- Numerous stability improvements and bug fixes.

- Dark mode is now supported across the app. - New color and color-temperature controls for smart bulbs. - Smart thermostat controls now work reliably in every mode. - Camera live view, playback, and setup are smoother. - Camera firmware updates can now be viewed and applied from the app. - New step-by-step NFC tag shortcut wizard. - Watch app displays more panel types, partitions, and zones. - Scene builder is smoother and more accurate across partitions. - Notification delivery and appearance are more consistent. - Numerous stability improvements and bug fixes.

- Fixed a bug that caused the EULA acceptance screen to have buttons that matched the toolbar and were therefore impossible to see. - Resolved issues with two-way voice on certain doorbells. - Better handling of camera checking during enrollment against plan counts. - Resolved a bug for camera speaker settings on newer cameras. - Added initial scene name editing during creation. - Resolved an issue that prevented most z-wave devices from launching into their respective UIs from the device screen. - Resolved an issue that prevented certain camera provisioning attempts from succeeding. - Misc. bug fixes and improvements.

- Improved chime on open/close support. - Sending silence trouble beeps request now informs user that the request was sent. - Resolved issue where cancel/confirm feature setting wasn't captured in certain instances. - Improved chime managment support for partitioned systems. - Resolved a bug that prevented the global chime from showing the correct state. - Event log users should now match other platforms/clients. - Fixed a bug resulting in stalling when enrolling Onvif cameras. - Resolved a crash when removing an Onvif camera. - Resolved an issue where renaming a zone could see it flash back to the previous name due to a race condition with requesting the cached name immediately after. - Misc. bug fixes and improvements.

- Event log username alias lookup fix.

- Resolved an issue that could result in the wrong user alias showing in the event logs on certain devices.

- Misc. bug fixes and improvements.

- Resolved a crash that could occur when trying to manage certain cameras. - Improved zone/user information population in event logs. - Certain cameras will no longer show the disabled record button if that feature isn't supported at all. - Legacy panels now show some version and system information in the settings. - Demo mode user management crash and bug fixes. - Improved handling of a Z-wave related "Not Responding" text to prevent it from flashing and showing when a value was nil. - Watch app stability improvements. - Minor watch app UI changes to better support smaller watch screens. - Improved handling of session tokens. - Added AI notification handling from certain cameras. - Fixed an issue causing z-wave device battery icons to show when they weren't necessary. - Fixed a bug that caused multiple camera images to temporarily show in a single camera's cell when loading. - Zone names should now show correctly in the event log when supported. - Added support for new camera types. - The watch app should no longer show duplicate device entries. - Demo mode will now show the dealer info section. - Cleaned up some commands that were incorrectly being sent to the wrong panel types. - Peripherals and zones should not disappear anymore. - Demo mode notification issues resolved. - Resolved some issues preventing peripherals from being correctly shown on certain panels when they should be. - Added panic notification support. - Added support for new panel types with partition support. - Misc. bug fixes and improvements.

- Improved peripheral trouble handling. - The silence troubles button should now always be shown on the trouble screen. - Certain panel types will now let you associated them with ONVIF/RTSP cameras where supported. - Added support for "snoozing" a walkthrough after initial dismissal on certain panels. - Misc. bug fixes and improvements.

- Resolved an issue preventing manual unbypassing bypassed zones on an older panel type.

- Added support for unbypassing bypassed zones manually on newer panel types. - Fixed some issues around event logs in Demo Mode including their persistence once you log out. - Event logs should now be pulled for all panel types. - Resolved an issue in the system selection popup that prevented certain systems from showing their current armed state. - Resolved an issue that prevented door lock logs from populating. - Added theme change support to a view controller where it was missing (used by the Events screen/tab). - Added watch support. - Crashing bug fixes. - Misc. bug fixes and improvements.

- Fixed an issue on iOS 18 iPad devices where a new tab bar style prevented system switching. - Resolved a login screen prompt issue related to connectivity. - Misc. bug fixes and improvements.

- Crashing bug fixes. - Misc. bug fixes and improvements.

- Fixed an issue that could lead to z-wave thermostats to flicker values for it's temperature based on incoming reports in different scales. - Crashing bug fixes. - Misc. bug fixes and improvements.

- Crashing bug fixes. - Misc. bug fixes and improvements.

- Crashing bug fixes. - Misc. bug fixes and improvements.

- Crashing bug fixes. - Misc. bug fixes and improvements.

- Fixes some UI issues around the Adaptive Brightness and LED settings where applicable. - Where applicable, remove stored pin when an invalid pin is used. - Resolves an issue where certain camera event logs may disappear and addresses an issue where the activity indicator in the same view may behave erratically. - Fixes an issue for certain cameras that didn't allow them to continue streaming if they had been backgrounded in the live view player. - Resolves an issue where clicking on a video notification when you were previously in the live video player could cause playback issues for the notification camera or not show the appropriate camera and require the user to relaunch the live view player. - Improved camera enrollment procedures for certain cameras. - Resolved an issue resulting in the validation step getting stuck on newer panels when trying to reset them. - Resolves a z-wave filtering issue that was occurring for some binary switches. - The event view controller's navigation bar no longer squeezes. - Reworded Reset panel options to be more consistent across devices. - Fixes an issue where event date wouldn't be displayed for certain cameras - Misc. bug fixes and improvements.

- Added a manual button for login via biometrics. - Improvements to scene management performance and process messaging. - Fixed broken arming levels in Demo Mode. - The app will no longer allow you to launch in landscape mode on iPhone devices, preventing odd UI bugs that require a restart of the app to fix. - Resolved arming bar icon flickering in the arming bar during entry/exit delay for certain panel types. - Misc. bug fixes and improvements.

- Added support for future platform features and devices. - Resolved a data subscription bug that could have several unintended consequences. - Added a check on the panel user edit screen to validate the pin to account for a use case where the minimal pin length has changed. - Added some iconography to the main settings navigation menu. - Removed some legacy permission checks that could result in z-wave configuration options and other settings from not being accessible to certain users. - Resolved an issue that could result in certain device users not seeing the appropriate device settings options. - Resolved issue with event logs on certain devices. - Improve arming bar loading performance on certain devices. - Miscellaneous bug fixes and improvements.

- Resolved issue with a certain permission message that was showing incorrectly. - Resolved a crash that happens when trying to view licenses. - Fixed a bug that could result in legacy Virtual Keypad views from being shown correctly. - Resolved C+Pro & BAT-Mini event log issues. - Fixed an issue with the "Events" icon that caused it to display incorrectly on the "More" screen. - Resolved a tab sorting bug where the names would change while sorting. - Miscellaneous bug fixes and improvements.

- Improved initial arming bar loading behavior. - Additional partition/panel user improvements and fixes. - Resolved some issues with keyfob assignment. - Fixed some issues with panel user creat/edit. - Add the ability to link many users to one panel user. - Pin code issue resolved. - Grant access to the C+P device after user creation when in by device context. - Resolve some disarming via biometrics issues for C+ Pro. - You should no longer be able to "Remove" the onboard siren of the C+ Pro. - Resolved an issue that could result in a walkthrough showing when the user has to accept the EULA. - Resolved some camera wifi reconfiguration issues. - Resolved a crash during user linking. - Enables editing of interactive C+P users whose access has been denied. - Resolved a BAT-Mini zones status bug. - BAT-Mini disarm with biometrics disabled. - Added support for Activity/Privacy zones on certain cameras. - Cancel/Confirm support improvements. - Resolved some audio setting issues and inconsistencies on certain cameras. - Added doorbell ringtone setting support for certain doorbells. - Improved initial panel user linking on certain panels. - Improved pin code prompts on certain panels. - Arming bar skeleton animation loading improvements. - The minimum pin length requirement is now set dynamically in accordance with the panel. - Update WTP Walkthrough verbage on some screens. - WTP Enroll Mode enforcement before sensor enrollment. - Heat sensor can now be added to C+ panels. - Bugfix for save button on edit panel user screen. - Default settings/permissions alignment for panel users. - Removed "Zone" WTP token default. - Resolved orange dot issue for C+ Pro. - Updated Settings flow & support on certain cameras. - Touchpad renaming bug fixed. - Barcode/QR scanner camera initialization post permission prompt bug fixed. - Fixes a two Link panel user issues. - Renames "Chatty" to "Continuous Activity". - Miscellaneous bug fixes and improvements.

- Resolved a crashing bug on certain devices.

- Resolved a bug that can prevent arming/disarming of certain devices.

- Resolved an issue where notification badging can break down when the app is in a background state. - Resolved sorting order of arming level items to prioritize Away/Stay. - Misc performance improvements and bug fixes.