The Ketra app connects your keypads to your mobile device, enabling increased flexibility and simple remote control – just download the app, locate your keypads, and control any number of keypads remotely when connected to WiFi.
Requirements:
Ketra lighting system with N4 hub (hardware keypads are not required)
WiFi connection to Ketra lighting system
Ketra account with access to desired installations (free)
more New logo and marketing material. Updated support links
1.4.4.41 05/20/2020
Improved brightness slider for zone keypads
1.4.4.36 04/17/2018
A few bug fixes
1.4.3.35 12/30/2017
- iPhone X full screen support
- Fix keypad message “Object reference not set to instance of object” after new installation created
- Fix bug that sometimes caused a local keypad to appear as remote
- Eliminate 10 second delay when attempting to connect to local hub that’s not available
- Only report hub connection error if last attempt fails
- Hub connection failure message will denote local vs remote connection attempt
- On remote access list, show installation name as disabled when its keypads won't' be available due to remote access not being enabled
- Make “Forgot?” password look like a link
- Enable remote access icon changed from cloud to checkbox with cloud
- When hub connection fails, mark hub as offline instead of disabling the installation
- Fix for keypad crash after publish or when disabling its installation
1.4.2.33 12/22/2017
- Allow remote use of keypads for installations that have enabled remote access
- App will automatically refresh if hub installation is published
- Add ability to sign up for a Design Studio account
- Display the most recent 1500 lines of log file instead of the whole file
1.4.0.31 11/21/2017
- Performance improvement that should eliminate most “operation took too long” messages
- Stop displaying the current keypad after its installation was disabled
- Add tracking of “Request took too long” events
- Log any errors during read of log file
- Update email address for log files
- Send log file as a file attachment instead of text in email body
- Increase log file size from 10Kb to 1Mb
1.3.7.25 10/19/2017
- Warn user that keypad list will be incomplete if viewed before all hubs are connected
- Added missing app icons for iOS on 6sPlus and 7sPlus phones
- Retry hub requests that timeout and retry them (fixes the message “Keypad unable to process request: Unexpected character encountered while parsing value: H. Path"
1.3.6.24 09/14/2017
- Performance improvement: replace REST layer with platform specific implementation (requires firmware upgrade for full effect)
- Performance logging
- Fix potential crash when using dimmer slider
- Fix crash when app requires user to restart it and user doesn’t
1.3.5.23 09/03/2017
- Resetting modified state on keypads without power buttons is a smooth transition instead of power off/power on
- Fix missing keypads when switching between 2 users that share an installation
- Fix crash that could occur when canceling connections during app startup
- Fix bug that kept app from starting when there were no accounts enabled
- Improved help text when an installation has no keypads
- Fix for potential crash on startup if app data was manually deleted
- Fix bug that would cause app to revert to slower performance when used with any hub firmware except version 1.12.3
- Add keypad button press performance logging
1.3.4.22 08/23/2017
- Fix bug where the wrong keypad was selected in certain label hierarchies
- Improved handling of publish events (fixes message “Value cannot be null. Parameter name: source”)
- Preserve hub Enable/Disable state across all hubs in a multi-PAN installations
- Limit connection to saved hubs to just those that are enabled and have installations to which the currently logged in users have access.
1.3.2.20 07/18/2017
- Startup performance improvement: only connect to saved hubs; if none are available, discover all available hubs.
- Fix crash when using an X2 Paddle (dimmer only) keypad
- Extended log information for “Operation took too long” events to aid problem resolution
1.3.1.17 07/02/2017
- Performance improvements
- App will always display a dimmer, even in the rare case that the hardware dimmer isn't available (future firmware update will fix)
- Hub details displays firmware type
- Bug Fixes
- “Connection refused” prevented hub connection
- Power button keypad: turn scene off by dragging dimmer to 0, then reactivate with power button turned scene on at 0%. Turn scene on at 100% instead.
1.3.0.16 06/28/2017
- App displays dimmer slider for all keypads that support dimming e.g. for hardware keypads that don't have dimmer buttons
- After the first scene is activated on a keypad, the app leaves dimmer control available for use even when lights are off so the previously active button can be activated at a given dimmer level by tapping the dimmer
- Setting the dimmer to 0 now deactivates the active button
- New user preference for displaying keypad list in hierarchy vs a simple list (defaults to on)
- Add improved graphics for Introduction carousel navigation dots
- Fix cascaded X2 dimmer paddle keypad prevented display of primary keypad buttons
- Fix bug where two buttons could be highlighted at the same time
- Fix crash that sometimes occurred when cancelling initial hub connection
- Allow app to be launched by other apps via CFBundleURLName key “com.ketra.ketra”
1.2.8.14 06/09/2017
- New Settings-Preferences screen that allows users to customize their app experience
- New user preference that allows users to choose auto-keypad selection (default is on, which selects the last used available keypad as was previously done). If turned off, the app will take user to Keypad Selection screen whenever current keypad is no longer available.
- Updated links to web documents for new Ketra website
- Display website pages in app instead of native browser
- Fix bug that made keypads display "This keypad has no buttons" after a publish
1.2.7.13 04/19/2017
Fix bug that caused X2 dimmer to display 100% when initial value should be zero
1.2.6.12 03/20/2017
- Always present keypad selection list alphabetically, keypads first, labels second
- Internet connection no longer required after first hub connection when hub is on different subnet
- Fix crash when app used with X2 dimmer paddle keypad
- Fix bug that could have allowed an out of date keypad to be shown
- In the keypad selection list, line up the keypad labels underneath the keypad names
- Tapping near the slider end while snap the slider to 100% or 1%.
1.2.5.11 03/13/2017
- Fix bug that kept the last keypad used from always being chosen at startup
- Updated platform infrastructure which resolves time-out problems. These were caused by sockets being closed by the underlying TLS 2.0 implementation when they shouldn’t be.
- Fix crash if app is not fully initialized when device is put to sleep
1.2.3.9 03/02/2017
- When accounts have changed, the app will refresh the installations/keypad data upon return to the Account screen instead of taking you to the Installations screen then returning you to the keypad screen
- Retries to reduce possibility of “took too long” issues
These features require an N4 and Design Studio upgrade, which will be made available soon
Cascaded keypads appear as one keypad
Mirrored keypads appear as one keypad
1.2.2.0 02/13/2017
Note: This release will upgrade your app database, you will be required to re-logon to your accounts.
Enhancements
- Improve Installations refresh progress messages
- Improved login error messages
- Version number is displayed on Accept Terms screen
- Default timer increased from 5 to 10 seconds to improve results with slow networks
Fixes:
- iPhone stops tracking keypad changes after phone locks
- Potential crash when virtual keypads have no buttons
1.2.1.0 02/05/2017
Note: This release will upgrade your app database, you will be required to re-logon to your accounts.
Enhancements
- Improve Installations refresh progress messages
- Improved login error messages
- Version number is displayed on Accept Terms screen
- Default timer increased from 5 to 10 seconds to improve results with slow networks
Fixes:
- iPhone stops tracking keypad changes after phone locks
- Potential crash when virtual keypads have no buttons
1.2.1 02/01/2017
New logo and marketing material. Updated support links
more Version 1.4.4.41 05/20/2020
No Details Provided The developer will be required to provide privacy details when they submit their next app update.
