Improvements - Added a context menu with client actions to the device detail > clients list. - Added support for adopting multiple U5G devices in LAN mode. - Improved search in Settings. - Improved the WiFi statistics shown for TX retries and Air Stats on Network application 11. - Improved scrolling layouts so content stays easy to read on wide screens. - Improved the "Report to UniFi R&D" error reporting. - Improved the Network and VPN form so it no longer stops when subnet suggestions fail to load. - Improved remote console connection reliability after network changes. - Improved the sign-in flow so the connection stops properly after you cancel MFA or access is denied. - Improved UPS Battery Self-test so it is only offered on supported Network versions. - Improved Shadow Mode setup so it uses the correct Network session. - Improved support for custom antennas. - Improved error handling in UTR screen settings. - Improved stability. Bugfixes - Fixed an issue where device setup pop-ups did not appear. - Fixed an issue where the console connection failed after signing in with Direct Connect following offline setup. - Fixed an issue where local access setup of UX7 and UDR7 consoles could fail. - Fixed an issue where the Control Plane could not be opened for UNAS, UNVR and other consoles. - Fixed an issue where saving Settings > System failed. - Fixed an issue where the WireGuard server public key could be lost when editing a WireGuard server. - Fixed an issue where the Next Update firmware lists in Device Updates were empty. - Fixed an issue where the ISP speed test upload history and latency charts showed incorrect colors. - Fixed an issue where the power controls for USP Plug outlets were missing in device details. - Fixed an issue where application names and icons were missing from client traffic. - Fixed an issue where site and fabric names could show HTML codes instead of the correct characters. - Fixed an issue where the remote console connection could stop working or fail to start after the connection changed. - Fixed an issue where Virtual Network Override was shown for clients on devices that do not support it.

This release includes a major overhaul of the UniFi Network application experience. It is designed to improve performance when switching between consoles and sites, establishing connections, and loading data. It also addresses long-standing issues around navigation, site switching, and console connection handling. General - Added ability to open any UniFi OS Console's Control Plane (UNVR, UNAS...). - Added handling for console status (showing console restarting, restoring from backup...). - Added checks and informational messages for legacy Network server and Network application versions. - Improved resiliency by opening Control Plane when Network application is unavailable. - Improved support for links that open directly in the Network part of the UniFi app. - Improved Spotlight search for UniFi devices. - Improved localization. - Reworked Network-related app foundation. - Improved reliability of data handling. - Improved connection speed and reliability. - Improved animations and loading. - Improved reliability of switching consoles/sites. - Improved navigation reliability and UX. - Improved app performance. - Improved app stability. Dashboard - Improved loading UI. - Reworked site list and site management. Devices - Reworked device detail. - Improved reliability of displayed information. - Improved UI and animations. - Improved overview by aligning more closely with web. - Improved settings and added new forms. - Added device update action to the context menu in the device list. - Added new access point settings (Low Performance Mode override, Enhanced PoE+ Interoperability). - Added UPS battery self-test settings. - Improved switch power source settings to match the web application. - Improved UniFi LTE settings. Clients - Added Change Icon shortcut in client details. Device Setup - Improved adoption progress indicators. - Improved reliability of firmware updates during device setup. Insights - Improved Ports UI and performance. - Improved Activity by aligning more closely with web. - Added System Log support for older UniFi Network versions. Settings - Added Settings > Objects, with forms to create and edit Secure, Route, and QoS objects. - Added port aggregation setting for the management network. - Added confirmation before Teleport is disabled. - Improved main Settings screen UI. - Improved reliability of showing correct UniFi OS and Network versions in the footer. - Improved CyberSecure main screen. - Reworked CyberSecure > Threat Management. - Improved Policy Engine. - Reworked System settings. UniFi Travel Router - Improved LCM Screen settings with Always On, Raise to Wake, Night Mode, and screen timeout options. - Improved device settings to show the device name and the hostname separately. - Improved client traffic formatting with decimal units. - Improved WAN widget and USB uplink names. - Improved connection monitoring and Wi-Fi join flows. Bugfixes - Fixed remote console sessions ending unexpectedly. - Fixed device list sometimes failing to load. - Fixed device order changing quickly in the device update schedule. - Fixed outlet layouts for power devices. - Fixed SIM widget visibility on UDR 5G Max. - Fixed Internet Activity chart units for WAN activity. - Fixed horizontal scrolling on the Client Detail screen. - Fixed client filtering by last seen time. - Fixed the notifications-disabled banner not updating after returning to the app. - Fixed UNVR setup opening the dashboard before the backup restore was complete. - Fixed several discovery and rediscovery reliability issues, including standalone AP discovery. - Fixed UTR connection and uplink status showing incorrect values after joining a network. - Fixed the UTR Bluetooth signal indicator changing between values repeatedly. - Fixed the UTR sheet in the site picker closing during device discovery. - Fixed Password AutoFill in the UTR Join Wi-Fi flow. - Fixed several UI issues, including filter presentation on iOS 27.

Improvements - Improved UniFi OS update experience.

Improvements - Added Cross-Stack LAG configuration. - Added stack unit reordering, adoption instructions, and pre-adoption details. - Added UX7 Mesh topology and status information to the dashboard. - Improved MC-LAG configuration. - Improved switch stack status and overview details. - Improved the Site Manager experience and ISP logo display. - Improved push notification registration reliability. - Improved the setup experience. - Improved stability. Bugfixes - Fixed device filtering when more than one status was selected. - Fixed Advanced WiFi Auto-Link saving. - Fixed the network name shown for PPSK WiFi. - Fixed inactive links in System Logs. - Fixed duplicated toolbar buttons in some forms. - Fixed reused MFA code handling. - Fixed several Teleport connection and error-reporting issues.

Improvements - Added VLAN conflict warnings to Dashboard and WiFi settings. - Added Pro AV QoS guidance, port grid aggregation, and uplink legends. - Improved reliability when loading Alarm Manager. - Improved app stability. Bugfixes - Fixed setup issues. - Fixed UPS power protection badges.

Improvements - Added Spotlight search for UniFi sites and devices. - Added UPS settings, outlet configuration, battery status, power-failure information, and device details. - Added Device Power Supervisor. - Added saved VPN profiles for Teleport connections created through a bound console on UTR. - Improved VPN profile switching on UTR. - Improved VPN Kill Switch descriptions on UTR. - Improved device-name, network, and authentication validation on UTR. - Improved device discovery to always show UTRs. - Improved installed firmware version presentation on UTR. - Improved WiFi uplink selection text for open networks on UTR. - Improved Bind to Site on UTR. - Improved Shadow Mode support. - Improved High Availability and cloud backup restoration. - Improved Screen settings in Device Details. - Improved the AV Manager experience. - Improved error messages throughout Network settings. - Improved compatibility checks between the app, UniFi Network, firmware, and device capabilities. - Improved connection and reconnection reliability and status feedback. - Improved Control Plane reliability. - Improved Bluetooth status reporting and setup error handling. Bugfixes - Fixed issues when creating or editing Ethernet Port Profiles, including locked profile fields. - Fixed inapplicable Port Settings appearing on AirWire devices. - Fixed UTR password and login dialogs dismissing unexpectedly or remaining visible. - Fixed UTR connections not continuing after entering local credentials. - Fixed UTR VPN and QR scanning issues, including incorrect connection status, invalid-code errors, and a camera-permission crash. - Fixed the WiFi uplink dialog not appearing on newly connected UTRs. - Fixed the UTR firmware update screen becoming difficult to close. - Fixed UTR LAN issues, including DHCP ranges not updating and secondary VLAN collisions. - Fixed site binding controls on UTR. - Fixed UTR captive portal issues, including outdated controls and sheets appearing without a connected uplink. - Fixed UTR console-name issues, including unwanted spaces and changes not appearing in the app. - Fixed the UTR interface becoming unresponsive after losing its connection. - Fixed duplicated toolbar buttons on the primary UTR WiFi screen. - Fixed device radio controls, including inactive radios and incorrect legacy mesh settings. - Fixed WiFi settings failing to load when mDNS information was unavailable. - Fixed PPSK WiFi settings and Passpoint configuration. - Fixed inconsistent console names during setup. - Fixed unsupported console controls and incorrect classification of some UNVR and Protect consoles. - Fixed console timezone handling. - Fixed the console picker not reflecting the connected console. - Fixed 12-hour time and Screen settings on supported devices. - Fixed issues decoding mobile signal, SSL inspection, and device update information. - Fixed incorrect device IP sorting. - Fixed Internet health traffic totals and live throughput presentation. - Fixed speed tests using the wrong WAN connection. - Fixed issues with VPN forms, lists, and navigation. - Fixed missing invitation sender information in Site Manager. - Fixed duplicate sites after an interrupted Site Manager refresh. - Fixed incorrect Power & Resiliency and Band Steering options on UniFi Express. - Fixed IP settings on UniFi Express. - Fixed an incorrect pending-adoption state on UniFi Express. - Fixed dashboard shortcuts sometimes failing to load. - Fixed U5G Backup limits using information from the wrong site. - Fixed various navigation issues.

Improvements - Added support for SSO IdP SAML login. - Improved SSO sign-in, session restoration, email verification and setup flows. Bugfixes - Fixed various issues in setup. - Fixed connection issues after entering local credentials. - Fixed UTR WireGuard QR scanner camera launch issues. - Fixed UTR incorrect VPN connection times shown immediately after connecting. - Fixed UTR WiFi Uplink dialogs not appearing on fresh connections. - Fixed other small UTR issues.

Bugfixes - Fixed widget not appearing or working correctly.

Improvements - Added a Hotspot Portal info link to WiFi settings. - Added support for backing up and restoring individual UniFi OS applications. - Improved Network settings. - Improved Internet settings. - Improved Static Routes settings. - Improved Port Forwarding settings. - Improved Traffic Logging settings. - Improved WiFi settings validation and save behavior. - Improved SFP setup reliability. - Improved UTR password validation. - Improved password recovery email entry. - Improved stability when switching accounts. - Improved Firewall settings and related UI. - Improved eSIM activation resiliency. Bugfixes - Fixed an issue where views may not load in several cases. - Fixed an issue where LED or LCM state could remain stuck after canceling local discovery setup. - Fixed an issue where Mesh Parent could not be disabled. - Fixed an incorrect message during offline UNVR G2 Pro setup. - Fixed missing outlets in the USP Strip outlets grid. - Fixed parsing issues in WiFi settings. - Fixed IGMP proxy WAN behavior. - Fixed MGMT port configuration compatibility. - Fixed IoT channel lock behavior for 2.4 GHz channels. - Fixed several issues in WAN settings, Port Forwarding, SNMP, and Activity Logging. - Fixed U5G feedback form. - Fixed Port Insights UI issues. - Fixed issues in the Shadow Mode setup flow. - Fixed issues in the email verification flow. - Fixed an issue where some device data could fail to load correctly. - Fixed SFP module handling during setup.

Improvements - Added Deep Inspection and Content Filter settings. - Added management and out-of-band port settings. - Added support for improved WAN address selection when configuring a VPN server. - Added 5G device certification message. - Added WiFi uplink flow for joining another network on UniFi Travel Router. - Added Teleport login prompt flow on UniFi Travel Router. - Added Native VLAN and Port Isolation settings to device port settings. - Added WLAN Handoff Suggestions support. - Added automatic eSIM activation and improved eSIM activation state handling for U5G Backup. - Added target version details and confirmation before UniFi app updates. - Added a lock indicator for orchestrated networks in Overview. - Improved UniFi OS settings navigation inside UniFi settings. - Improved WiFi settings to align with newer Network behavior. - Improved device setup and device flow deep linking. - Improved AV Manager Video Wall calibration and grid-size updates. - Improved Direct Connect slideout layout. - Improved gateway displays by showing LAN IP instead of WAN IP. - Improved form sheets, disabled form rows, searchable multi-pickers, and text field row behavior. - Improved password requirements for Brazil. - Improved Travel Router UI and connection handling. - Improved WiFi settings experience with expanded list actions, clearer status handling, and a much more complete WiFi configuration form. - Improved System Logs filtering for devices and clients. - Improved port filtering. - Improved Mesh MLO STR availability based on supported Network versions. - Improved content and security requirements for Brazil on UniFi Travel Router. - Improved slide-out panels, buttons, and empty state styling. - Improved certificate loading behaviour in Control Plane. Bugfixes - Fixed an issue where downlinks could show the wrong port name. - Fixed several fingerprint-related issues. - Fixed an issue where bind-to-site could propagate a disabled primary WiFi status on UniFi Travel Router. - Fixed hostname configuration status handling on UniFi Travel Router. - Fixed an issue where swipe cells could block scrolling inside scroll views. - Fixed VPN clients not showing up in latest Network application versions. - Fixed specific form rows not being disabled correctly. - Fixed system logs and flows loading, filtering, and interaction issues. - Fixed port settings overwriting other port overrides. - Fixed an issue where the WiFi radio band could not stay editable in auto mode. - Fixed an issue where blocked clients could be removed. - Fixed Travel Router Teleport connections failing with a stale device token. - Fixed duplicate eth1 entries when toggling the LAN port with secondary LAN enabled. - Fixed Travel Router async task retention. - Fixed Site Manager host data loading. - Fixed stale orphaned data after object replacement.

Improvements - Improved overall app stability. Bugfixes - Fixed an issue where mesh MLO STR banner was shown twice.

Improvements - Added ability to submit feedback directly from Settings. - Added Saved Networks support on UTR. - Added support for Secondary WiFi and Network on UTR. - Added a Device Password section in Settings to set a custom password on UTR. - Added Country selection in Settings for password compliance on UTR. - Added Teleport support for non-owner users on UTR (requires UniFi OS 5.1.5 or later). - Added release channel selection for UTR. - Added TTL configuration support for UTR. - Added latency reporting for Google, Microsoft, and Cloudflare on UTR. - Added a PoE Passthrough option for standalone devices. - Improved Airtime Utilization chart rendering. - Improved validation in WiFi Doctor. - Improved Settings > Internet on UTR. - Improved WiFi password validation on UTR. - Improved translations. - Improved support for WAN port disable settings. - Improved U7 Mesh experience. - Improved WireGuard VPN configuration file handling. - Improved app reliability when loading device information. - Improved the empty state on UTR when no known networks are nearby. Bugfixes - Fixed several issues in VPN forms. - Fixed an issue where connecting to a WiFi uplink could fail if the password contained special characters on UTR. - Fixed issues with firmware update on UTR. - Fixed incorrect "No Internet" dashboard state on UTR. - Fixed disconnect issues on UTR. - Fixed various other UTR-related issues. - Fixed a crash when opening the site picker. - Fixed an issue where Internet settings could save the wrong Prefix Delegation Size. - Fixed an issue where WireGuard VPN Local IP changes were not saved. - Fixed issues with saved network details and known networks on UTR. - Fixed an issue where the firmware update status on UTR could remain stuck on "Checking for Updates." - Fixed secondary WiFi/LAN broadcast configuration on UTR. - Fixed unwanted BLE auto-reconnect after session invalidation. - Fixed an issue where unavailable LAN speed information could cause incorrect status handling on UTR. - Fixed several crashes related to site picker and connection. - Fixed localization issues. - Fixed presentation issues with device advanced settings. - Fixed issue with AirWire discovery and setup. - Fixed standalone AP showing incorrect RSSI values for clients. - Fixed firmware update confirmation slide-out not dismissing for UTR.

Improvements - Added Airtime Utilization widget to AP device detail. - Improved translations. - Improved Port insights. - Improved WireGuard IPv6 support. Bugfixes - Fixed Alarm Manager not loading in specific cases. - Fixed stability issues. - Fixed navigation issues in Insights. - Fixed issues in WireGuard VPN form.

Improvements - Added new fields under Control Plane > Console Settings (Direct Remote Connection, Support File, About, Reset, Email Service, Analytics & Improvements, SSH, Certificates, Transfer Ownership). - Added Notification Settings to Control Plane. - Added support for device tags. - Added applied filter count to the Customize View row in Flows. - Added NUT Server configuration. - Added a “Having Issues?” form to WiFi Doctor. - Added 12-hour time format support in System Log. - Added action schedules, action validation, and power action support in Alarm Manager. - Added support for displaying the latest events in System Log. - Improved navigation between screens, including animation and stability fixes. - Improved console connection performance and reliability when switching consoles and sites. - Improved Shadow Mode setup experience. - Improved PoE port display in device details. - Improved AP Deployment Density bar behavior. - Improved the Settings screen and navigation to better align with the web Network application. - Improved ISP image accuracy using ASN data. - Improved support for AirWire. - Improved App Store review prompt experience. Bugfixes - Fixed various issues related to console and blueprint setup. - Fixed PoE ports display issue. - Fixed WAN status display issue. - Fixed issues with AFC location. - Fixed specific local consoles not being visible in Site Manager when VPN was enabled. - Fixed crash when switching sites after opening Flows. - Fixed parsing issue in Control Plane related to LED settings.

Improvements - UTR: - Improved captive portal notification behavior (now shown only on open SSIDs). - Improved compatibility for iOS 18. Bugfixes - Fixed issues with SFP wizard. - Fixed issues with blueprint setup. - UTR: - Fixed server address validation in WireGuard form (now supports both hostname and IP address). - Fixed an issue applying the AllowedIPs parameter to WireGuard configuration.

Improvements - Added WiFi Doctor to Dashboard (requires UniFi Network Application 10.1) - Added Storage to Settings > Control Plane - Added support for IPv6 DS-Lite and DS-Lite over PPPoE in Internet settings - Added support for MAC cloning to UTR - Added manual WireGuard configuration to UTR - Added "Kill Switch" to UTR VPN configuration - Added custom firmware updates to UTR - Improved UTR's captive portal detection - Improved Bind to Site user experience for the UTR - Improved compatibility with UniFi Network Application 10.1 - Improved device detail UX - Improved console setup experience - Improved Shadow Mode setup experience - Improved site-to-site VPN settings - Improved device port configuration support - Improved IPS settings support Bugfixes - Fixed wrong client opened in standalone AP settings - Fixed occasional issues with reconnection after coming from background - Fixed certain stability issues

Improvements - Added WireGuard support for the UniFi Travel Router.

Fixes - Fixed stability issues

Fixes - Fixed stability issues

Fixes - Fixed stability issues

Improvements - Improved device detail overview - Improved port aggregation - Added UniFi Play deep linking - Added 802.1x control to switch port configuration Bugfixes - Fixed issues in device detail overview - Fixed redirect to Port Profiles from Insights > Ports - Fixed display list of AP/Switch connected clients

Improvements - Improved Site Manager - Added toggle to switch between list and grid layout - Added error handling for invites - Improved service outage message handling - Improved network and internet connection handling Bugfixes - Fixed a loading issue with standalone APs

Bugfixes - Fixed an issue where device list wouldn't load for some users

Improvements - Added Alarm detail screen. - Added WAN SLA. - Added Device list filter. - Added Traffic Flows detail. - Added Alarm Manager continuous monitoring field. - Improved site switcher. - Improved Device list. - Improved system usage chart in Device detail. - Improved channel usage in Device detail. - Improved device header on Device detail. Bugfixes - Fixed ISP speed validation. - Fixed Alarm Manager loading for view-only users. - Fixed non-Network device row icons. - Fixed MC-LAG crash on open. - Fixed Alarm Wizard navigation. - Fixed Alarm Trigger selection. - Fixed WiFi scheduler loading.

Improvements - Added Traffic Flows coordination. Bugfixes - Fixed an issue where the Alarm Manager may fail to load for users with view-only role.