TinyOhms

Breadboard circuit simulator

Free · In‑App Purchases · Designed for iPad. Not verified for macOS.

TinyOhms opens straight onto a breadboard. Drop in a battery, a resistor and an LED, and the circuit runs the moment the loop closes. Current flows along the wires as moving chevrons, the LED glows brighter or dimmer with the real numbers, and if you push too much current through it, it pops. Nothing to install, nothing to solder, nothing to break. REAL PARTS, REAL MATH Every component behaves like the one in the drawer: resistors follow Ohm's law, LEDs have a forward voltage, transistors amplify, capacitors charge and drain, and the 555 timer ticks at the frequency its resistors and capacitor set. Under the hood is a full circuit solver (the same kind of nodal analysis SPICE uses), so the readouts are the ones you would measure with a meter. SEE WHAT IS HAPPENING • Live current flow on every wire, with direction and strength • Inspect mode: tap the eye to read every node voltage and branch current • A built-in scope that traces voltages over time — watch a capacitor charge, or a 555 output square wave • Real sound: buzzers beep and piezo speakers play the pitch the circuit sets • Room-light and temperature sliders to drive light sensors and thermistors • Short-circuit and overload warnings before anything "burns" BUILT FOR LEARNING TinyOhms is made for teens and any complete beginner. There is no lesson to sit through: build, watch, change one thing, and see what happens. Twenty ready circuits take you from a single LED to a light-following night light, a blinking timer, a one-shot pulse, a pitch control you can hear, and a traffic-light sequencer built from a 555 and a 4017 counter. YOUR OWN LIBRARY Sign in with just your email (a code, no password) to save circuits to your library and open them on the TinyOhms website Workbench too. Export any board as a SPICE netlist or share the board file. ON THE BENCH Free: wire, jumper, batteries (3 V, 4.5 V, 9 V), resistor, LED, switch, push button, buzzer, light sensor (LDR) and NPN transistor — everything the beginner projects need. TinyOhms Pro (optional monthly subscription): potentiometer, capacitor, 1N4001 diode, DC motor, thermistor, piezo speaker, the 555 timer and the CD4017 counter. Circuits from the library always open in full, whether or not you subscribe. TinyOhms Pro renews monthly until cancelled in Settings › Apple Account › Subscriptions. Under 18? Ask a parent first. Terms: https://tinyohms.com/terms/ Privacy: https://tinyohms.com/privacy/ No ads, no tracking, no analytics. Just electrons.

Ratings & Reviews

  • This app hasn’t received enough ratings or reviews to display an overview.

- Library grouped by path - Bug fixes and performance enhancements

Version 3.0.3

The developer, Adhish Technologies, indicated that the app’s privacy practices may include handling of data as described below. For more information, see the developer’s privacy policy .

  • Data Not Linked to You

    The following data may be collected but it is not linked to your identity:

    • Contact Info

Privacy practices may vary, for example, based on the features you use or your age. Learn More

Accessibility

The developer has not yet indicated which accessibility features this app supports. Learn More

Information

Seller
  • Adhish Technologies Private Limited
Size
  • 1.7 MB
Category
  • Education
Compatibility
Requires iOS 17.0 or later.
  • iPhone
    Requires iOS 17.0 or later.
  • iPad
    Requires iPadOS 17.0 or later.
  • Mac
    Requires macOS 14.0 or later and a Mac with Apple M1 chip or later.
  • Apple Vision
    Requires visionOS 1.0 or later.
Languages
  • English
Age Rating
4+
In-App Purchases
Yes
Copyright
  • © 2026 TinyOhms
  • Developer Website
  • Privacy Policy

    • More by Adhish Technologies

    You Might Also Like