CNC Machinist Calculator App
Speeds and Feeds for Milling
Free · In‑App Purchases · Designed for iPad. Not verified for macOS.
The right RPM and feed, at the machine, in under three seconds, and the math to prove it.
Punch in what you're cutting and what you're cutting it with. CNC Speeds & Feeds converts published starting values into spindle RPM and feed rate instantly, and every result opens up to show the formula with your numbers in it. No account, no ads, it works in the shop, gloves on, with or without Wi-Fi.
CUTTING
• Milling: RPM & IPM from material, tool Ø and flutes, with radial chip thinning (RCTF)
• Turning: RPM at diameter (G96-ready), feed per rev, cut-time estimate
• Drilling: 179-size letter/number/fraction/metric drill picker, feed and peck guidance
• Tapping: tap drill at 50–85% engagement plus rigid-tapping feed
• Surface Finish: theoretical Ra/Rt from feed and nose radius, and the reverse
THREADS & MEASUREMENT
• Threads: UN & ISO metric data: pitch Ø, minor Ø, tap drills, computed live
• 3-Wire: best wire size and measurement-over-wires, forward and reverse
• Drill Point: tip length from diameter and point angle, so your depths land right
LAYOUT & SHOP MATH
• Bolt Circle: hole coordinates with a live drawing, copy straight to your program sheet
• Triangle: right-triangle solver from any two of side, side, hypotenuse or angle
• Stock Weight: weight by material for round bar, rectangular bar, tube or plate
REFERENCE
• G & M Codes: 59 G- and M-codes explained in a searchable shop reference
REAL DATA, SHOWN TRANSPARENTLY
Cutting data is compiled from published manufacturer guidelines across 21 materials and shown as RANGES with a conservative default, because vendors can disagree, and one wrong number is how tools snap. You can override any value, that's by design.
BUILT FOR THE SHOP FLOOR
• 100% offline
• Big glove-friendly controls, high-contrast dark mode
• Imperial and metric everywhere
• Every calculator remembers your last inputs
Requires Subscription or One-Time Payment: Start with a 14-day free trial, every calculator, every material, the full thread & drill data and the G & M-code reference. Then keep it your way: buy once with Lifetime, or subscribe monthly/annually. Works offline. Family Sharing supported.
----- Legal Notice -----
Terms of Use (EULA): https://www.apple.com/legal/internet-services/itunes/dev/stdeula/
- Switch between inches and millimeters right on every calculator: tap in / mm in the top bar. Your inputs stay put and every result re-renders in your units.
- On the keypad, type a value in the other unit and it converts when you tap Done, so a 6 mm end mill in an inch shop is one tap away.
- Material, thread and drill lists now follow your units too.
The developer, Blue Mantiq LLC, indicated that the app’s privacy practices may include handling of data as described below. For more information, see the developer’s privacy policy .
Data Not Collected
The developer does not collect any data from this app.
Accessibility
The developer has not yet indicated which accessibility features this app supports. Learn More
Information
- Seller
- Blue Mantiq LLC
- Size
- 18.4 MB
- Category
- Utilities
- Compatibility
Requires iOS 17.0 or later.
- iPhone
Requires iOS 17.0 or later. - iPad
Requires iPadOS 17.0 or later. - Mac
Requires macOS 14.0 or later and a Mac with Apple M1 chip or later. - Apple Vision
Requires visionOS 1.0 or later.
- iPhone
- Languages
- English
- Age Rating
4+
- 4+
- In-App Purchases
Yes
- Pro Monthly $1.99
- Pro Yearly $9.99
- Lifetime $19.99
- Copyright
- © 2026 Blue Mantiq LLC
