New Features Support for IWS102 and DWS102 new switches Added dry contact function iOS 26 compatibility Added 4-button switch support Bug Fixes Restricted IWS102 and CS107 from being bound to the "All Lights" group Fixed an issue where adding fixtures on large networks (more than 150 fixtures) shows "all IDs of this mesh network have been used" Fixed DST (Daylight Saving Time) issues for NLC devices; improved time zone selection with support for more time zones Fixed an issue where CS107 requires two taps to toggle lights in the app Fixed an issue where toggling lights via the app was ineffective after binding IWS102 to a group Update "Trigger by none" text to "None (Vacancy)" in Motion Settings Updated default values for PPA109; changed Emergency Power setting default to "None" Various UI display and stability improvements Performance Improved the success rate of adding fixtures and reduced duplicate ID occurrences for large networks (more than 150 fixtures)

New features: The timer interface supports the selection of CS107 Bug modification: Modified text in group member editing interface (changed "member" to "grouped") Address the issue where a prompt box indicating a failure to add lights pops up even though the actual addition of lights is successful Solve the problem that after dimming on the light group page, the offline lights on the main interface turn online The color of the "link" button should be consistent with the theme color Fixed UI flickering when adjusting the color temperature of up/down linear lamps. Solve the problem of incorrect color temperature values when linear luminaires emitting light from both top and bottom are included in the scene

Add the capability to retrieve firmware logs for emergency power supplies Modify the FAQ document address Fix the issue of failing to add lights when multiple fixtures are powered on Resolve potential crashes Resolve the issue where creating regular scenarios may exceed the maximum limit Fix the problem where templates with timers and scenarios cannot be applied multiple times.

New Features: Added a Discover page for easier management of switches, ceiling sensor, and various devices. 3rd party inter-opt bridge can now display complete IP information and MAC address in the app. Group CCT dimming function. Improved success rate for adding lights. Battery wall swicth adds a switch function, with the icon changed to include a battery. Added an automatic status icon 'A' display on the ceiling sensor icon. Data synchronization now uses compression to increase sync speed. Added light addition verification function to resolve potential confusion when adding lights to multiple devices simultaneously. Bug Fixes: Resolved the issue where linking switches to light groups inadvertently triggered linkage. Lights not actually deleted in the mesh network will automatically be re-added to the zone. Fixed the crash issue when starting with many lights or after a period of inactivity. Resolved the problem of needing to delete devices multiple times. Fixed the issue where selected switches were not clearly displayed. Modified the text on the timer page. Fixed the app crashing when entering the edit switch page after deleting a linked light. Resolved the bug where changing the zone name to "My Lights" did not update the navigation bar text. Fixed the issue where modifying the settings for group sensors incorrectly changed the "Disable motion trigger" configuration for lights within the group. Resolved the frequent jumping issue after selecting battery wall switch. Fixed the problem where modifying group members in the app could cause ceiling sensor to exit the group. Resolved the issue of timer binding light group or scene IDs appearing scrambled in the zone data export file. Fixed the display error on the Auto Calibration page. Resolved the issue where newly created zone names could become garbled or change to "My Lights." Fixed the error in displaying the IP address separator on the 3rd party inter-opt bridge interface. Corrected the spelling error on the template interface, changing "skiped" to "skipped." Resolved the issue where clicking "Circadian Rhythms" could lead to a perpetual loading screen. Fixed the issue where selecting a default scene for the timer did not export the corresponding ID. Modified the issue where clicking the switch of ceiling sensor did not respond to lights in the associated group. Changed the icons for template import/export. Fixed the text display issue on the template application interface. IR wall switch now displays when placed inside a switch. Resolved the bug where ceiling sensor could still be controlled when not linked to a group. Resolved the issue of the data export icon displaying as a color block on certain models in the zone list interface. Fixed the problem where the "no network" prompt on the More page always displayed for a few seconds before disappearing when the network is normal. Fixed the crash bug when entering the dimming page from the light group, caused by adding a nil object to the array. Optimized the performance issue when clicking on ceiling sensor.

bug fix

1. The scene interface can support selecting dual tech ceiling sensor. 2. The light group page can display the number of light within each group. 3. Update the new version of the FAQ. 4. UI adjustments for the quick scene creation page, auto-calibration page, and parameter settings page (change the switch button to two separate buttons). 5. Clicking the "Add Light" button on the homepage will pop up a prompt message. Bug Fixes: 1. The timer editing save action will show a pop-up prompt. 2. Change the prompt text when saving light group edits. 3. Restore the DLH settings interface, changing the time unit to seconds. 4. Fix the issue with the subgroup display at the bottom of the light group dimming interface. 5. Fix the issue where entering the dimming page for RGB light groups changes it to a single light page. 6. Resolve the occasional issue of incorrect fixture types. 7. Fix the issue where the DLH switch button and settings button are reversed in the dual tech ceiling sensor settings interface. 8. The PC sensor light settings page does not need the DLH settings button.

1. Allow linkage while disable local motion sensor. 2. Template for quick parameter settings. 3. Up and down light. 4. Disable BLE in adding light page. 5. Allow select all in deleting light page. 6. CS107S sensor. 7. Show lights number in zone list 8.Allow user to add zone to QRCommander Projects. 9. Add FAQ under more 10. bug fix

1. Optimize the adding light process. If the selected light fails to be added, prompt to continue adding the failed lights, repeating the operation until all are added successfully. 2. Add a double-click flashing feature for lights on the homepage. 3. Add a search function on the nearby lights page. 4. Introduce a smart name recommendation feature when renaming lights. 5. Optimize the scanning animation on the switch scanning interface. 6. Bug fixes.

Add the function to retrieve logs Adjust welcome page images and some UI elements Fix bugs

1. Keep the exported data time same as APP display. 2. Optimize the database storage.

1. Change APP icon 2. Change APP name from Genio Stanpro to Stanpro Genio

bug fix