• Wi-Fi setup lists the networks your gate hears, with their signal: tap one to fill in its name (needs up-to-date gate firmware). • Redesigned network settings, with the gate's Wi-Fi status on top. • New Wi-Fi signal test in Diagnostics. • Simpler phone entry to invite installers and transfer ownership. • Invite the manager of your ZoomIN Web Portal by email; they choose their own password. • Door sounds follow your ringer volume and silent mode. • Readability improvements and fixes.

This release contains internal improvements and stability fixes.

• Invite a guest for a stretch of days: one calendar, two taps, with hours for each end. • The date and hour pickers now use your phone's clock instead of UTC. • Editing a guest opens on the window they already have. • A permanent key is no longer refused for being out of contact with the server. • One key allowance per residence, shared between residents and visitors. • Signing in offers the name already on record for your number. • User manual updated, with the car screen documented.

• Your gate history now pairs the app's and the gate's report of one opening into a single named entry. • A key shared with you imports itself — no accept or decline step. • Lists, invitations and gate tools follow the role you hold in that house. • A firmware update is only offered once the gate has reported its version. • Forms show errors under the field that caused them. • Clearing your data no longer removes a house you only visit. • The status bar is readable again over the app.

• Your watch now clears its gates and keys when your access is revoked. • Revocation notices reach you on any screen, not just Home. • Clearer reasons when a gate won't open — including when it no longer recognizes your key. • Owners can revoke a visitor's access straight from the Access tab. • Gate buttons stay put instead of moving as the signal changes. • Diagnostics now reach support on their own, without opening the screen. • More reliable Bluetooth and readable setup errors.

• Gates that lose their connection now show "Not responding" instead of looking ready, so you know before you try. • Adding a gate now asks which visitors should open it — a new gate starts closed to everyone. • Residents open every gate on the property automatically. • Access changes and revocations apply more reliably. • Steadier Bluetooth gate detection. • Installers can now update gate firmware.

• New Diagnostics: check each gate's Bluetooth signal, run connection and stability tests, and share a detailed log with support. • Clearer messages when a gate won't open, with one-tap reporting. • More reliable firmware updates — auto-reconnect if Bluetooth drops, plus a progress estimate. • Tap any access code to copy or delete it; you can now remove your last PIN or fob.

• You can now find a gate's emergency keypad reset code right from its detail screen (owner only), so it's never lost after installation. • Performance and stability improvements under the hood.

• International phone numbers — sign in and add residents, visitors, and administrators using a phone number from any country. • Your properties now appear newest first, so your latest additions are at the top. • More reliable sign-in when setting up on a new phone — fixes a leftover property showing up after account recovery. • A clearer message when you reach your key limit.

• Location-based door access — set your property's GPS location and optionally require residents to be within range before they can open the door. • Fresh new app icon featuring the updated ZoomIn Manager logo. • Stability and reliability improvements.

Fixes an issue where firmware updates could get stuck on "Reading device version". Updates now work reliably.

- ZoomIn panel access: set the email and password for your ZoomIn web panel login, right from Settings. - Smoother setup: a clearer exit button in the setup wizard, with a safeguard against accidentally keeping the master key. - Better offline feedback: a clear "device offline" message and a one-tap shortcut to Network Settings when a gate loses connection. - More reliable firmware updates: retry in place after a recoverable error, and the "update available" badge only shows when needed.

- Edit your residence's name and address from the property detail screen - Device scan now hides devices you already own, preventing accidental re-adds - Setup wizard now detects already-provisioned devices - Access codes (PINs) unified into a single 300-slot pool - Improved sync-drift detection catches external PIN/FOB changes more reliably - Redesigned Home quick actions in a single row; "Leave Open" now available to all non-visitor roles - Clearer Wi-Fi setup labels and minor improvements

• Improved property transfer: when ownership is transferred to a new owner, they can now open gates over the internet from the Gates tab — no need to re-set up the device. • Readability improvements on the firmware update screen and minor fixes.

• Redesigned Access tab (formerly "Keys"): view access by person or by gate, and see at a glance who has Full or Partial access. • Quickly switch between properties right from the Access screen. • New Interface settings to personalize the app, choose your default Access view and show or hide the Gates tab. • Cleaner, reorganized Settings. • New "Recover devices" screen to restore stranded gate devices. • Access codes (PINs) can now be 4 to 6 digits. • Clearer sign-in error messages. • Bug fixes and stability improvements.

• See PIN and key fob capacity on each device, with warnings before you hit the limit. • Codes are now easier to spot in the keys list. • Setup is more reliable — the wizard now recovers from brief connection hiccups. • Recovery Keys appear in the Keys tab immediately. • Fixes for the Recover button, firmware updates, and offline credential sync. • Visual refresh and better readability across the app.

- Update your gate's firmware directly from the app, over Bluetooth. - New Gates tab to open any of your gates remotely, from anywhere. - Choose which gates each resident and visitor can access. - New Recovery Key to prevent lockouts if a device is lost or reset. - Refreshed look, smoother setup, and several stability improvements.

- Leave-Open safety flow: new disclaimer modal, brief reminder, and dedicated Safety & Liability settings page so leaving a gate open is always an informed decision. - Phone number is now required at setup, providing a more reliable identity binding for every user. - Entitlement-aware quotas: residents and visitors limits in the UI now reflect your active plan in real time.

- New Activity tab with a real-time history of gate openings. - Real-time cloud sync for properties, gates, PINs and key fobs. - Various polish fixes in the activity feed and input fields.

What's New - WiFi setup over Bluetooth: configure the gate's WiFi network from the app, both during initial setup (new optional step in the wizard) and afterwards from the new Network Settings page in Gate Detail. Real-time WiFi status feedback so you know when the gate is connected. - Remote reboot: reboot the gate from the app via Bluetooth. - View PINs and key fobs directly from Gate Detail through a quick bottom sheet. - Leave-open mode: improved active-session UX with live countdown and one-tap extend. - Home page redesign: new ZOOM IN logo banner; "New Visitor" quick action is now "Visitors".

- Your property, gates, residents, visitors, PINs and FOBs are safely backed up. Reinstall or switch devices without losing anything. - Open your gates reliably even without internet. - Smoother experience when adding or updating PINs and FOBs, with clear progress feedback. - Residents and visitors get a cleaner experience, with an easy way to leave a property. - Dark-mode splash screen, refreshed Administrators page, and overall polish.

- Gate open button now changes color based on proximity — see at a glance when you're in range - New visitor types: one-time (single-use) and recurring schedules with "always" access - Per-visitor gate selection — assign specific gates when creating visitors - Configurable auto-open range in settings with Apple Watch sync - Ownership transfer flow after initial setup - Redesigned administrators page - Properties menu now accessible to all users - Improved BLE reliability: scan-only monitoring with connect-on-action, faster detection, and better disconnect handling - Key management overhaul with unified store - Multiple bug fixes and performance improvements

- Lost Gate Management: Mark gates as lost and recover them without contacting support. - Redesigned Home Screen: New multi-gate layout with improved visuals. - Gate Selector for Leave Open: Choose which gate to leave open from the home screen. - Improved Device Setup: Streamlined Bluetooth pairing with auto-scan. - Bug Fixes: Visitor expiration display, phone sync for contacts, activity log filtering, and BLE connection stability. - Reliability: Offline queue with auto-retry and Firestore auto-reconnect.

- Multi-role permission system: owners, installers, and administrators with distinct access levels per property - Redesigned setup wizard and new invite flow for installers - Contact-first resident creation flow - Improved Bluetooth connectivity and error diagnostics - Performance upgrades and bug fixes

- Faster gate opening: Optimized Bluetooth connection with persistent pre-connection, reducing open times significantly - Phone-based visitor invitations: Share access with visitors using their phone number — no more QR codes or links needed - Editable visitors: Update visitor name and phone after creation - Real-time Bluetooth monitoring: See live device connection status on the home screen - Redesigned home page: Cleaner, more intuitive interface - Improved diagnostics: Built-in BLE connection test wizard and detailed diagnostic logs for troubleshooting - WearOS & watchOS improvements: Faster response times, better battery efficiency, and improved compatibility with older Android devices