This version includes the following improvements: - A new overview of battery-powered devices is available in the settings. It shows the current battery status and the required battery types, allowing you to plan battery replacements in advance. - For the wall thermostat HmIP-BWTH, the display of the switching state for normally open valves can be reversed. - Minor bug fixes. Thank you for using pocket control HM. If you enjoy the app, we would appreciate it if you could take a moment to leave a rating and provide your feedback.

Fixed a problem with receiving push notifications.

In this version you benefit from the following improvements. - The HmIP-WSM irrigation actuator has been integrated. - For roller shutters, blinds and awnings, a threshold value can be defined above which the device is considered closed. - Minor bug fixes Thank you for choosing pocket control HM. You like pocket control HM? Then please take a moment and evaluate our app. We are looking forward to your feedback.

In this version you benefit from the following improvements. - The ELV-SH-TACO external temperature and acceleration sensor has been integrated. - The HmIP-PSMCO external switching/measuring cable has been integrated. - The HmIP-LSS light strip set has been integrated. - The HmIP-FLC universal motor lock controller has been integrated. - The HmIP-FDC universal door opener controller has been integrated. - The ELV-SH-CTH compact temperature and humidity sensor has been integrated. Thank you for choosing pocket control HM. You like pocket control HM? Then please take a moment and evaluate our app. We are looking forward to your feedback.

In this version you benefit from the following improvements. - A problem with HmIP-STHO-A has been fixed. - New devices have been integrated. Thank you for choosing pocket control HM. You like pocket control HM? Then please take a moment and evaluate our app. We are looking forward to your feedback.

In this version you benefit from the following improvements. - A problem with temperature and humidity sensors has been fixed. - Under iOS 18, the setting for the widget can be opened to read the corresponding note. - A problem with the localization of the protocol has been fixed. - The indoor temperature and humidity sensor in anthracite is now supported. - Minor bug fixes Thank you for choosing pocket control HM. You like pocket control HM? Then please take a moment and evaluate our app. We are looking forward to your feedback.

In this version you benefit from the following improvements. - Under iOS 18, the setting for the widget can be opened to read the corresponding note. - A problem with the localization of the protocol has been fixed. - The indoor temperature and humidity sensor in anthracite is now supported. - Minor bug fixes Thank you for choosing pocket control HM. You like pocket control HM? Then please take a moment and evaluate our app. We are looking forward to your feedback.

In this version you benefit from the following improvements. - Adaptations to new iOS version. - A problem with saving programs on RaspberryMatic has been fixed. - The unequal operator from RaspberryMatic is now supported. - Small bug fixes Thank you for choosing pocket control HM. You like pocket control HM? Then please take a moment and evaluate our app. We are looking forward to your feedback.

In this version you benefit from the following improvements. - The HmIP-SMO230 motion detector has been integrated. - Minor corrections when creating PDF lists. - The device list can now also be searched by device type. - The geofencing zones can now have a radius of up to 30 km. - In quick access via the house or views, the first value of the setpoint temperature could not be set. - Small bug fixes Thank you for choosing pocket control HM. You like pocket control HM? Then please take a moment and evaluate our app. We are looking forward to your feedback.

In this version you benefit from the following improvements. - The HmIP-ESI-IEC smart meter interface has been integrated. - Values for today, yesterday, the last 7 days and the last 30 days have been added to the energy meter display. - The HmIP-DRG-DALI DALI gateway has been integrated. - It is now possible to import a configuration using the plus button in the settings. - Small bug fixes Thank you for choosing pocket control HM. You like pocket control HM? Then please take a moment and evaluate our app. We are looking forward to your feedback.

In this version you benefit from the following improvements. - A problem with the selection of devices in the sidebars has been fixed. - This version extends the functionality of the actions. Devices and system variables can be added multiple times to an action. A delay can be assigned to a command, similar to programs in the CCU. This makes it possible to start a time sequence with an action. - The Homematic IP Wired CO2 Sensor HmIPW-SCTHD is supported. - The time of the last movement is displayed more precisely in the motion detector. - Small bug fixes Thank you for choosing pocket control HM. You like pocket control HM? Then please take a moment and evaluate our app. We are looking forward to your feedback.

In this version you benefit from the following improvements. - A display problem with the sidebars has been fixed. - This version extends the functionality of the actions. Devices and system variables can be added multiple times to an action. A delay can be assigned to a command, similar to programs in the CCU. This makes it possible to start a time sequence with an action. - The Homematic IP Wired CO2 Sensor HmIPW-SCTHD is supported. - The time of the last movement is displayed more precisely in the motion detector. - Small bug fixes Thank you for choosing pocket control HM. You like pocket control HM? Then please take a moment and evaluate our app. We are looking forward to your feedback.

In this version you benefit from the following improvements. - This version extends the functionality of the actions. Devices and system variables can be added multiple times to an action. A delay can be assigned to a command, similar to programs in the CCU. This makes it possible to start a time sequence with an action. - The Homematic IP Wired CO2 Sensor HmIPW-SCTHD is supported. - The time of the last movement is displayed more precisely in the motion detector. - Small bug fixes Thank you for choosing pocket control HM. You like pocket control HM? Then please take a moment and evaluate our app. We are looking forward to your feedback.

In this version you benefit from the following improvements. - Adaptations to iOS 17. - Small bug fixes Thank you for choosing pocket control HM. You like pocket control HM? Then please take a moment and evaluate our app. We are looking forward to your feedback.

In this version you benefit from the following improvements. - A problem with the Homematic IP LED controller HmIP-RGBW has been fixed. - Small bug fixes Thank you for choosing pocket control HM. You like pocket control HM? Then please take a moment and evaluate our app. We are looking forward to your feedback.

In this version you benefit from the following improvements. - The Homematic IP LED controller HmIP-RGBW has been integrated. - The current meter reading can be specified in energy meters and switch meter actuators. - Small bug fixes Thank you for choosing pocket control HM. You like pocket control HM? Then please take a moment and evaluate our app. We are looking forward to your feedback.

In this version you benefit from the following improvements. - New Homematic IP devices, such as the shutter actuator HmIP-BROLL-2 have been integrated. - In text objects the battery level of the iPad can be used for display. - In the weather station, the wind direction pointer can be shown in reverse as a weather vane. - In programs, the button commands can be used for the start and end of the long button press. - In programs, the triggering conditions are highlighted graphically so that the fumction is easier to see. - Falling below the actual temperature is also shown in status displays in warning color. This can be switched off in the options. - Small bug fixes Thank you for choosing pocket control HM. You like pocket control HM? Then please take a moment and evaluate our app. We are looking forward to your feedback.

In this version you benefit from the following improvements. - Critical notices can be sent. For this purpose, the text of the message must contain the keyword "critical()". The function should only be used for really important messages. - Push messages can be deleted directly in the message center. - The time in push messages now always corresponds to the send time. - With the current firmware of the CCU3 you can see Duty Cycle and Carrier Sense graphically in the CCU dialog. - Fixed a problem with the status of the Homematic siren in actions. - Small bug fixes Thank you for choosing pocket control HM. You like pocket control HM? Then please take a moment and evaluate our app. We are looking forward to your feedback.

In this version you benefit from the following improvements. - Adaptations to neu iPhones - A separate price can be stored for the energy meters for electricity, which is independent of the price in the CCU. - A problem with the energy sensor HM-ES-TX-WM has been fixed.• A problem with the display of the heating/cooling status of the HmIP-BWTH has been corrected. - Receiving push notifications has been revised. - The weather icons have been revised. - The 'Equals' relational operator can now also be used in programs. - A separate device name can be entered for the name of backups and geofencing zones. - Small bug fixes Thank you for choosing pocket control HM. You like pocket control HM? Then please take a moment and evaluate our app. We are looking forward to your feedback.

In this version you benefit from the following improvements. - New Homematic IP devices such as the keypad HmIP-WKP and universal actuator HmIP-WUA have been integrated. - The threshold values for displaying the weather symbol can be adjusted in the weather station. - A problem with the display of the webcam has been corrected. - A problem with the lux value for a self-defined weather station has been corrected. - The display of the heating/cooling status of the HmIP-BWTH has been adjusted. - Small bug fixes Thank you for choosing pocket control HM. You like pocket control HM? Then please take a moment and evaluate our app. We are looking forward to your feedback.

In this version you benefit from the following improvements. - New Homematic IP devices such as the keypad HmIP-WKP and universal actuator HmIP-WUA have been integrated. - The threshold values for displaying the weather symbol can be adjusted in the weather station. - Small bug fixes Thank you for choosing pocket control HM. You like pocket control HM? Then please take a moment and evaluate our app. We are looking forward to your feedback.

In this version you benefit from the following improvements. - New Homematic IP devices such as HmIP-FWI and HmIP-STI have been integrated. - The weekly programs of Homematic IP heating groups can now be changed. - A problem with the holiday mode of Homematic IP thermostats has been corrected. - A display problem with the HmIP-WRC6 wall button has been corrected. - An acoustic alarm can be triggered with a dialogue for the HmIP-ASIR siren. - A problem with the graphical representation of programs has been fixed. - Small bug fixes Thank you for choosing pocket control HM. You like pocket control HM? Then please take a moment and evaluate our app. We are looking forward to your feedback.

In this version you benefit from the following improvements. - With a new graphic overview you can see the programs and the system variables and devices used in them. You can find the overview in the settings of devices and system variables. Arrows indicate whether a system variable or device is the trigger, condition, or activity. Time modules are symbolized. This gives you an easy overview even if you use more than one hundred programs in the CCU. With a double tap you can switch directly to the settings of the objects and there again to the graphic representation of this object. - A problem with the vacation mode of thermostats has been fixed. - The vacation mode now also works with heating groups. - A problem with changing the name of system variables has been fixed. - A display problem with image views on the new iPad mini has been fixed. Thank you for choosing pocket control HM. You like pocket control HM? Then please take a moment and evaluate our app. We are looking forward to your feedback.

In this version you benefit from the following improvements. - With a new graphic overview you can see the programs and the system variables and devices used in them. Arrows indicate whether a system variable or device is the trigger, condition, or activity. Time modules are symbolized. This gives you an easy overview even if you use more than one hundred programs in the CCU. With a double tap you can switch directly to the settings of the objects and there again to the graphic representation of this object. You can find the overview in the settings of devices and system variables. - Programs can be duplicated. - With the smoke detector HmIP-SWSD, the burglar alarm can be switched on and off. - The gong and signal light HM-OU-CF-PL etc. can be switched with dialog. - An interval can be set for periodic loading for webcams with the URL type. - Some new Homematic IP devices have been integrated, including the HmIP-DLS door lock sensor. - Adjustments to iOS 15 - Small improvements and bug fixes Thank you for choosing pocket control HM. You like pocket control HM? Then please take a moment and evaluate our app. We are looking forward to your feedback.

In this version you benefit from the following improvements. - With an automatic backup, the current configuration can be saved in iCloud on a weekly basis. The function can be found in the settings under Code and Backup. The backup can also be started manually there. - With automation, the time switching points can also be made dependent on a system variable. This allows automations to be created that also take vacation times or other conditions into account. - Some new Homematic IP devices have been integrated, including the wired wall switch HmIPW-WRC6. The state of the LEDs is simulated accordingly. - Small improvements and bug fixes Thank you for choosing pocket control HM. You like pocket control HM? Then please take a moment and evaluate our app. We are looking forward to your feedback.