RST Decoder

Name: RST Decoder
Rating: 2.7 (3 reviews)
Author: koji kamogawa

Образование

Только для iPhone

Бесплатно

Оценок: 3
Возрасты

4+
лет (г.)
Категория

Образование
Разработчик

koji kamogawa
Язык

EN
и еще 1
Размер

5,6
МБ

iPhone

This is an App that decodes Morse code input from the microphone. It is a Morse practice App that you can use to check if you are keying the correct code. Signals with good S/N can be decoded correctly, but signals with bad S/N cannot be decoded correctly. Also, the performance will be degraded for extremely slow or fast signals. Usually about 5 to 10 characters are required for speed synchronization of Morse Code. Adjust the input signal so that the peak value changes from level 6 to level 7. Make fine adjustments to each parameter according to the reception status. [Additional Functions] -In addition to the decoder using BPF, a new decoder using FFT has been added so that it can be switched according to the usage. -AFD (Auto Frequency Detector) function has been added to the decoder using BPF, and BPF can be set automatically by pressing the AFD button. -The decoder using FFT automatically follows the strongest signal in the band by AFD (Auto Frequency Detector) and AGC (Auto Gain Control). You can also hold the AFD / AGC parameters by pressing the Lock button. * There will be a time lag of about 1 to 2 seconds for AFD tracking. [Control parameters] 1. Audio Input Level 2.BPF ON/OFF 3.BPF of Center Frequency 4.BPF of Band Width 5.CW Speed Control ON/OFF 6.CW Speed Control Low, Mid1, Mid2 or High 7.Delete All Decoded Text 8.Realtime CW Signal Display 9.Input signal recording / playback function *Japanese/KANA text is not supported. [Note] Since the signal after BPF is output to the audio output, it can also be used as an AF-CW filter. [URL of this App working example video] https://youtu.be/Pwp7W4m-m34

Оценки и отзывы

2,7

из 5

Оценок: 3

doesn't work((
08.02.2024

alkojazz
shows splash screen and that's it

Ответ разработчика
Is the network connected?If the network is not connected(or using Ad-Blocks), the screen will change after 10 seconds.
doesn't work((
08.02.2024

alkojazz

shows splash screen and that's it
Ответ разработчика 10.02.2024
Is the network connected?If the network is not connected(or using Ad-Blocks), the screen will change after 10 seconds.
Not working
05.12.2023

HornedKavu
It even can’t start, just spinning loader and that is it. Sad

Ответ разработчика
This is a very disappointing report. Please check the following. Are you connected to a network? Or are you using Adblock? From Ver3.1.0 onwards, the app has been modified to start after waiting 10 seconds if the network is not connected.
Not working
05.12.2023

HornedKavu

It even can’t start, just spinning loader and that is it. Sad
Ответ разработчика 07.12.2023
This is a very disappointing report. Please check the following. Are you connected to a network? Or are you using Adblock? From Ver3.1.0 onwards, the app has been modified to start after waiting 10 seconds if the network is not connected.

You can call a decoder that implements the new algorithm.

Версия 3.3.0

23 янв.

Данные, используемые для отслеживания информации

Следующие данные могут использоваться для отслеживания информации о пользователе в приложениях и на сайтах, принадлежащих другим компаниям:
- Геопозиция
- Идентификаторы
- Данные об использовании
- Диагностика
- Другие данные
Связанные с пользователем данные

Может вестись сбор следующих данных, которые связаны с личностью пользователя:
- Геопозиция
- Идентификаторы
- Данные об использовании
- Диагностика
- Другие данные

Разработчик может использовать различные способы обработки конфиденциальных данных в зависимости от таких факторов, как Ваш возраст и функции, которыми Вы пользуетесь. Подробнее