What's New in 3.1.0 • New Smart Mode: sites in your region connect directly and everything else goes through your proxy. Smart keeps its lists up to date, lets you pick the outbound for services like streaming and AI, and supports your own exceptions. • New Statistics section: traffic history, past connection sessions and live connections, with connection quality judged from each server's TLS handshake times. • Connections: search by host, IP or rule, close a connection, and optionally keep closed connections listed for a while. • Troubleshooting now points to where a problem most likely lies (your network, the server, the configuration, or Potatso), with the clues behind it and suggested fixes. • Works on IPv6-only (NAT64) cellular networks. • Profiles with unusable entries (DNS servers, group names, rules) now skip just those entries and list them on Home, instead of failing to connect. A subscription refresh that can't run keeps the working version. • Speed tests run faster and clear the previous results when you start one. • Fixed connections failing with "initial selection group 'PROXY' does not exist" after switching a profile between Direct and Rule. • Fixed SSR and Shadowsocks servers with cipher "none" losing their password after editing. • Fixed the VPN failing to start on networks that provide no DNS server. • A server whose domain name can't be looked up is now reported as a lookup failure instead of "connection refused".

What's New in 3.0.5 • Fixed subscriptions whose main group is named PROXY failing to connect with "name 'Proxy' is reserved". • Fixed the VPN failing to start when a DNS server is a bare IPv6 address such as 2001:4860:4860::8888. Connection errors now show the real cause. • Fixed DNS stalls under heavy traffic that left apps unable to look up names while the VPN looked connected. • REALITY now works with servers running Xray 26.9.9 or later. • Hysteria 2, AnyTLS and Snell: imports from Xray keep obfuscation and port hopping, the node editor covers more Snell settings, and options that can't be used are reported on import. • New Outbound Mode row on Home: tap it to pick Rule, Global or Direct from a menu, with the latency test right beside it. • Profiles without any rules now always run in Global mode, and the mode picker stays hidden until you add rules. • iPad in landscape: Home shows two columns, and the outbound picker opens as a popover. • Troubleshooting: Run Diagnostics builds a full connection report you can send to support or share. Send Feedback asks for a category first.

What's New in 3.0.4 • New sidebar navigation: Home, every configuration section (proxies, proxy groups, rules, DNS and more), Diagnose and Settings are now one tap away. On iPhone, swipe right or tap the menu button to open the drawer. On iPad, the sidebar sits beside your content. • Rule mode without any rules: the Home card now lets you pick where all traffic goes, just like Global mode. • Shadowsocks: many more ciphers are supported, including AES-GCM-SIV, AES-CCM, XChaCha20-Poly1305, SM4, Camellia, and the CFB/OFB/CTR variants. • Trojan: REALITY settings and ECH links are now kept when you import, export or edit a node. • VLESS: Encryption links, XHTTP and certificate pinning are supported. • VMess: HTTPUpgrade transport is supported, and options that had no effect have been removed. • HTTPS and SOCKS5 over TLS: you can set the server name, certificate pin and custom headers. Imports from Clash, Xray and Surge keep these settings, and HTTP/SOCKS nodes imported from Xray keep their TLS. • Stability and compatibility fixes for every protocol, found by testing against real servers.

Version 3.0.3 brings full ShadowsocksR support and fixes subscription imports.

Version 3.0.2 improves link compatibility, connection reliability and troubleshooting. • Better import and sharing: many more proxy link formats are recognized, and one invalid link no longer drops a whole subscription. You can now choose the link format when sharing a server. • Fixed "PROXY routing requires an explicit primary outbound selection" failing connections in rule mode. Potatso now picks a server automatically after a subscription fills an empty profile, when you leave Personal VPN, or when the selected server is removed or replaced during a subscription refresh. • When no server is chosen, Home now shows your servers as chips so you can pick one right away instead of hitting an error. • Smarter "No Internet" troubleshooting: it now names the server that can't be reached, explains why (timed out, refused, credentials rejected, TLS failure) and suggests what to try. • New "Join Telegram Group" row in Settings.

This update includes some bug fixes and performance updates. === Recent Updates === Potatso 3.0 brings a new core and a redesigned experience. == New Engine, More Protocols == Use VLESS (including Reality), VMess, Trojan, Hysteria2, AnyTLS, and Snell alongside Shadowsocks, ShadowsocksR, HTTP(S), and SOCKS5. == Richer Configuration Imports == Bring in servers and configurations through links, files, or QR codes, including supported content from Clash/Mihomo configurations. == Easier Subscription Management == Update remote configurations, nodes, and rule resources while retaining your local changes to subscribed configurations. == Flexible Routing == Switch between Rule, Global, and Direct modes, manage policy groups, and install community rule sets. == Live Connection Details == See live traffic, active connections, matched rules, and proxy chains. == Redesigned Interface and Quick Controls == A redesigned home screen and setup guide, refreshed Home Screen widgets, and a Control Center connection toggle on iOS 18 and later. Thanks for using Potatso! Send feedback in the app or contact hi@potatso.com.

Potatso 3.0 brings a new core and a redesigned experience. == New Engine, More Protocols == Use VLESS (including Reality), VMess, Trojan, Hysteria2, AnyTLS, and Snell alongside Shadowsocks, ShadowsocksR, HTTP(S), and SOCKS5. == Richer Configuration Imports == Bring in servers and configurations through links, files, or QR codes, including supported content from Clash/Mihomo configurations. == Easier Subscription Management == Update remote configurations, nodes, and rule resources while retaining your local changes to subscribed configurations. == Flexible Routing == Switch between Rule, Global, and Direct modes, manage policy groups, and install community rule sets. == Live Connection Details == See live traffic, active connections, matched rules, and proxy chains. == Redesigned Interface and Quick Controls == A redesigned home screen and setup guide, refreshed Home Screen widgets, and a Control Center connection toggle on iOS 18 and later. Thanks for using Potatso! Send feedback in the app or contact hi@potatso.com.

In this update, we're bringing a brand new "Profile" feature for Pro subscription users. Now you can create and switch between different profiles (containing servers, rules, and related settings combinations) through the top-left corner of the home page. Whether it's for work, daily use, or different network environments, you can easily handle it all. This feature aims to reduce the hassle of frequently modifying settings, making network switching more efficient, clear, and controllable. If you have any suggestions or questions during use, please feel free to contact us through in-app feedback or by sending an email.

Fixed incorrect connection status when coming back from the background.

This update brings you with some fixes and improvements.

In this update, we’ve added the following improvements: • Added support for the Shadowsocks SIP002 URI format. You can now import SIP002 links via Shadowsocks URLs, QR codes, or subscriptions. • Improved the import experience for other link formats. If you encounter any issues importing proxy configurations, feel free to email us at hi@potatso.com.

Fixed iOS 17 database error. If you have any questions, please contact hi@potatso.com

With this update, we're bringing you some updates and performance improvements: • Fixed app crash issue. If you still have issues, please send a report to hi@potatso.com

With this update, we're bringing you some updates and performance improvements: • Fixed app crash issue. If you still have issues, please send a report to hi@potatso.com

With this update, we're bringing you some updates and performance improvements.

With this update, we're bringing you some updates and performance improvements: • Fixed iOS 17 crash bug

With this update, we're bringing you some updates and performance improvements: • Added iOS 26 support • Added speed test feature for pro users

With this update, we're bringing you some updates and performance improvements. • The app now provides an option to remove the ads. This is so far the only way to support us for further development. • We've improved stability and performance of socks and https proxy with a new internal engine. If you have any issues, please let us know.

The update brings you back the new home screen widget as well as the new iOS 18 control center controls.

This update includes performance improvements and bug fixes to make Potatso better for you. Feel free to drop us a message (email: hi@potatso.com) for any feedback.

This update includes performance improvements and bug fixes to make Potatso better for you. Feel free to drop us a message (email: hi@potatso.com) for any feedback.

This update includes performance improvements and bug fixes to make Potatso better for you. Feel free to drop us a message (email: hi@potatso.com) for any feedback.

This update includes performance improvements and bug fixes to make Potatso better for you, specifically: • Fixed an issue that network may get lost when switching between cellular and Wi-Fi Feel free to drop us a message (email: hi@potatso.com) for any feedback.

This update includes performance improvements and bug fixes to make Potatso better for you. Feel free to drop us a message (email: hi@potatso.com) for any feedback.

With this update, we're bringing you some exciting new features and changes. ===================== ===== What's New ===== ===================== • The app will support iOS 13+ from now on. • We're introducing the brand new logo with clarity and simplicity. • We've redeisnged the whole UI to improve your using experience. • Some other internal performance improvements and bug fixes.