Fix the issue of misaligned scrollbars in some system versions.

1. Change the default value of the joystick mode to 2. 2. Fix the issue where setting the EXP value to a negative number in the DR and EXP function menus causes some functions to malfunction. 3. Fix the problem where the firmware version display is reset to 0 after resetting the parameters.

Newly added "Auxiliary Channel" CH1-CH4 data settings. Optimized the interaction interface.

Fix the display issue of the DR.EXP curve. Add a feature for the scroll bar to always be displayed. Add the display of the currently selected model. The current model name will be shown only when the flight mode is "NORM" and a model has been selected.

Correct the translation text "Version". Fix the compatibility issue of data reading for T8FB firmware versions below 560 or T8S firmware versions below 880.

Add a prompt to press the fine-tuning button to confirm when connecting via Bluetooth. Fix the issue with the display of the return voltage.

Fix the issue of language switching within the APP and the problem of abnormal display of prompt content.

Note: This firmware includes a lot of new features. Please read the firmware instructions carefully before upgrading. 2. Upgrade: "Fine-tuning Settings", add a fine-tuning switch, allowing the fine-tuning function to be turned off through software. 3. Upgrade: "Fixed-wing Menu", merge "Attitude Selection", "Elevon Mixing Control", and "V-tail". 5. Upgrade: "Throttle Curve", add switches (SWA-SWC) and flight conditions (COND), up to four curves. 6. New addition: "Pitch Curve", with the inclusion of switches (SWA-SWC) and flight conditions (COND), up to five types of curves. 7. Upgrade: "Rudder Size Curve", add switches (SWA-SWC) and flight conditions (COND), up to five curves. 8. Upgrade: "Rudder Curve for Large and Small Rudder", add three curves of UP, CENT, and DOWN in the switch (SWA-SWC) mode. 9. New addition: "Tilt Ratio". If you need to open the "Pitch Curve", you must select "Tilt Disk". 10. New addition: "Gyroscope Sensitivity", with two modes available: "Standard" and "Gyro". 11. New addition: "Flight Mode", in addition to the normal mode, four modes, namely "IDLE1", "IDLE2", "IDLE3", and "HOLD", have been added. 12. New addition: "Throttle Settings", including "Throttle Hold", "Throttle Off", and "Throttle Idle". 13. Modification: Due to the addition of new functions, the data volume will increase. Therefore, when writing data to the APP, there will be seven "beeps" to indicate that all data has been written. 14. Improvement: Transform most of the numeric setting menus into drop-down menus for more convenient settings. Improvement: Change the long menu interface to a vertical scroll display, allowing page flipping by swiping up and down. 16. Improvement: Add the advanced menu to the function menu button and navigate through it by swiping to turn pages. 17. New addition: After setting the "Flight Mode", the position where the model name is displayed will show four modes: "IDLE1", "IDLE2", "IDLE3", and "HOLD". 18. New addition: Multiple languages, including: Simplified Chinese, Traditional Chinese, English, Spanish, German, French, Italian, Turkish, Russian, Japanese, and Korean.

Reminder: This firmware has added many functions. Please read the firmware instructions carefully before upgrading. 2. Upgrade: "Fine-tuning Settings", add a fine-tuning switch, allowing the fine-tuning function to be turned off through software. 3. Upgrade: "Fixed-wing Menu", merge "Attitude Selection", "Elevon Mixing Control", and "V-tail". 5. Upgrade: "Throttle Curve", add switches (SWA-SWC) and flight conditions (COND), up to four curves. 6. New addition: "Pitch Curve", with the inclusion of switches (SWA-SWC) and flight conditions (COND), up to five types of curves. 7. Upgrade: "Large and Small Rudder Curves", add switches (SWA-SWC) and flight conditions (COND), up to five curves. 8. Upgrade: "Rudder Curve for Large and Small Rudder", add three curves of UP, CENT, and DOWN in the switch (SWA-SWC) mode. 9. New addition: "Tilt Ratio". If you need to open the "Pitch Curve", you must select "Tilt Disk". 10. New addition: "Gyroscope Sensitivity", with two modes available: "Standard" and "Gyro". 11. New addition: "Flight Mode", in addition to the normal mode, four modes, namely "IDLE1", "IDLE2", "IDLE3", and "HOLD", are added. 12. New addition: "Throttle Settings", including "Throttle Hold", "Throttle Off", and "Throttle Idle". 13. Modification: Due to the addition of new functions, the data volume will increase. Therefore, when writing data to the APP, there will be seven "beeps" to indicate that all data has been written. 14. Improvement: Transform most of the numeric setting menus into drop-down menus for more convenient settings. Improvement: Change the long menu interface to a vertical scroll display, allowing users to flip pages by swiping up and down. 16. Improvement: Add the advanced menu to the function menu button and navigate through it by swiping to turn pages. 17. New addition: After setting the "Flight Mode", the position where the model name is displayed will show four modes: "IDLE1", "IDLE2", "IDLE3", and "HOLD". 18. New addition: Multiple languages, including: Simplified Chinese, Traditional Chinese, English, Spanish, German, French, Italian, Turkish, Russian, Japanese, and Korean.

The size rudder switch item adds SWB option. Fixed the issue of fine-tuning the stepper setting range. Solve known problems.

The size rudder switch item adds SWB option. Fixed the issue of fine-tuning the stepper setting range.

- Added mechanical fine-tuning steps 1~20

- Optimize the display order of the Bluetooth selection list and fix the missing name of the remote control Bluetooth in the new version. - Fixed some system crashing issues.

- Adjust the adjustable range of left and right travel in the basic menu from 0 to 120

-Send and receive mechanical fine-tuning data and save model files. - Display mechanical fine-tuning in "System Settings". -Add "auxiliary channels" in the order: SwA, SwB, VrA, VrB/SwC, midpoint, Lock-C - Added display of the currently selected model file. - Model file "Create" feature moved to "Load model" screen.

- Fixed issue with inaccurate emission voltage display. - Optimize input value display.

- Fixed numeric symbols displayed in channels 5-8. - Fixed incorrect description of individual text. - Optimized the problem of blocking input by keyboard. - Optimized the light color of text in dark mode.

Added receiver voltage alarm value setting. The optimized application interface displays that hybrid control 1-4 is unified managed in the "Hybrid Control Settings" menu, and advanced options such as system Settings are transferred to the sidebar of the "Hybrid Control Settings" menu. In the "System Settings" menu, you can manage auxiliary functions, set various alarm values and view version information.

Fixed the reverse display of rudder quantity in channels 5-8. Fix APP flash backoff caused by known problems.

- Fixed an issue where parameters could not be set after connecting the T8S remote control.

- Added model deletion function. Left swipe in the load model list to delete the model.

- Added throttle curve and rudder curve.

- Fixed Auxiliary Settings being out of sync in System Settings 1 and 2.

- Added mixing control three, four Settings function. - Fixed known issues.

- Fixed language scrambling after installation by new users.