What's new in this update: • If you are signed out, for example because your session ended, the app now tells you so and asks you to sign in again • If your company uses its own map (Mapbox, HERE or OpenStreetMap), the map's Default view now shows it • When the server is busy, the app waits and tries again instead of showing a general error • The app loads your profile and routes once at start-up instead of several times • If you tap a stop and press Arrived while an earlier stop is still open, the app asks first and names both stops • The screen reader now reaches the titles, buttons and fields inside dialogs and pop-up panels, such as duty status, order details and a failed pickup or delivery • On a stop's details, a new button opens the chat with the office about that order • After you complete a stop, you can rate the location from 1 to 5 stars and add a note • The map shows when your phone is offline and which scans, expenses and duty status changes are still waiting to be sent • The map has a new look: cards along the bottom show your stops and how far away each one is, with the next stop outlined, and the stop pins are numbered • A bubble over the next stop shows the planned drive time for that leg, or the minutes until you arrive when an arrival time is predicted • The map buttons (layers, center on your location, 3D, zoom, and route chat and rest stops when they are turned on) sit in one column that stays clear of the stop cards, banners and tab bar • The zoom buttons now also work when your company uses the phone's built-in map • The arrival banner has a Reroute button

What's new in this update: • If you are signed out, for example because your session ended, the app now tells you so and asks you to sign in again • If your company uses its own map (Mapbox, HERE or OpenStreetMap), the map's Default view now shows it • When the server is busy, the app waits and tries again instead of showing a general error • The app loads your profile and routes once at start-up instead of several times • If you tap a stop and press Arrived while an earlier stop is still open, the app asks first and names both stops • The screen reader now reaches the titles, buttons and fields inside dialogs and pop-up panels, such as duty status, order details and a failed pickup or delivery • On a stop's details, a new button opens the chat with the office about that order • After you complete a stop, you can rate the location from 1 to 5 stars and add a note • The map shows when your phone is offline and which scans, expenses and duty status changes are still waiting to be sent • The map has a new look: cards along the bottom show your stops and how far away each one is, with the next stop outlined, and the stop pins are numbered • A bubble over the next stop shows the planned drive time for that leg, or the minutes until you arrive when an arrival time is predicted • The map buttons (layers, center on your location, 3D, zoom, and route chat and rest stops when they are turned on) sit in one column that stays clear of the stop cards, banners and tab bar • The zoom buttons now also work when your company uses the phone's built-in map • The arrival banner has a Reroute button

What's new in this update: • If your company uses its own map (Mapbox, HERE or OpenStreetMap), the map's Default view now shows it • When the server is busy, the app waits and tries again instead of showing a general error • The app loads your profile and routes once at start-up instead of several times • If you tap a stop and press Arrived while an earlier stop is still open, the app asks first and names both stops • The screen reader now reaches the titles, buttons and fields inside dialogs and pop-up panels, such as duty status, order details and a failed pickup or delivery • On a stop's details, a new button opens the chat with the office about that order • After you complete a stop, you can rate the location from 1 to 5 stars and add a note • The map shows when your phone is offline and which scans, expenses and duty status changes are still waiting to be sent • The map has a new look: cards along the bottom show your stops and how far away each one is, with the next stop outlined, and the stop pins are numbered • A bubble over the next stop shows the planned drive time for that leg, or the minutes until you arrive when an arrival time is predicted • The map buttons (layers, center on your location, 3D, zoom, and route chat and rest stops when they are turned on) sit in one column that stays clear of the stop cards, banners and tab bar • The zoom buttons now also work when your company uses the phone's built-in map • The arrival banner has a Reroute button

What's new in this update: • Screen readers can reach every option in the press-and-hold message menu • In chat, tap someone's name or photo to see who they are: photo, name, driver or office, and for a driver, whether they are online or when they were last seen • Without a fresh GPS fix, the map now opens on your phone's position from the last 10 minutes instead of your first stop; automatic arrival still waits for a live fix • If a stop's details did not load, the app now says so and asks you to go back and refresh the route • When the app asks for your camera, photos, microphone or location, the message now says what it is used for, with an example • Duty status changes you make without signal are sent as soon as the app can: when you open it, come back to it, get signal back or open Hours Of Service, and always in the order you made them • Hours Of Service shows how many duty status changes are still waiting to sync, with Retry sync, even when you have signal • When you send information to US DOT, the app warns you if some duty status changes have not reached the server yet • The location sharing explanation now also says who else can see your vehicle's position if your company uses shipment tracking links • Chat has a new look: press and hold a message to copy, forward or save it, add emoji from the message box, and open a chat's info screen to see who is in it • Refreshed screens: Explore remembers your recent searches, the side menu has a search field and shows your name and email, Nearby Rest Stops has new cards, trainings show in one list with your progress, each violation shows where it happened, and the Settings, Scanning, Notifications and DVIR screens are clearer • After you paste your invitation link, the invite code field shows the code the app picked out of it • On a shared phone with "Keep me signed in" turned off, reopening the app no longer signs the phone up for the previous driver's notifications • Screens no longer show an empty band above the header on iPhones with a notch or Dynamic Island • Continue Stop, New group and the map arrival banner sit above the tab bar instead of behind it • Popups and menus stand out clearly from the screen behind them • In an order's View Details, the Call button works and a WhatsApp button sits next to Message

What's new in this update: • Scanning documents from Settings > Scan Documents works end to end: capture, crop and rotate no longer fail, and the PDF opens in the share sheet with Share again and Finish

What's new in this update: • Completed stops are easy to spot: in the stop list a completed stop shows when it was finished, and on the map its pin turns green with a check mark while keeping its number • In chat, type @ to pick someone in the conversation. Names you mention are highlighted in the message • Location Sharing and several labels are easier to read in dark mode

What's new in this update: • You can paste the whole invitation link into the invite code field. The app picks out the code for you • Duty-status changes you make without signal are no longer lost: each one is sent, in the order you made it, once you are back online • With "Keep me signed in" turned off, reopening the app signs you out completely, so nothing carries over to the next driver on a shared phone

RushHour 2.0 is a complete redesign of the driver app, rebuilt from the ground up: • A faster, clearer stop workflow — photos, signatures, charges and paperwork scanning in one guided flow • New notifications center with a bell feed for everything that needs your attention • In-app messaging, including chats for your routes — now with photo attachments • Vehicle inspections (DVIR) built in • Barcode scanning with scan history • Global search across the whole app • Dark mode, and big performance improvements throughout Also in this update: shipment details on the order screen, and document preview before upload. You can now see and control background location sharing from Settings > Location Sharing. The Privacy Policy and Terms of Service are available from Settings too. This release also fixes: • Location updates are sent again while you are on a route • Signing out stops location sharing, and on a shared phone each driver only sees and sends their own data • Push notifications register correctly after signing in • The welcome carousel no longer appears when you are already signed in • The Terms of Service link opens correctly, and Help opens the RushHour support page • After you complete a stop, the app no longer says the route is complete while stops are still left

This update focuses on reliability across your daily route. • Report an Issue — photos now attach correctly and reports submit reliably • Routes — more accurate arrival detection and steadier background location tracking • Stops — completed stops now appear correctly for the assigned driver • Deliveries — additional charges save reliably when you complete a stop • Location — location permission is picked up automatically after you enable it in Settings

Version 0.1.3 includes improvements across Routes, messaging, and driver workflows. - Improved the Routes map with clearer active-route focus, numbered stop markers, route progress, and better route selection. - Added clearer background location disclosure before route tracking starts. - Improved pickup and delivery flows, including resume handling and stop item context. - Enhanced item inspection, pallet sub-items, and quantity editing. - Improved messaging reliability, layout, safe-area handling, and attachment support. - Added better handling for blind stops and held deliveries so driver-facing information stays accurate. - Fixed route duration, map geometry, payment, and stop-detail UI issues. - General stability, UI polish, and bug fixes.

Bug fixes and stability improvements for route management, map navigation, reminders, and the driver workflow.

- Upgraded to Expo — Faster updates and improved app stability - Redesigned Dashboard — Job stats with date filtering and quick-access feature grid - Orders & Delivery — New card-based pickup/delivery UI with photo uploads, signatures, and additional charges - Vehicle Inspections (DVIR) — Guided inspection flow with photo attachments and resume support - Hours of Service — Real-time HOS tracking, driving log summary, and DOT transmission - Barcode Scanning — Scan and verify pallets with offline queue support - Messaging — In-app chat with dispatch and nearby driver groups - Notifications — Push alerts for status changes, daily DVIR reminders, and proximity alerts - Violations & Training — View violation history and suggested training videos - Dark Mode — Full dark/light mode across all screens - Music & Games — Radio streaming and mini games for rest breaks - Nearby Amenities — Find rest stops, fuel, and food nearby - 3D Map View — Geodesic polylines and satellite toggle - Document Scanning — Scan, crop, and upload documents - Performance — Faster loading, offline sync, and tablet-responsive layouts

- Polished end-of-day flow with refined UI and improved responsiveness. - Dark mode support across end-of-day screens. - Real-time driving stats integrated with HOS-derived data. - Added vehicle info screen with edit support and live sync status check. - Various UI refinements and bug fixes for a smoother daily workflow.

- Persist order flow progress — resume pickup/delivery where you left off after app restart - Additional charges integration on order stops - Violations module — view and track violations with details, fines, and severity - Forgot password flow - Performance optimizations, memory leak fixes, and dark mode improvements - Bug fixes and stability improvements

- Dashboard Date Filtering — Navigate through daily stats with day-by-day filtering arrows - Mini Games — 8 playable HTML5 games (Trivia, Memory Match, Word Search, 2048, Sliding Puzzle, Snake, Tic-Tac-Toe, Sudoku) with score tracking - Music & Radio Streaming — Listen to music and radio stations while on the road - Dark Mode for Pickup & Delivery Flows — Full dark mode support across all pickup and delivery screens - HOS US DOT Transmission — Send HOS logs directly to US DOT from within the app - Personal Info Screen Improvements — Fields are now always editable with a streamlined save experience

- Added dark mode with appearance switcher (Dark, Light, System) - Redesigned sidebar, DVIR inspection, and Trainings screens - Integrated document scanner with crop/rotate for paperwork - Added Terms of Service & Privacy Policy links - UI fixes: logout modal icon, settings scroll, send button alignment

New HOS compliance module with real-time timers and background polling. Added missing personal info fields. Updated app icon. Improved tablet/iPad responsiveness, toast notifications, and damaged content handling. Multiple bug fixes for stability.

• Added comprehensive load unit management with pallet configuration, barcode scanning, and offline sync capabilities • Implemented automatic driver status monitoring with secure auto-logout for inactive accounts • Enhanced package location tracking with recommended positioning and smart prefill • Added additional charges management for delivery and pickup stops • Integrated push notification system for real-time updates • Improved app performance with reorganized project structure and bug fixes • Fixed loading issues and enhanced user interface with branded modals throughout