In order to activate it, press the ]Paint[ button in the graphics bottom toolbar. To deactivate paint mode, press the same button when it is titled '[Paint] '. Erase for paint mode is available when paint mode is on. In order to activate erase, press the ]Erase[ button. To deactivate erase, press the same button when it is titled '[Erase]'. The settings for paint brush(color, size) is available under Settings -> Graphics. The brush size is interpreted as eraser size when in [Erase] state. Previous methods for drawing lines, arcs, closed figures are still available. These are recommended for situations where composite is converted to PDF as these are rendered as 'Vector graphics' as opposed to painting. Better and more precise blend modes: when blend is specified on a component, blend is applied only to the extent of the component. When PDF is chosen as the format to send, blend info is preserved in the PDF. Portfolio smooth scrolling Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal. Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On. When smooth scrolling is enabled, Portfolio left and right transition effects(In Settings(’S’) -> Portfolio -> Right or Left transition) won’t be applied(since they can not mean anything) See also: --------- Please go through the version history for information about blending and filters since this is the only place this info is currently available, in particular for 7.7.7111(blending and media attachment to the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud), and 7.6.75(Image filters), 7.5.75(quick component dimension modification)

The following Graphics paint mode bugs are fixed: - Eraser left marks of erasure. - Brush strokes of different colors lost original color once incorporated into the composite workspace. If you had previously created composite with the above issues, you can bring them to composite workspace, press edit, the graphics paint should fix itself, then save. Known issue: Non-paint mode graphics does not render when drawn. However, it does render when composited into composite workspace. From previous versions ------------------------ A new Paint mode with air brush texture is available for graphics. In order to activate it, press the ]Paint[ button in the graphics bottom toolbar. To deactivate paint mode, press the same button when it is titled '[Paint] '. Erase for paint mode is available when paint mode is on. In order to activate erase, press the ]Erase[ button. To deactivate erase, press the same button when it is titled '[Erase]'. The settings for paint brush(color, size) is available under Settings -> Graphics. The brush size is interpreted as eraser size when in [Erase] state. Previous methods for drawing lines, arcs, closed figures are still available. These are recommended for situations where composite is converted to PDF as these are rendered as 'Vector graphics' as opposed to painting. Better and more precise blend modes: when blend is specified on a component, blend is applied only to the extent of the component. When PDF is chosen as the format to send, blend info is preserved in the PDF. Portfolio smooth scrolling Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal. Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On. When smooth scrolling is enabled, Portfolio left and right transition effects(In Settings(’S’) -> Portfolio -> Right or Left transition) won’t be applied(since they can not mean anything) See also: --------- Please go through the version history for information about blending and filters since this is the only place this info is currently available, in particular for 7.7.7111(blending and media attachment to the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud), and 7.6.75(Image filters), 7.5.75(quick component dimension modification)

Improved paint mode. Brush size for paint mode can be larger and interpreted in a screen size and resolution independent way so that same brush size looks same width on different iOS devices during creation. From previous releases ----------------------- A new rudimentary paint mode with air brush texture is available for graphics. In order to activate it, press the ']Paint[' button in the graphics bottom toolbar. To deactivate this paint mode, press the same button when it is titled '[Paint] '. Erase for paint mode is available when paint mode is on. In order to activate erase, press the ']Erase[' button. To deactivate erase, press the same button when it is titled '[Erase]'. The setting for paint brush(color, size) is available under Settings('S') -> Graphics. The brush size is interpreted as the eraser size when in the '[Erase]' state. Previous methods for drawing lines, arcs, closed figures are still available. These are recommended for situations where the composite is converted to PDF as these are rendered as 'Vector graphics' as opposed to painting, which is kept in 'vector' format within the app but may not be when exported to other formats, and hence may not scale well when zoomed, or lose resolution on larger screens, or on screens with higher resolution than where the composite was created. Better and more precise blend modes: when blend is specified on a component, blend is applied only to the extent of the component. When PDF is chosen as the format to send, blend info is preserved in the PDF. Portfolio smooth scrolling Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal. Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On. When smooth scrolling is enabled, Portfolio left and right transition effects(In Settings(’S’) -> Portfolio -> Right or Left transition) won’t be applied(since they can not mean anything) See also: --------- Please go through the version history for information about blending and filters since this is the only place this info is currently available, in particular for 7.7.7111(blending and media attachment to the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud), and 7.6.75(Image filters), 7.5.75(quick component dimension modification)

A new rudimentary paint mode with air brush texture is available for graphics. In order to activate it, press the ']Paint[' button in the graphics bottom toolbar. To deactivate this paint mode, press the same button when it is titled '[Paint] '. Erase for paint mode is available when paint mode is on. In order to activate erase, press the ']Erase[' button. To deactivate erase, press the same button when it is titled '[Erase]'. The setting for paint brush(color, size) is available under Settings('S') -> Graphics. The brush size is interpreted as the eraser size when in the '[Erase]' state. Previous methods for drawing lines, arcs, closed figures are still available. These are recommended for situations where the composite is converted to PDF as these are rendered as 'Vector graphics' as opposed to painting, which is kept in 'vector' format within the app but may not be when exported to other formats, and hence may not scale well when zoomed, or lose resolution on larger screens, or on screens with higher resolution than where the composite was created. Bug fixes --------- - Send image from composite workspace. - Graphics bottom toolbar was sometimes unavailable. From previous versions ------------------------ Better and more precise blend modes: when blend is specified on a component, blend is applied only to the extent of the component. When PDF is chosen as the format to send, blend info is preserved in the PDF. Portfolio smooth scrolling Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal. Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On. When smooth scrolling is enabled, Portfolio left and right transition effects(In Settings(’S’) -> Portfolio -> Right or Left transition) won’t be applied(since they can not mean anything) See also: --------- Please go through the version history for information about blending and filters since this is the only place this info is currently available, in particular for 7.7.7111(blending and media attachment to the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud), and 7.6.75(Image filters), 7.5.75(quick component dimension modification)

Better and more precise blend modes: when blend is specified on a component, blend is applied only to the extent of the component. When PDF is chosen as the format to send, blend info is preserved in the PDF. Bug fixes: ---------- Crash when setting filter on composite as a whole is fixed. Native resolution of a composite is preserved as much as possible in different contexts. From previous versions: ----------------------- PDF generation and send is now re-enabled. In order to regenerate true PDF for any composites that currently have PDF as just a wrapper for the composite as an image, edit and save the composite. For portfolios with composites that are just image wrappers, choose to edit the particular composite in Portfolio, choose edit in composite workspace, press done and choose to replace current. New additional Color Chooser(‘Swatch, Hex, Slider’) lets you choose color by color ‘swatch/color blocks’, by name, hex or decimal color code, or using red, green, and blue color sliders. When you touch ‘Color’ button for any item in the Settings(’S’), the two options are presented: previous (Red,Green) and Blue color chooser, or the new color chooser. The new color chooser also lets you ‘sort’ colors presented by name, hex value, or ‘original’ random order. Setting a value for the color updates other selectors in the new color chooser to the corresponding same color value — including scrolling the color swatches to so as to the this color be in the first row. The new color choosers are supported in the individual component inspector(‘i’) 
On iPad, dismiss the color chooser by pressing ‘Done’. Dismissing by just tapping outside the setting popup will not set the color. Portfolio smooth scrolling Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal. Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On. When smooth scrolling is enabled, Portfolio left and right transition effects(In Settings(’S’) -> Portfolio -> Right or Left transition) won’t be applied(since they can not mean anything) See also: --------- Please go through the version history for information about blending and filters since this is the only place this info is currently available, in particular for 7.7.7111(blending and media attachment to the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud), and 7.6.75(Image filters), 7.5.75(quick component dimension modification)

Bug fixes: ---------- The orientation of a composite or portfolio in the library is fixed. You can change the orientation if need be. The changed orientation is properly remembered. From previous versions: ----------------------- PDF generation and send is now re-enabled. In order to regenerate true PDF for any composites that currently have PDF as just a wrapper for the composite as an image, edit and save the composite. For portfolios with composites that are just image wrappers, choose to edit the particular composite in Portfolio, choose edit in composite workspace, press done and choose to replace current. New additional Color Chooser(‘Swatch, Hex, Slider’) lets you choose color by color ‘swatch/color blocks’, by name, hex or decimal color code, or using red, green, and blue color sliders. When you touch ‘Color’ button for any item in the Settings(’S’), the two options are presented: previous (Red,Green) and Blue color chooser, or the new color chooser. The new color chooser also lets you ‘sort’ colors presented by name, hex value, or ‘original’ random order. Setting a value for the color updates other selectors in the new color chooser to the corresponding same color value — including scrolling the color swatches to so as to the this color be in the first row. The new color choosers are supported in the individual component inspector(‘i’) 
On iPad, dismiss the color chooser by pressing ‘Done’. Dismissing by just tapping outside the setting popup will not set the color. Portfolio smooth scrolling Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal. Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On. When smooth scrolling is enabled, Portfolio left and right transition effects(In Settings(’S’) -> Portfolio -> Right or Left transition) won’t be applied(since they can not mean anything) See also: --------- Please go through the version history for information about blending and filters since this is the only place this info is currently available, in particular for 7.7.7111(blending and media attachment to the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud), and 7.6.75(Image filters), 7.5.75(quick component dimension modification)

Bug fixes: ---------- Portfolio : replace current composite crash fixed. Also when composite is added to a Portfolio by 'Done' in composite workspace, it is made the current sheet. PDF generation and send is now re-enabled. In order to regenerate true PDF for any composites that currently have PDF as just a wrapper for the composite as an image, edit and save the composite. For portfolios with composites that are just image wrappers, choose to edit the particular composite in Portfolio, choose edit in composite workspace, press done and choose to insert the updated composite left or right. Delete the previous composite. Known issue: ------------- The orientation of a composite or portfolio in the library may not be proper. The orientation can be changed: touch on the composite/portfolio. The composite is displayed on top of a map. The lower right corner has a rotate button. Each touch on it will rotate the view of the composite in the library by 90 degrees, once the map view is dismissed by touching on the map again. From previous versions: ----------------------- (1) New additional Color Chooser(‘Swatch, Hex, Slider’) lets you choose color by color ‘swatch/color blocks’, by name, hex or decimal color code, or using red, green, and blue color sliders. When you touch ‘Color’ button for any item in the Settings(’S’), the two options are presented: previous (Red,Green) and Blue color chooser, or the new color chooser. The new color chooser also lets you ‘sort’ colors presented by name, hex value, or ‘original’ random order. Setting a value for the color updates other selectors in the new color chooser to the corresponding same color value — including scrolling the color swatches to so as to the this color be in the first row. The new color choosers are supported in the individual component inspector(‘i’) 
On iPad, dismiss the color chooser by pressing ‘Done’. Dismissing by just tapping outside the setting popup will not set the color. (2) Portfolio smooth scrolling Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal. Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On. When smooth scrolling is enabled, Portfolio left and right transition effects(In Settings(’S’) -> Portfolio -> Right or Left transition) won’t be applied(since they can not mean anything) See also: --------- Please go through the version history for information about blending and filters since this is the only place this info is currently available, in particular for 7.7.7111(blending and media attachment to the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud), and 7.6.75(Image filters), 7.5.75(quick component dimension modification)

Bug fixes: ---------- Portfolio : replace current composite crash fixed. Also when composite is added to a Portfolio by 'Done' in composite workspace, it is made the current sheet. PDF generation and send is now re-enabled. In order to regenerate true PDF for any composites that currently have PDF as just a wrapper for the composite as an image, edit and save the composite. For portfolios with composites that are just image wrappers, choose to edit the particular composite in Portfolio, choose edit in composite workspace, press done and choose to insert the updated composite left or right. Delete the previous composite. From previous versions: ----------------------- (1) New additional Color Chooser(‘Swatch, Hex, Slider’) lets you choose color by color ‘swatch/color blocks’, by name, hex or decimal color code, or using red, green, and blue color sliders. When you touch ‘Color’ button for any item in the Settings(’S’), the two options are presented: previous (Red,Green) and Blue color chooser, or the new color chooser. The new color chooser also lets you ‘sort’ colors presented by name, hex value, or ‘original’ random order. Setting a value for the color updates other selectors in the new color chooser to the corresponding same color value — including scrolling the color swatches to so as to the this color be in the first row. The new color choosers are supported in the individual component inspector(‘i’) 
On iPad, dismiss the color chooser by pressing ‘Done’. Dismissing by just tapping outside the setting popup will not set the color. (2) Portfolio smooth scrolling Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal. Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On. When smooth scrolling is enabled, Portfolio left and right transition effects(In Settings(’S’) -> Portfolio -> Right or Left transition) won’t be applied(since they can not mean anything) See also: --------- Please go through the version history for information about blending and filters since this is the only place this info is currently available, in particular for 7.7.7111(blending and media attachment to the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud), and 7.6.75(Image filters), 7.5.75(quick component dimension modification)

Bug fixes --------- Compositing and manipulation of images on iPad Pro. From previous versions: ----------------------- (1) New additional Color Chooser(‘Swatch, Hex, Slider’) lets you choose color by color ‘swatch/color blocks’, by name, hex or decimal color code, or using red, green, and blue color sliders. When you touch ‘Color’ button for any item in the Settings(’S’), the two options are presented: previous (Red,Green) and Blue color chooser, or the new color chooser. The new color chooser also lets you ‘sort’ colors presented by name, hex value, or ‘original’ random order. Setting a value for the color updates other selectors in the new color chooser to the corresponding same color value — including scrolling the color swatches to so as to the this color be in the first row. The new color choosers are supported in the individual component inspector(‘i’) 
On iPad, dismiss the color chooser by pressing ‘Done’. Dismissing by just tapping outside the setting popup will not set the color. (2) Portfolio smooth scrolling Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal. Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On. When smooth scrolling is enabled, Portfolio left and right transition effects(In Settings(’S’) -> Portfolio -> Right or Left transition) won’t be applied(since they can not mean anything) Bug fixes: ————- Color chooser was broken on iPad. This is fixed. Thanks to developer updates from Apple, this release re-instates saving and sending composites as PDF. This also means composites will be presented in landscape in the composite roll. You can update the composite to the pdf format by ‘edit’ing it and saving it(i.e., bring it to the composite workspace, edit, save). Known Issue: ——————- Color value components can not be set to 255(0xFF). Max value it can be set to is 254(0xFE). If it is set to 255, the app modifies the value to 254. This is due to underlying iOS issues which render color gray at 255. We will make an updated release if and when it is fixed in iOS. Note that the color depends on the ration of color values and not so much on the value itself. So, this affects only a very small fraction of all available colors. See also: --------- Please go through the version history for information about blending and filters since this is the only place this info is currently available, in particular for 7.7.7111(blending and media attachment to the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud), and 7.6.75(Image filters), 7.5.75(quick component dimension modification)