With SpikerBot 1.7.7, your robot can get new firmware over its own Wi-Fi. No cable, no computer. UPDATE YOUR ROBOT OVER WI-FI This version of the app carries robot firmware V1.2.0 and can install it straight onto your robot. Connect to your SpikerBot, open robot settings, and tap Update firmware. Keep the batteries above 25% and leave the app open until the robot restarts. Robots still on V1.0.0 or V1.1.0 need one last update over USB, from SpikerBot on a Mac or Windows computer. After that, Wi-Fi handles every update. A STEADIER ROBOT - Fixed a firmware bug that could make the robot restart or shut off during Play. - If the app loses its connection, the wheels stop. They no longer keep running on the last command. - When a phone walks away, the robot notices sooner and its lights and motors go back to idle on their own. - The green "connected" light is a soft glow again, not nearly invisible. - Battery readings recover faster after power-on and when you connect. BRAINS AND THE DESIGN SCREEN - Side color targets (like Side Color Red) now drive the neurons wired to them. Before, the camera saw the color and nothing happened. - Pause holds the brain exactly where it is, and Play picks up from there instead of starting over. The Pause and Play animation is back too. - Saved brains reopen exactly as you saved them, every neuron setting included. - Opening or importing a .brain file on a new install works again. - Thin connections are easier to tap. - Camera, microphone, and distance settings keep your edits, and your camera choice survives a reconnect. - Tapping certain empty corners of the design area could close the app. Not anymore. - Fixed crashes while drawing some brains. DON'T FREAK OUT (KNOWN ISSUES) - After a firmware update the app may say it could not confirm the install. Check the firmware version in robot settings. If it still shows the old version, run the update again. - After an update the robot may need a press of its power button to start. - A custom robot name may go back to the default after an update. - Battery percentage can read low for the first moments after power-on. - If the robot won't turn back on from its button after a shutdown, take the batteries out and put them back.