Transformer Calc NEC

NEC Art.450 kVA & OCPD

$0.99 · In‑App Purchases · Designed for iPad. Not verified for macOS.

Transformer Calc NEC - professional NEC calculator for electricians. Offline, permit-ready. NEC transformer overcurrent protection calculator for electricians, apprentices, and electrical engineers. Size primary and secondary OCPD per NEC Table 450.3(B), calculate full-load amps (FLA), and select conductors from Table 310.16 - all per NEC 2023 (NFPA 70). Works 100% offline on the job site. Whether you're sizing overcurrent protection for a 75 kVA, 480-to-208V three-phase transformer, or checking if primary-only protection requires 125% or 300%, this calculator gives you accurate NEC-compliant results in seconds. Use it as your go-to transformer protection reference - from kVA rating to OCPD and conductor selection. TRANSFORMER CALCULATOR FEATURES: - Primary overcurrent protection per NEC 450.3(B) - 125%/167%/250%/300% rules - Secondary overcurrent protection per NEC 450.3(B) - 125%/167%/250% rules - Primary-only and primary+secondary protection methods - Full-load ampere (FLA) calculation: single-phase and three-phase - Next-standard-size-up applied only where Note 1 permits (125% cells); 167%/250%/300% treated as ceilings - All standard OCPD ratings per NEC 240.6(A), including fuse-only ratings 1, 3, 6, 10, 601 for small transformers - Conductor sizing from NEC Table 310.16 (75°C column, printed code values) - Copper and aluminum conductor support - 40 standard kVA ratings: 0.05–500 kVA single-phase, 3–2500 kVA three-phase - 7 voltage presets: 120V, 208V, 240V, 277V, 460V, 480V, 600V - Single-phase and three-phase support - NEC article references for every calculation result NEC REFERENCES INCLUDED: - NEC Table 450.3(B) - Transformer overcurrent protection (600V or less) - NEC 450.3(B) Note 1 - Next-size-up rule for primary-only protection - NEC 240.6(A) - Standard overcurrent device ratings - NEC Table 310.16 - Conductor ampacity at 75°C PROTECTION METHOD RULES (printed Table 450.3(B)): - Primary Only, 9A or more: 125% maximum — next standard size up permitted (Note 1) - Primary Only, 2–9A: 167% maximum — ceiling, no round up - Primary Only, under 2A: 300% maximum — ceiling, no round up - Primary + Secondary: primary 250% maximum (ceiling); secondary 125% (Note 1) for 9A or more, 167% ceiling under 9A CALCULATION RESULTS INCLUDE: - Primary full-load amps (FLA) with formula - Secondary full-load amps (FLA) with formula - Primary OCPD size (standard rating per NEC 240.6(A)) - Secondary OCPD size when applicable - Primary and secondary conductor sizes with ampacity - Applicable NEC percentage rules and references - Protection method notes and explanations PRO FEATURES (one-time purchase): - No ads - clean interface for professionals - Save transformer calculation history with labels - Export calculations as PDF reports for permits and records - Dark theme support HOW THE TRANSFORMER CALCULATOR WORKS: 1. Select phase type (single-phase or three-phase) 2. Choose kVA rating from standard sizes 3. Select primary and secondary voltage 4. Choose protection method (primary only or primary + secondary) 5. Select conductor material (copper or aluminum) 6. Get OCPD sizes, conductor recommendations, and NEC references instantly BUILT FOR ELECTRICIANS ON THE JOB SITE: This transformer calculator is designed by electricians, for electricians. Enter your transformer parameters, get the correct OCPD size and conductor recommendation instantly - no complicated menus or unnecessary features. One-hand operation, instant results. PERFECT FOR: - Licensed electricians sizing transformer protection daily - Electrical apprentices studying for journeyman exams - Electrical engineers and designers - Electrical contractors bidding jobs - NEC code exam preparation - Journeyman and master electrician exam study OFFLINE & PRIVACY: - Works 100% offline - no internet needed on the job site - No account required - No data collection - your calculations stay on your device Simplify your transformer protection sizing on the job site.

Ratings & Reviews

  • This app hasn’t received enough ratings or reviews to display an overview.

What's new: • 167%/300% rules now follow the printed Table 450.3(B): ceilings without round-up (Note 1 applies to 125% cells only) • Fuse-only ratings 1, 3, 6, 10, 601 per NEC 240.6(A) — correct OCPD for small transformers • Conductor table corrected to the printed NEC 310.16 75°C values • 600V preset added; 40 standard kVA ratings listed Thanks for using ElecTools! Send feedback to support@tradetools.dev.

Version 1.0.8

The developer, Rizvan Adzhoian, indicated that the app’s privacy practices may include handling of data as described below. For more information, see the developer’s privacy policy .

  • Data Used to Track You

    The following data may be used to track you across apps and websites owned by other companies:

    • Identifiers

  • Data Not Linked to You

    The following data may be collected but it is not linked to your identity:

    • Identifiers
    • Usage Data

Privacy practices may vary, for example, based on the features you use or your age. Learn More

Accessibility

The developer has not yet indicated which accessibility features this app supports. Learn More

Information

Seller
  • Rizvan Adzhoian
Size
  • 35.4 MB
Category
  • Utilities
Compatibility
Requires iOS 13.0 or later.
  • iPhone
    Requires iOS 13.0 or later.
  • iPad
    Requires iPadOS 13.0 or later.
  • iPod touch
    Requires iOS 13.0 or later.
  • Mac
    Requires macOS 11.0 or later and a Mac with Apple M1 chip or later.
  • Apple Vision
    Requires visionOS 1.0 or later.
Languages
  • English
Age Rating
18+
In-App Purchases
Yes
Copyright
  • © 2026 Rizvan Adzhoian
  • Developer Website
  • Privacy Policy

    • More by Rizvan Adzhoian