Revo Scan-3D scanner app

Name: Revo Scan-3D scanner app
Rating: 2.6 (31 reviews)
Author: Revopoint 3D Technologies Inc.

3D Scan APP

Free

31 Ratings
Age Rating

4+
Years
Category

Utilities
Developer

Revopoint 3D Technologies Inc.
Language

EN
+ 11 More
Size

65.3
MB

Connect your Revopoint 3D scanner to your iPhone (Wi-Fi only), and get scanning without complex preparations or professional scanning skills. With Revo Scan and Revopoint 3D scanners, you can scan complex-shaped objects, tiny objects, large objects, or even people in full lifelike color. After finishing the scan, Revo Scan 3D automatically processes the scanned 3D data to generate high-precision 3D models, which can be exported as OBJ, STL, and PLY formats. Whether you're an artist looking to turn your 3D creative designs into reality or an engineer making prototypes, Revo Scan provides a fast and smooth scanning experience.

Ratings & Reviews

2.6

out of 5

31 Ratings

App could use improvments
02/22/2024

Mkaufer05
I noticed when you use the app with the scanner, and also use it to convert it to a Mesh, it is very low quality, as compared to the Desktop App , and also there is no way to change the Mesh settings to be able to create a higher quality file. I hope in next update , you add the function of being able to save the file in higher quality Mesh file.
App could use improvments
02/22/2024

Mkaufer05

I noticed when you use the app with the scanner, and also use it to convert it to a Mesh, it is very low quality, as compared to the Desktop App , and also there is no way to change the Mesh settings to be able to create a higher quality file. I hope in next update , you add the function of being able to save the file in higher quality Mesh file.
Bad directions but works as should
03/26/2022

piraxchild
I bought the pop2 Kickstarter version so at the time of receiving mine, directions on connecting to the app were a little confusing. I recommend connecting to a pc first and trying the computer program version downloaded from the Revopoint site to verify the camera works. Afterwards disconnect the camera from the pc and plug it into a wall charger. Go to your WiFi settings on your iPad/iPhone and look for the Pop address to show up. Type in the camera password. Launch the app and it should connect to the camera when you tap the New Scan button. To save out the scan, make sure the cloud point data is fused and then convert it to the mesh( I found the buttons on the left hand side after completing the scan. You will need to have something like Dropbox installed in order to save the scan off your device so you can access it. To save out tap on projects, select your scan, then share it to a file share.
Bad directions but works as should
03/26/2022

piraxchild

I bought the pop2 Kickstarter version so at the time of receiving mine, directions on connecting to the app were a little confusing. I recommend connecting to a pc first and trying the computer program version downloaded from the Revopoint site to verify the camera works. Afterwards disconnect the camera from the pc and plug it into a wall charger. Go to your WiFi settings on your iPad/iPhone and look for the Pop address to show up. Type in the camera password. Launch the app and it should connect to the camera when you tap the New Scan button. To save out the scan, make sure the cloud point data is fused and then convert it to the mesh( I found the buttons on the left hand side after completing the scan. You will need to have something like Dropbox installed in order to save the scan off your device so you can access it. To save out tap on projects, select your scan, then share it to a file share.
Very Disappointed. Software Basically Unusable
10/19/2023

kluke3
This app is terrible. I have issues with connecting to the scanner, then performing the scans.I connect power to the unit and wait about 30 seconds. Then I connect to the scanner’s WIFI. Then I open the RevoPoint app. Fir a very, very long time, up to 7 minutes, the app says, “No scanner detected. Connect a scanner.” Finally if/ when it connects, I get to the section where you set the scan settings. Once i do that and then press the button to start the scan, I get 4 spinning red dots, and one of two things happens:1. In up to 5 minutes, the 4 round dots go away, and I can scan.2. The spinning red dots never go away. Then I force close the software and start all over again. Sometimes I’m not able to get it to scan no matter what I do.This does not happen on the computer app. I’m running IOS 16 on an iPhone 13. I do not remember this happened when I first got the device. 2 things changed since then, a scanner firmware update, and updating to IOS 16.Once I do get a scan going, the phone app does have significantly more trouble keeping tracking of the object than on the computer. I tested this by scanning the same object using both methods.Also, not related to this app, but it seems this device in general, works much better when the scanner is stationary, but the scanned object is placed on a rotating platform. Unfortunately this isn’t always feasible unless you are scanning a small object.
Very Disappointed. Software Basically Unusable
10/19/2023

kluke3

This app is terrible. I have issues with connecting to the scanner, then performing the scans.I connect power to the unit and wait about 30 seconds. Then I connect to the scanner’s WIFI. Then I open the RevoPoint app. Fir a very, very long time, up to 7 minutes, the app says, “No scanner detected. Connect a scanner.” Finally if/ when it connects, I get to the section where you set the scan settings. Once i do that and then press the button to start the scan, I get 4 spinning red dots, and one of two things happens:1. In up to 5 minutes, the 4 round dots go away, and I can scan.2. The spinning red dots never go away. Then I force close the software and start all over again. Sometimes I’m not able to get it to scan no matter what I do.This does not happen on the computer app. I’m running IOS 16 on an iPhone 13. I do not remember this happened when I first got the device. 2 things changed since then, a scanner firmware update, and updating to IOS 16.Once I do get a scan going, the phone app does have significantly more trouble keeping tracking of the object than on the computer. I tested this by scanning the same object using both methods.Also, not related to this app, but it seems this device in general, works much better when the scanner is stationary, but the scanned object is placed on a rotating platform. Unfortunately this isn’t always feasible unless you are scanning a small object.
Works to a degree
12/10/2023

Jim to the P
The scanner works fine on a laptop, but I bought the portable scanner to use with my phone. I have to connect the scanner to the app via WiFi and it barely works, or more often simply doesn’t. The iPad Pro, iPad Air, and iPhone 15 add have USB C, it’s high time that these guys modify the app to use USB support so we don’t have to try to rely on the extremely spotty WiFi connection to the app.

Developer Response
Thank you for your comment, a stable power supply leads to a more stable connection, and a wired connection is in our subsequent development.
Works to a degree
12/10/2023

Jim to the P

The scanner works fine on a laptop, but I bought the portable scanner to use with my phone. I have to connect the scanner to the app via WiFi and it barely works, or more often simply doesn’t. The iPad Pro, iPad Air, and iPhone 15 add have USB C, it’s high time that these guys modify the app to use USB support so we don’t have to try to rely on the extremely spotty WiFi connection to the app.
Developer Response 12/19/2023
Thank you for your comment, a stable power supply leads to a more stable connection, and a wired connection is in our subsequent development.

Adds INSPIRE 2 as a supported device.

Version 5.4.2 10/12/2025

Data Not Collected

The developer does not collect any data from this app.

Privacy practices may vary, for example, based on the features you use or your age. Learn More

Accessibility

Information

Seller: Revopoint 3D Technologies Inc.
Size: 65.3 MB
Category: Utilities
Compatibility: Requires iOS 13.0 or later.

iPhone
Requires iOS 13.0 or later.

iPad
Requires iPadOS 13.0 or later.

iPod touch
Requires iOS 13.0 or later.
Languages: English and 11 more

English, French, German, Italian, Japanese, Korean, Portuguese, Russian, Simplified Chinese, Spanish, Traditional Chinese, Turkish
Age Rating: 4+

4+

Learn More